Since commit 01ef0296d2 (".mailmap: add entry for WangYuli") was merged
into mainline, I've received feedback from former colleagues: They believe
the change to .mailmap affects git log based statistics, which in turn
reduces the reported “contributions from uniontech” in the Linux
commit tree, and they think it's difficult to explain to everyone that
future statistics must be generated with the --no-use-mailmap option.
I don't have a strong opinion either way, but since my commit has caused
them trouble, I'm now requesting that this line be removed to bring a
little more LOVE AND PEACE to the world :-)
Link: https://lkml.kernel.org/r/20251208025730.33881-1-wangyuli@aosc.io
Signed-off-by: WangYuli <wangyl5933@chinaunicom.cn>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Hans Verkuil <hverkuil@kernel.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Shannon Nelson <sln@onemain.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the PTE page table lock is acquired by pte_offset_map_lock(), the lock
must be released via pte_unmap_unlock().
However, in damos_va_migrate_pmd_entry(), if damos_va_filter_out() returns
true, it immediately returns without releasing the lock.
This fixes the issue by not stopping page table traversal when
damos_va_filter_out() returns true and ensuring that the lock is released.
Link: https://lkml.kernel.org/r/20251209151034.77221-1-akinobu.mita@gmail.com
Fixes: 09efc56a3b ("mm/damon/vaddr: consistently use only pmd_entry for damos_migrate")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The entry for the Qualcomm bluetooth driver only now got sent upstream and
still has my old address. Update it to use the kernel.org one.
Link: https://lkml.kernel.org/r/20251204104531.22045-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Cc: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Modify the kernel-doc function parameter names to prevent kernel-doc
warnings:
Warning: include/linux/leafops.h:135 function parameter 'entry' not
described in 'leafent_type'
Warning: include/linux/leafops.h:540 function parameter 'pte' not
described in 'pte_is_uffd_marker'
Link: https://lkml.kernel.org/r/20251214201517.2187051-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A KASAN tag mismatch, possibly causing a kernel panic, can be observed on
systems with a tag-based KASAN enabled and with multiple NUMA nodes. It
was reported on arm64 and reproduced on x86. It can be explained in the
following points:
1. There can be more than one virtual memory chunk.
2. Chunk's base address has a tag.
3. The base address points at the first chunk and thus inherits
the tag of the first chunk.
4. The subsequent chunks will be accessed with the tag from the
first chunk.
5. Thus, the subsequent chunks need to have their tag set to
match that of the first chunk.
Use the new vmalloc flag that disables random tag assignment in
__kasan_unpoison_vmalloc() - pass the same random tag to all the
vm_structs by tagging the pointers before they go inside
__kasan_unpoison_vmalloc(). Assigning a common tag resolves the pcpu
chunk address mismatch.
[akpm@linux-foundation.org: use WARN_ON_ONCE(), per Andrey]
Link: https://lkml.kernel.org/r/CA+fCnZeuGdKSEm11oGT6FS71_vGq1vjq-xY36kxVdFvwmag2ZQ@mail.gmail.com
[maciej.wieczor-retman@intel.com: remove unneeded pr_warn()]
Link: https://lkml.kernel.org/r/919897daaaa3c982a27762a2ee038769ad033991.1764945396.git.m.wieczorretman@pm.me
Link: https://lkml.kernel.org/r/873821114a9f722ffb5d6702b94782e902883fdf.1764874575.git.m.wieczorretman@pm.me
Fixes: 1d96320f8d ("kasan, vmalloc: add vmalloc tagging for SW_TAGS")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A KASAN tag mismatch, possibly causing a kernel panic, can be observed
on systems with a tag-based KASAN enabled and with multiple NUMA nodes.
It was reported on arm64 and reproduced on x86. It can be explained in
the following points:
1. There can be more than one virtual memory chunk.
2. Chunk's base address has a tag.
3. The base address points at the first chunk and thus inherits
the tag of the first chunk.
4. The subsequent chunks will be accessed with the tag from the
first chunk.
