The PDP Marvel Xbox 360 controller with USB ID 0e6f:0147 is
incorrectly classified as an Xbox One controller.
With the current XTYPE_XBOXONE classification, the controller is
detected but produces no input, while its four player LEDs continue
blinking indefinitely.
Classify USB ID 0e6f:0147 as an Xbox 360 controller instead.
Tested on a PDP Marvel Xbox 360 controller with USB ID 0e6f:0147.
All inputs register correctly and the player LED indicates the
current player.
Fixes: c225370e01 ("Input: xpad - sync supported devices with 360Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Nyberg <SlickStretch3.0@gmail.com>
Link: https://patch.msgid.link/20260910071627.236014-1-SlickStretch3.0@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a comment to input-event-codes.h clarifying that no new LED
definitions should be added to the input subsystem. The existing
LED_* definitions are legacy and grandfathered for backwards
compatibility with userspace via evdev. Any new LED indicators
should instead use the dedicated LED subsystem.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On the MS Surface Pro 11 soc_button_array probing races with the GPIO
driver probing. If soc_button_array wins the race then gpiod_get() returns
EPROBE_DEFER, which should normally take care of retrying later, but
the soc_button_array code deliberately ignores EPROBE_DEFER causing it
to fail its probe() which causes the volume and power buttons to now work.
The ignoring of EPROBE_DEFER is there to deal with a problem specific to
older Bay Trail (BYT) and Cherry Trail (CHT) tablets which often use this
driver. Modify the error handling to only ignore EPROBE_DEFER on BYT and
CHT platforms and propagate EPROBE_DEFER normally on other platforms.
Fixes: bcf0595789 ("Input: soc_button_array - partial revert of support for newer surface devices")
Cc: stable@vger.kernel.org
Reported-by: Sergey Lebedev <lsa.uz@pm.me>
Closes: https://lore.kernel.org/lkml/20260830141355.55898-1-lsa.uz@pm.me/
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Tested-by: Sergey Lebedev <lsa.uz@pm.me>
Link: https://patch.msgid.link/20260909093934.29411-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The description of commit bfb34eced5 ("mtd: rawnand: qcom: avoid writing
to obsolete register") says this:
"QPIC_EBI2_ECC_BUF_CFG register got obsolete from QPIC V2.0 onwards.
Avoid writing this register if QPIC version is V2.0 or newer."
Although the referenced commit is related to the 'qcom-nandc' driver,
however the hardware supported by the current driver is also based on
QPIC v2.0 so we should avoid writing that register here as well.
Remove the register writing code to avoid undefined behaviour.
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260909-qpic-snand-avoid-ebi2-reg-write-v1-1-9b1b1466cc75@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DMI entry for Huawei Matebook B3-420 (BDZ-WXX9) with HEADPHONE_GPIO
and HEADSET_MIC1 quirks.
Similar to Huawei Matebook D (BOD-WXX9).
On the same machine,audio routing between speakers and headphones works
correctly when running Windows with the Huawei audio driver.
However, after reinstalling Linux, both the speakers and headphones output
sound simultaneously,indicating that the amplifier enable GPIOs are not
being toggled correctly to separate the two outputs.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://patch.msgid.link/20260911081932.2605407-1-aichao@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Fitzgerald <rf@opensource.cirrus.com> says:
Struct snd_soc_dai_link_ch_map had a single mask member to set the
CPU channel masks. But no fixup was done to the codec end of the link.
For example if a 4-channel CPU capture DAI was made from two codecs both
supplying 2 channels, the hw_params() of the codec would be passed a
channel count of 4.
On SoundWire this could cause multiple codecs to send data in the same
bits of a frame because the unused channels were not disabled.
The changes in this series are:
- Separate channel masks for CPU and codec in struct
snd_soc_dai_link_ch_map .
- Apply the codec channel mask as a channel count fixup if the machine
drive has not set a TDM mask.
- Set the codec channel mask in the SoundWire machine driver.
- Remove the workaround from the cs_amp machine driver.