5. Thus, the subsequent chunks need to have their tag set to
match that of the first chunk.
Refactor code by reusing __kasan_unpoison_vmalloc in a new helper in
preparation for the actual fix.
Link: https://lkml.kernel.org/r/eb61d93b907e262eefcaa130261a08bcb6c5ce51.1764874575.git.m.wieczorretman@pm.me
Fixes: 1d96320f8d ("kasan, vmalloc: add vmalloc tagging for SW_TAGS")
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> [6.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kasan: vmalloc: Fixes for the percpu allocator and
vrealloc", v3.
Patches fix two issues related to KASAN and vmalloc.
The first one, a KASAN tag mismatch, possibly resulting in a kernel panic,
can be observed on systems with a tag-based KASAN enabled and with
multiple NUMA nodes. Initially it was only noticed on x86 [1] but later a
similar issue was also reported on arm64 [2].
Specifically the problem is related to how vm_structs interact with
pcpu_chunks - both when they are allocated, assigned and when pcpu_chunk
addresses are derived.
When vm_structs are allocated they are unpoisoned, each with a different
random tag, if vmalloc support is enabled along the KASAN mode. Later
when first pcpu chunk is allocated it gets its 'base_addr' field set to
the first allocated vm_struct. With that it inherits that vm_struct's
tag.
When pcpu_chunk addresses are later derived (by pcpu_chunk_addr(), for
example in pcpu_alloc_noprof()) the base_addr field is used and offsets
are added to it. If the initial conditions are satisfied then some of the
offsets will point into memory allocated with a different vm_struct. So
while the lower bits will get accurately derived the tag bits in the top
of the pointer won't match the shadow memory contents.
The solution (proposed at v2 of the x86 KASAN series [3]) is to unpoison
the vm_structs with the same tag when allocating them for the per cpu
allocator (in pcpu_get_vm_areas()).
The second one reported by syzkaller [4] is related to vrealloc and
happens because of random tag generation when unpoisoning memory without
allocating new pages. This breaks shadow memory tracking and needs to
reuse the existing tag instead of generating a new one. At the same time
an inconsistency in used flags is corrected.
This patch (of 3):
Syzkaller reported a memory out-of-bounds bug [4]. This patch fixes two
issues:
1. In vrealloc the KASAN_VMALLOC_VM_ALLOC flag is missing when
unpoisoning the extended region. This flag is required to correctly
associate the allocation with KASAN's vmalloc tracking.
Note: In contrast, vzalloc (via __vmalloc_node_range_noprof)
explicitly sets KASAN_VMALLOC_VM_ALLOC and calls
kasan_unpoison_vmalloc() with it. vrealloc must behave consistently --
especially when reusing existing vmalloc regions -- to ensure KASAN can
track allocations correctly.
2. When vrealloc reuses an existing vmalloc region (without allocating
new pages) KASAN generates a new tag, which breaks tag-based memory
access tracking.
Introduce KASAN_VMALLOC_KEEP_TAG, a new KASAN flag that allows reusing the
tag already attached to the pointer, ensuring consistent tag behavior
during reallocation.
Pass KASAN_VMALLOC_KEEP_TAG and KASAN_VMALLOC_VM_ALLOC to the
kasan_unpoison_vmalloc inside vrealloc_node_align_noprof().
Link: https://lkml.kernel.org/r/cover.1765978969.git.m.wieczorretman@pm.me
Link: https://lkml.kernel.org/r/38dece0a4074c43e48150d1e242f8242c73bf1a5.1764874575.git.m.wieczorretman@pm.me
Link: https://lore.kernel.org/all/e7e04692866d02e6d3b32bb43b998e5d17092ba4.1738686764.git.maciej.wieczor-retman@intel.com/ [1]
Link: https://lore.kernel.org/all/aMUrW1Znp1GEj7St@MiWiFi-R3L-srv/ [2]
Link: https://lore.kernel.org/all/CAPAsAGxDRv_uFeMYu9TwhBVWHCCtkSxoWY4xmFB_vowMbi8raw@mail.gmail.com/ [3]
Link: https://syzkaller.appspot.com/bug?extid=997752115a851cb0cf36 [4]
Fixes: a0309faf1c ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Co-developed-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reported-by: syzbot+997752115a851cb0cf36@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e243a2.050a0220.1696c6.007d.GAE@google.com/T/
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If you use an IDR with a non-zero base, and specify a range that lies
entirely below the base, 'max - base' becomes very large and
idr_get_free() can return an ID that lies outside of the requested range.
Link: https://lkml.kernel.org/r/20251128161853.3200058-1-willy@infradead.org
Fixes: 6ce711f275 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6449
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
My linaro address will stop working tonight. Update my mailmap entry.
Link: https://lkml.kernel.org/r/20251128133318.44912-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <brgl@kernel.org>
Cc: Hans Verkuil <hverkuil@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
WARNING: include/linux/genalloc.h:52 function parameter 'start_addr' not described in 'genpool_algo_t'
Fixes: 52fbf1134d ("lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lkml.kernel.org/r/20251127130624.563597e3@canb.auug.org.au
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add NVIDIA Olympus MIDR to neoverse_spe range list.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add the part number and MIDR for NVIDIA Olympus.
Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
With sufficient tests running the load causes the top test fails with:
```
123: perf top tests : FAILED!
--- start ---
test child forked, pid 629856
Basic perf top test
Basic perf top test [Failed: no sample percentage found]
---- end(-1) ----
```
Mark the test exclusive to avoid flakes.
Fixes: 75e961730b ("perf tests top: Add basic perf top coverage test")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Ensure the perf.data output when checking permissions is written to
/dev/null so that it isn't left in the directory the test is run.
Fixes: b58261584d ("perf test kvm: Add some basic perf kvm test coverage")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The naneng-combphy driver already has DT property checks for
"rockchip,enable-ssc" and "rockchip,ext-refclk", use it for
the rk3528_combphy_cfg. Also aligned the indentation of the
rk3528_combphy_grfcfgs parameters (using tabs).
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250910122000.951100-1-amadeus@jmu.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Starting with Glymur, the PCIe and DP PHYs qserdes register offsets differ
for the same version number. So in order to be able to differentiate
between them, add these ones with DP prefix.
Add the necessary PHY setting tables for enabling the DP path within the
QMP subsystem. Introduced some new callbacks for v8 specific sequences,
such as for clock configurations based on the different link speeds.
Wesley Cheng added some updated settings from the hardware programming
guides on existing PHY tables and clock settings.
Co-developed-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-9-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For SuperSpeed USB to work properly, there is a set of HW settings that
need to be programmed into the USB blocks within the QMP PHY. Ensure that
these settings follow the latest settings mentioned in the HW programming
guide. The QMP USB PHY on Glymur is a USB43 based PHY that will have some
new ways to define certain registers, such as the replacement of TXA/RXA
and TXB/RXB register sets. This was replaced with the LALB register set.
There are also some PHY init updates to modify the PCS MISC register space.
Without these, the QMP PHY PLL locking fails.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-8-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
QMP combo phy V6 and above use the clamp register from the PCS always on
(AON) address space. Update the driver accordingly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-7-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Glymur contains a USB multiport controller which supports a QMP UNI PHY.
These ports do not have typeC capability, so it needs to be differentiated
in this manner. Update the QMP PHY sequence required to bring up the UNI
PHY for Glymur. The UNI PHY follows mostly the same register field
definitions as previous SoCs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-6-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce support for the SMB2370 based eUSB2 repeater. Configure the
proper repeater tuning settings, as if this is not done correctly, it
can lead to instability on the USB2 link, which leads to USB2
enumeration failures, or random disconnects.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-5-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the Glymur compatible to the M31 eUSB2 PHY, and use the SM8750 as
the fallback.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-3-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Glymur USB subsystem contains a multiport controller, which utilizes
two QMP UNI PHYs. Add the proper compatible string for the Glymur SoC, and
the required clkref clock name.