Link: https://patch.msgid.link/20260910114500.1586637-1-rf@opensource.cirrus.com
Delete the asoc_sdw_cs_spk_feedback_rtd_init(). This is not needed now
that the ASoC bug it was working around has been fixed. And it was broken
anyway because it didn't match the way the core SoundWire code mapped
codec channels to frame bitslots.
This code was added to avoid a problem where multiple codec DP outputs
were mapped to the same SoundWire frame bit slot. This would allow a
user to break the SoundWire bus just by enabling mixer outputs using
ALSA controls.
As no production system has used the capture stream, this workaround
was of little consequence and the problem of conflicting DP mappings
was not investigated.
The ASoC bug that enabled too many channels on each codec has now been
fixed. So this workaround can be completely deleted.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910114500.1586637-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In asoc_sdw_hw_params() set the codec_ch_mask member of struct
snd_soc_dai_link_ch_map for capture streams. ASoC will then pass the
correct number of channels to each codec hw_params(). This prevents
trying to enable more channels on the codec DP than have been allocated
bitslots in the SoundWire frame, which would cause bus clash errors.
In theory codec_ch_mask could also be set for playback streams, but for
those the CPU is the only sender so there is no risk of bus clash.
For playback streams codec_ch_mask is set to 0 to preserve the existing
behavior and avoid introducing bugs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910114500.1586637-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In __soc_pcm_hw_params() if there is a snd_soc_dai_link_ch_map with
non-zero codec_ch_mask, use that channel mask to restrict which channels
are enabled on the codec. But only if there isn't a TDM mask.
It is possible that a snd_soc_dai_link_ch_map could include the same codec
multiple times on different CPUs so the for_each_rtd_ch_maps() loop
accumulates the channel masks for all entries of that codec.
If a TDM mask was also set, it takes priority and is used instead of any
possible snd_soc_dai_link_ch_map entries. (They cannot be ANDed together
because the bit positions are indicating different things: TDM is a bit
for each TDM slot, codec_ch_mask is a bit for each codec channel.)
This fixes a problem of incorrect TX channels enabled on the codec when
multiple codecs are aggregated on a single capture link. For example:
- Two CPUs with six 4-channel codecs.
- The machine driver chooses to assign one channel from each codec to
one channel on the CPU
- But the codec hw_params() would be passed a channel count of 6, which
(a) is more channels than the codec has and (b) allows enabling channels
that should not be driving the audio bus.
Fixes: ac950278b0 ("ASoC: add N cpus to M codecs dai link support")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910114500.1586637-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a codec_ch_mask member to snd_soc_dai_link_ch_map.
The CPU and codec channel masks are not necessarily the same, and are
quite likely different. SoundWire and I2S/TDM both support assigning
different sample slots to each codec, so for example channel 0 on each
codec could map to different channels at the CPU.
It is also possible for one TX channel to map to multiple RX channels.
So it isn't _always_ safe to assume that the total number of set bits
in the CPU ch_mask is the same as the total number of enabled channels
on the codec.
For example consider this mapping on a capture stream:
CPU0 CODEC0 cpu_ch_mask = 0x03
CPU1 CODEC0 cpu_ch_mask = 0x03
This could be either four TX channels on the codec split across two
receiving CPUs, or two TX channels on the codec duplicated to two CPUs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910114500.1586637-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the ch_mask member of snd_soc_dai_link_ch_map to cpu_ch_mask,
as that is what it is used for.
The CPU and codec channel masks are not necessarily the same, and are
quite likely different. SoundWire and I2S/TDM both support assigning
different sample slots to each codec, so for example channel 0 on each
codec could map to different channels at the CPU. So it's quite normal
that the channel mask at the CPU end is different for each codec, but
the codec channel masks are the same for each codec.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910114500.1586637-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pll2 reconfiguration sequence in order to fix calibration
time-out issue and to support 24.576MHz MCLK on specific platforms.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/20260909085449.862350-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In wm_adsp_request_firmware_file() only log the "Failed to request
FILENAME" message when there is a real error (not when the file is
missing). Add a new debug message to log the sequence of filenames tried
during the file search.