Signed-off-by: Wesley Cheng <wesley.cheng@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251209-linux-next-12825-v8-2-42133596bda0@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
dev_set_drvdata() is called twice, it is sufficient to do it only once.
devm_of_phy_provider_register() can fail, and if it does, the
&priv->cdr_check work item is queued, but not cancelled, and the device
probing failed, so it will trigger use after free. This is a minor risk
though.
Resource initialization should be done a little earlier, in case we need
to dereference dev_get_drvdata() in lynx_28g_pll_read_configuration() or
in lynx_28g_lane_read_configuration().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-16-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We have "dev" which holds &pdev->dev, but we still dereference this
pointer 4 more times, instead of using the local variable.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-15-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
While adding support for 25GbE, it was noticed that the RCCR0 and TTLCR0
registers have different values for this protocol than the 10GbE and
1GbE modes.
Expand the lynx_28g_proto_conf[] array with the expected values for the
currently supported protocols. These were dumped from a live system, and
are the out-of-reset values. It will ensure that the lane is configured
with these values when transitioning from 25GbE back into one of these
modes.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-14-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver does not handle well protocol switching to or from USXGMII,
because it conflates it with 10GBase-R.
In the expected USXGMII use case, that isn't a problem, because SerDes
protocol switching performed by the lynx-28g driver is not necessary,
because USXGMII natively supports multiple speeds, as opposed to SFP
modules using 1000Base-X or 10GBase-R which require switching between
the 2.
That being said, let's be explicit, and in case someone requests a
protocol change which involves USXGMII, let's do the right thing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-13-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Lynx 28G is a multi-protocol SerDes - it handles serial Ethernet, PCIe,
SATA.
The driver should not use the phylib-specific phy_interface_t as an
internal data representation, but something specific to its internal
capabilities, and only convert to phy_interface_t when PHY_MODE_ETHERNET
is selected and used.
Otherwise it has no way of representing the non-Ethernet lanes (which
was not a short-term goal when the driver was introduced, and is not a
goal per se right now either, but should nonetheless be possible).
Prefer the "enum lynx_lane_mode" name over "lynx_28g_lane_mode", in
preparation of future Lynx 10G SerDes support. This SerDes is part of
the same IP family and has similar capabilities, and will reuse some
code, hence the common data type.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-12-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current approach of transitioning from one SerDes protocol to
another in lynx_28g_set_lane_mode() is too poetic.
Because the driver only supports 1GbE and 10GbE, it only modifies those
registers which it knows are different between these two modes. However,
that is hardly extensible for 25GbE, 40GbE, backplane modes, etc.
We need something more systematic to make sure that all lane and
protocol converter registers are written to consistent values, no matter
what was the source lane mode.
For that, we need to introduce tables with register field values, for
each supported lane mode.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-11-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Eliminate the need to calculate a lane_offset manually, and generate
some macros which access the protocol converter corresponding to the
correct lane in the PCC* registers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-10-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver will need to become more careful with the values it writes to
the TX and RX equalization registers. As a preliminary step, convert the
magic numbers to macros defining the register field meanings.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-9-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reduce the number of bit field definitions required in this driver (in
the worst case, a read form and a write form), by defining just the
mask, and using the FIELD_GET() and FIELD_PREP() API from
<linux/bitfield.h> with that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-8-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The last step in having lynx_28g_lane_rmw() arguments that fully point
to their definitions is the removal of the current concatenation logic,
by which e.g. "LNaTGCR0, N_RATE_QUARTER, N_RATE_MSK" is expanded to
"LNaTGCR0, LNaTGCR0_N_RATE_QUARTER, LNaTGCR0_N_RATE_MSK".
There are pros and cons to the above. An advantage is the impossibility
to mix up fields of one register with fields of another. For example
both LNaTGCR0 and LNaRGCR0 contain an N_RATE_QUARTER field (one for the
lane RX direction, one for the lane TX).