People have enabled debug messages, seen the "Failed to request" messages
that are only logging the normal file search sequence, and reported them
as errors.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260910121047.1592541-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the Acer Aspire Go 15 (AG15-42P), the internal keyboard drops out
~5 seconds after boot on both Linux and Linux-LTS kernels. Keystrokes on
the built-in keyboard stop registering while the trackpad and external
keyboards remain functional.
Testing confirms that booting with the i8042.reset kernel parameter
resolves the issue and keeps the internal keyboard responsive.
Add SERIO_QUIRK_RESET_ALWAYS to i8042_dmi_quirk_table for the Acer
Aspire AG15-42P to automatically apply this quirk on boot.
Signed-off-by: Chris Sommers <chris.sommers@icloud.com>
Link: https://patch.msgid.link/20260907182723.2709981-1-chris.sommers@icloud.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Lenovo ThinkPad T440p (PNP ID LEN0036, board id 2722) has a
Synaptics touchpad whose SMBus companion is not ready at boot and
takes roughly 200 seconds to appear. During this window the touchpad
and TrackPoint are completely unresponsive on approximately 50% of
boots, making the machine unusable until the companion finally
registers.
The device is in the topbuttonpad_pnp_ids[] SMBus allowlist, so the
kernel attempts to use SMBus/RMI4 mode by default. When the companion
is not ready, psmouse_smbus_init() leaves breadcrumbs and returns
-EAGAIN, the PS/2 fallback path is taken, but the device does not
function properly until the companion appears and RMI4 takes over.
Disable SMBus InterTouch for board id 2722 so the touchpad and
TrackPoint work immediately via PS/2 from boot. Users can still force
SMBus with psmouse.synaptics_intertouch=1 if needed.
Tested-by: Raphaël Larocque <rlarocque@disroot.org>
Signed-off-by: Raphaël Larocque <rlarocque@disroot.org>
Link: https://patch.msgid.link/20260910164425.12832-1-rlarocque@disroot.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In two places, current code forces vmbus_connection.conn_state to
DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect()
calls vmbus_initiate_unload(), which unloads the VMBus connection
only if the conn_state is CONNECTED. Consequently, the connection
remains and the Hyper-V host might continue to send messages or post
VMBus interrupts.
The problem was introduced in commit 74347a99e7 ("x86/Hyper-V:
Unload vmbus channel in hv panic callback"), in that
vmbus_initiate_unload() started checking the current connection
state before doing the unload. This commit removed some occurrences
where conn_state was forced to DISCONNECTED, but these two remained,
apparently due to an oversight at the time.
Fix this by not forcing conn_state to DISCONNECTED during VMBus exit,
or if a failure occurs when establishing the connection in the first
place. Whatever value conn_state has at the time is then read by
vmbus_initiate_unload() to determine if there is a connection to
be unloaded.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-hyperv/20260805205806.B5AC31F000E9@smtp.kernel.org/
Fixes: 74347a99e7 ("x86/Hyper-V: Unload vmbus channel in hv panic callback")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
hv_apicid_to_vp_index() currently uses the per-cpu hypercall input
and output pages. This function is called when running in VTL2 and
when running in an SEV-SNP CoCo VM with no paravisor. In the former
case, the output page is allocated, but in the latter case it is
not, so the hypervisor stores the output VP index in memory that has
not been allocated by the guest.
Fix this by using the input page for both input and output. The
hypercall has very small input and output, so sharing the same
page for both is straightforward. An alternative fix is to
allocate the per-cpu output page when running in an SEV-SNP CoCo
guest, but this uses significantly more memory, particularly
with larger vCPUs counts.
Fixes: 86c48271e0 ("x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The removal of stimer message mode in commit be0cfab740 ("clocksource:
hyper-v: Remove support for stimer interrupts in message mode") left a
few comments out of date. hv_stimer_setup_percpu_clockev() picked up two
typos ("afters", "to allows"), and the hv_synic_suspend() comment still
references the deleted hv_stimer_legacy_cleanup(), the legacy non-Direct
Mode configuration, and clockevents_unbind_device(), which is no longer
on the cleanup path.
Update the typos and rewrite the hv_synic_suspend() comment to describe
the current Direct Mode path: non-boot CPU stimers are cleaned up via
the cpuhp teardown callback hv_stimer_cleanup(), and CPU0's stimer is
left alone because it is harmless (interrupts stay disabled across the
suspend/resume window) and is shut down later by the timekeeping code.
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
There is a retry loop in init_vp_index() where the CPUs from a certain
node are stripped out if they have already been in the allocated cpumask
or not in HK_TYPE_MANAGED_IRQ housekeeping cpumask. If there is no
CPU left, the allocated cpumask is ignored and the process is retried
again. However, if the HK_TYPE_MANAGED_IRQ housekeeping cpumask turns
out not to contain any CPU in that particular node, that will become an
infinite retry loop. This particular problem was reported by sashiko
[1]. This should rarely happen, but we still need to guard against this.
Fix this infinite loop problem by also skipping NUMA node that has no
housekeeping CPU in the inner while loop of init_vp_index(). Also update
the early abort check to check for the absence of online housekeeping
CPUs instead of just the emptiness of the cpumask. As the outer for
loop will only be reached if the housekeeping cpumask has at least one
online CPU, a NUMA node with housekeeping CPUs will eventually be found.
Link: https://sashiko.dev/#/message/20260422030903.E1BFCC2BCB0%40smtp.kernel.org [1]
Fixes: 6640b5df1a ("Drivers: hv: vmbus: Don't assign VMbus channel interrupts to isolated CPUs")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michael Kelley <mhkelley@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
dpu_hw_ctl_clear_pending_flush() resets the cached per-block state after a
flush transaction, but misses pending_periph_flush_mask.
The peripheral flush updater accumulates interface bits in this mask. A
later transaction which sets the top-level peripheral flush bit can write
stale interface bits to CTL_PERIPH_FLUSH together with the current state.
Peripheral flush support was added after the helper started clearing every
individual pending flush mask. Clear the peripheral mask together with the
other cached child masks.
Fixes: 64f7b81f03 ("drm/msm/dpu: add support of new peripheral flush mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Saim Shujah <saimzst@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/748968/
Link: https://lore.kernel.org/r/20260828065440.140410-1-saimzst@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
msm_dp_display_mode_valid() halves the pixel clock when either YUV420 or
wide bus is in use, then uses that halved value both for the controller
pixel clock limit and for the DP link bandwidth check.
Only YUV420 halves the data crossing the link. Wide bus widens the
internal DPU to DP interface to two pixels per clock, halving the
controller clock. Every pixel is still transmitted, so the link
bandwidth requirement remains.
As a result, modes needing up to twice the available link bandwidth pass
validation. On the IMDT QCS8550 SBC (rev5 with CYPD6125), where DP runs
over USB-C alt mode where only two lanes are available, 3840x2160@60 was
accepted despite needing 9.6 Gbps against the 8.64 Gbps the link can
carry.
Use a separate link pixel clock that is only halved for YUV420 for the
bandwidth calculation, leaving the wide bus halving to apply solely to
the controller pixel clock limit. With this, 4k@60 is correctly rejected
and 4k@30 selected instead.
Fixes: df9cf852ca ("drm/msm/dp: account for widebus and yuv420 during mode validation")
Assisted-by: Claude:claude-opus-5
Signed-off-by: William Bright <william.bright@imd-tec.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/746145/
Link: https://lore.kernel.org/r/20260812-msm-dp-link-bw-v1-1-b0e3ce1190be@imd-tec.com
[DB: dropped useless comment]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
adreno_gpu_init() calls pm_runtime_use_autosuspend(), but
adreno_gpu_cleanup() does not call the matching
pm_runtime_dont_use_autosuspend() during teardown.
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to
adreno_gpu_cleanup().
This issue was found by manual code inspection.
Fixes: eeb754746b ("drm/msm/gpu: use pm-runtime")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/745110/
Link: https://lore.kernel.org/r/20260808131624.2854412-1-lgs201920130244@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
msm_dp_display_atomic_enable() returns early when link training fails,
leaving ->power_on false and the main link down.
msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE
and waits for an idle-pattern completion that cannot arrive, so every failed
enable is followed by "PUSH_IDLE pattern timedout".