But the two notable disadvantages are:
1. the impossibility to write expressions such as logical OR between
multiple fields. Practically, this forces us to perform more accesses
to hardware registers than would otherwise be needed. See the LNaGCR0
access for example.
2. the necessity to invent fields that don't exist, like SGMIIaCR1_SGPCS_DIS,
in order to clear SGMIIaCR1_SGPCS_EN (the real field name). This is
confusing, because sometimes, fields that end with _DIS really exist,
and it's best to not invent new field names.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-7-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, in macros such as lynx_28g_lane_rmw(), the driver has
macros which concatenate the LYNX_28G_ prefix with the "val" and "mask"
arguments. This is done to shorten function calls and not have to spell
out LYNX_28G_ everywhere.
But outside of lynx_28g_lane_rmw(), lynx_28g_lane_read() and
lynx_28g_pll_read(), this is not done, leading to an inconsistency in
the code.
Also, the concatenation itself has the disadvantage that searching the
arguments of these functions as full words (like N_RATE_QUARTER) leads
us nowhere, since the real macro definition is LNaTGCR0_N_RATE_QUARTER.
Some maintainers want register definitions in drivers to contain the
driver name as a prefix, but here, this has the disadvantages listed
above, so just remove that prefix.
The only change made here is the removal of LYNX_28G_.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, the bindings of this multi-lane SerDes are such that
consumers specify the lane index in the PHY cell, and the lane itself is
not described in the device tree.
It is desirable to describe individual Lynx 28G SerDes lanes in the
device tree, in order to be able to customize electrical properties such
as those in Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
(or others).
If each lane may have an OF node, it appears natural for consumers to
have their "phys" phandle point to that OF node.
The problem is that transitioning between one format and another is a
breaking change. The bindings of the 28G Lynx SerDes can themselves be
extended in a backward-compatible way, but the consumers cannot be
modified without breaking them.
Namely, if we have:
&mac {
phys = <&serdes1 0>;
};
we cannot update the device tree to:
&mac {
phys = <&serdes1_lane_0>;
};
because old kernels cannot resolve this phandle to a valid PHY.
The proposal here is to keep tolerating existing device trees, which are
not supposed to be changed, but modify lynx_28g_xlate() to also resolve
the new format with #phy-cells = <0> in the lanes.
This way we support 3 modes:
- Legacy device trees, no OF nodes for lanes
- New device trees, OF nodes for lanes and "phys" phandle points towards
them
- Hybrid device trees, OF nodes for lanes (to describe electrical
parameters), but "phys" phandle points towards the SerDes top-level
provider
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-4-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This simplifies the main control flow a little bit and makes the logic
reusable for probing the lanes with OF nodes if those exist.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-3-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Josua Mayer requested to have OF nodes for each lane, so that he
(and other board developers) can further describe electrical parameters
individually.
For this use case, we need a container node to apply the already
existing Documentation/devicetree/bindings/phy/transmit-amplitude.yaml,
plus whatever other schemas might get standardized for TX equalization
parameters, polarity inversion etc.
When lane OF nodes exist, these are also PHY providers ("phys" phandles
can point directly to them). Compare that to the existing binding, where
the PHY provider is the top-level SerDes node, and the second cell in
the "phys" phandle specifies the lane index.
The new binding format overlaps over the old one without interfering,
but there is a caveat:
Existing device trees, which already have "phys = <&serdes1 0>" cannot
be converted to "phys = <&serdes_1_lane_a>", because in doing so, we
would break compatibility with old kernels which don't understand how to
translate the latter phandle to a PHY.
The transition to the new phandle format can be performed only after a
reasonable amount of time has elapsed after this schema change and the
corresponding driver change have been backported to stable kernels.
However, the aforementioned transition is not strictly necessary, and
the "hybrid" description (where individual lanes have their own OF node,
but are not pointed to by the "phys" phandle) can remain for an
indefinite amount of time, even if a little inelegant.