Every other step of the teardown is already gated on that flag:
msm_dp_display_disable(), called from .atomic_post_disable(), returns early
on !power_on. The PUSH_IDLE write is the only one that is not, so the
controller's runtime-PM reference is then dropped without the link having
been taken down.
On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC
does not survive it: TrustZone force-stops the SOCCP and ADSP remote
processors and the machine resets silently about 50 ms later, with no oops
and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not
currently train, this reproduces without any compositor or GPU involvement:
# eDP enable has already failed with "Failed link training (rc=-104)"
echo 1 > /sys/class/graphics/fb0/blank
[535.645455] === marker ===
[535.694833] qcom_q6v5_pas d00000.remoteproc: fatal error received: \
sys_m_smsm.c:512:TZ force stop
[535.694875] remoteproc remoteproc0: crash detected in soccp: type fatal error
[535.728857] qcom_q6v5_pas 6800000.remoteproc: fatal error received: \
sys_m_smsm.c:783:err fatal notification received from TZ
<SoC reset>
Gate the PUSH_IDLE write on ->power_on so the disable path is consistent
with the rest of the teardown. With this applied the same sequence is
harmless and the machine stays up; without it, it resets every time.
The unconditional write dates back to the original DP driver
(c943b4948b ("drm/msm/dp: add displayPort driver support")), but the
surrounding code has been restructured several times since, so no Fixes:
tag is offered.
Note that the eDP link-training failure that exposes this on the A16 is a
separate problem in the glymur eDP PHY and is reported separately; this
change is about not damaging the machine when training fails, for whatever
reason.
Tested on ASUS Zenbook A16 (UX3607OA), Snapdragon X2 Elite Extreme, on
linux-next next-20260803 and next-20260807. The machine has since been
running next-20260807 with this patch as its daily driver.
Assisted-by: Anthropic:Claude-Opus-5
Signed-off-by: Jesse Casco <jesse.casco@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/745167/
Link: https://lore.kernel.org/r/20260808171325.133041-1-jesse.casco@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
msm_fbdev_driver_fbdev_probe() points screen_buffer at a kernel virtual
mapping of the GEM object and uses the deferred sysmem fb ops, but never
sets FBINFO_VIRTFB. The framebuffer core then assumes the memory is not
in the virtual address space and warns on the first console draw:
fb0: sys_fillrect: framebuffer is not in virtual address space.
The drm_fbdev_dma, drm_fbdev_shmem and drm_fbdev_ttm helpers all set the
flag for system memory. Do the same here.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Assisted-by: Claude:claude-opus-5
Patchwork: https://patchwork.freedesktop.org/patch/743293/
Link: https://lore.kernel.org/r/20260730-drm-msm-fbinfo-virt-v1-1-a27099a6dc58@oss.qualcomm.com
Acked-by: Rob Clark <robin.clark@oss.qualcomm.com> # on IRC
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
- Don't destroy user event fields when removal fails
User event fields are destroyed before the event is removed from
visibility. But that can fail leaving the still visible event with no
fields. Move the destroying of the fields to after the event is
successfully removed from visibility.
- Initialize function graph state is fork before calling copy_exec_state()
For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state.
If that allocation fails, ftrace_graph_exit_task() will free the tasks
ret_stack pointer. Since that pointer is still using the parent's
ret_stack, it mistakenly frees the parent's pointer too.
Call ftrace_graph_init() on the task first which will NULL out the new
tasks's ret_stack and if the copy fails, it will not free anything.
- Remove FGRAPH_MAX_INDEX
The macro FGRAPH_MAX_INDEX was added but never used. Remove it.
- Save ent_size in function graph printing of nested functions
The function graph tracer needs to look at the next event to see if the
next event is the return of the current function entry. If it is, it
prints a single line:
ktime_get();
Otherwise it prints it like a nested function:
tick_nohz_irq_exit() {
ktime_get();
kcpustat_irq_exit();
}
In order to look at the next event, it must save the current event so that
it has the information to print from it. It saves the event in the
iterator descriptor called "ent". What it doesn't save is the ent_size of
the event which is now used to know if the function graph arguments are to
be printed. The peek doesn't save the size so the size used happens to be
that of the size of the last event that was seen.