For newly introduced device trees, where there are no compatibility
concerns with old kernels to speak of, it is strongly recommended to use
the "phys = <&serdes_1_lane_a>" format. The same holds for phandles
towards lanes of LX2160A SerDes #3, which at the time of writing is not
yet described in fsl-lx2160a.dtsi, so there is no legacy to maintain.
To avoid the strange situation where we have a "phy" (SerDes node) ->
"phy" (lane node) hierarchy, let's rename the expected name of the
top-level node to "serdes", and update the example too. This has a
theoretical chance of causing regressions if bootloaders search for
hardcoded paths rather than using aliases, but to the best of my
knowledge, for LX2160A/LX2162A this is not the case.
Link: https://lore.kernel.org/lkml/02270f62-9334-400c-b7b9-7e6a44dbbfc9@solid-run.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251125114847.804961-2-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update phy driver to enable SS combo phy for this SoC. New registers'
definitions, phy ops (init/exit), and dedicated phy driver data
structure are added for SS combo phy. Add these changes in the driver
to support SS combo phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-7-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USBDRD31 5nm controller consists of Synopsys USB20 femptoPhy and
USB31 SSP+ combophy. Document support for the USB31 SSP+ phy found on
combophy of the ExynosAutov920 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-6-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Support UTMI+ combo phy for this SoC, which is somewhat similar to
what the existing Exynos850 supports. The difference is that some
register offsets and bit fields are different from Exynos850.
Add required change in phy driver to support combo HS phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-5-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USBDRD31 5nm controller consists of Synopsys USB2.0 femptophy and
USBSS combophy. Add-on USB20 femptophy is required to support USB20 data
rates along with USBSS phy. Document support for the USB2.0 femptophy
found on combophy of the this SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-4-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enable UTMI+ phy support for this SoC which is very similar to what
the existing Exynos850 supports.
Add required change in phy driver to support HS phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-3-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document support for the USB20 phy found on the ExynosAutov920 SoC. The
USB20 phy is functionally identical to that on the Exynos850 SoC, so no
driver changes are needed to support this phy. However, add a dedicated
compatible string for USB20 phy found in this SoC.
This phy needs 0.75v, 0.18v and 3.3v supplies for its internal
functionally. Power Supply's names are as per phy's User Data-Book.
These names, (dvdd, vdd18 and vdd33), are considered for 0.75v, 1.8v
and 3.3v respectively.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-2-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Apple Type-C PHY (ATCPHY) is a PHY for USB 2.0, USB 3.x,
USB4/Thunderbolt, and DisplayPort connectivity found in Apple Silicon SoCs.
The PHY handles muxing between these different protocols and also provides
the reset controller for the attached dwc3 USB controller.
There is no documentation available for this PHY and the entire sequence
of MMIO pokes has been figured out by tracing all MMIO access of Apple's
driver under a thin hypervisor and correlating the register reads/writes
to their kernel's debug output to find their names. Deviations from this
sequence generally results in the port not working or, especially when
the mode is switched to USB4 or Thunderbolt, to some watchdog resetting
the entire SoC.
This initial commit already introduces support for Display Port and
USB4/Thunderbolt but the drivers for these are not ready. We cannot
control the alternate mode negotiation and are stuck with whatever Apple's
firmware decides such that any DisplayPort or USB4/Thunderbolt device will
result in a correctly setup PHY but not be usable until the other drivers
are upstreamed as well.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Co-developed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # for reset controller
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-3-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Apple's Type-C PHY (ATCPHY) is a PHY for USB 2.0, USB 3.x,
USB4/Thunderbolt, and DisplayPort connectivity found in Apple Silicon
SoCs.
The PHY handles muxing between these different protocols and also provides
the reset controller for the attached dwc3 USB controller.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-2-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Various hardware, like the Type-C PHY or the Thunderbolt/USB4 NHI,
present on Apple SoCs need machine-specific tunables passed from our
bootloader m1n1 to the device tree. Add generic helpers so that we
don't have to duplicate this across multiple drivers.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-1-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