Save the entry event size in the iterator descriptor so that the correct
size is used.
- Fix several errors with freeing data in the histogram code
The histogram code had a lot of leaked or or incorrect accounting when
failures happen. Correct them.
- Fix histogram regression of .percent and .graph modifiers
Up until 6.3 histogram values could have "percent" or "graph" modifiers
that changed how they were printed. But a change that added restricting
histograms values from being strings, stack traces and other modifiers
inadvertently prevented them from using the percent and graph modifiers,
which were legal use cases for values.
Put back the percent and graph modifiers.
- Fix various typos in the comments
- Set the trace_clock before initializing a histogram with clock argument
The histogram API allows the user to specific which trace clock to use via
a "clock=" string. The histogram is set up first before the clock is
checked. If the passed in clock is not valid, it exits without fully
fixing up the histogram leaving it on the list and a use-after-free can
trigger.
Update the clock argument first and if it fails then exit gracefully
before the histogram trigger is placed on any lists.
- Restore :mod: trailer after parsing in ftrace_set_clr_event
The function ftrace_set_clr_event() modifies the parse string and needs to
put it back to what was passed in. It searches for ":mod:" via a strsep()
but fails to put back the first ':' in the string.
Add back the ':' in the passed in string.
- Take trace_array reference when opening a tracer options file
The options files are dynamically created and some tracers add their own
options. When a tracer adds their own list of options, the trace_array
holding them has an array to hold the list of options for each tracer.
This array increases in size via a krealloc(), and the new entry gets a
newly allocated array to hold the options of the new tracer being added.
The element in each entry of the tracer's option array holds a pointer
back to the trace_array, a pointer to the tracer it is associated to, a
pointer to the flags of the option.
The issue is that these arrays are freed when the trace_array is freed
when its instance it represents is removed from the instances directory.
There's a race that an open of one of these options files can happen when
the instance is being removed.
Add a new helper function to be called by the open function of the options
file to iterate all existing trace_arrays under a lock and find the one
that has the given option element in one of it's tracer arrays. If found,
then update the associated trace_array's reference counter to keep it from
being freed. If not found, have the open call return -ENODEV.
- Disable interrupts when acquiring the lock in rb_wake_up_waiters()
The function rb_wake_up_waiters() assumes it will be called in interrupt
context and does not disable irqs when taking cpu_buffer->reader_lock,
which can be called in hard interrupt context. The issue is in PREEMPT_RT,
this function is called in thread context leaving this lock open to a
deadlock.
Take the lock with interrupts disabled.
- Use rcu_assign_pointer() for tmp_ops filter hash
The tmp_ops used in update_ftrace_direct_mod() assigns its filter_hash
field directly, but that field is annotated as __rcu and sparse complains.
Assign it with rcu_assign_pointer()
- Fix use-after-free in enable_trigger_private_data_free()
The trace_event_call is accessed through the event_trigger_data's
trace_event_file pointer to put the trace_event_call on freeing. The issue
is that the trace_event_file data may have been freed already causing a
use-after-free. Add a field to the event_trigger_data that points directly
to the trace_event_call so that it can decrement its reference directly
without needing to go through the trace_event_file.
- Fix accounting of buffer data remote headers
trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount the
number of pages is needed for the asked for size as it doesn't take into
account the meta data on each page. Add a helper function to do the
calculation properly and use that in these functions.
- Catch nr_page_va overflow in ring_buffer_desc sizing
The number of pages per remote ring buffer is capped by
ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
overflow that field would silently allocate a descriptor smaller than what
was asked for.
- Do not resize the subbuf order if any per_cpu buffer is disabled
The mmapping of ring buffers disables resizing the subbuffers, but it is
done per-cpu whereas the subbuf size change is done for all the per_cpu
buffers under the buffer->mutex. It could change the size of some while
the mapping is happening on others. Have the resize of the subbuf order
check all the per_cpu buffers under the lock to see if any of them is
disabled before starting and causing an inconsistency between buffers that
are being mapped.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaqbdrBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qro9AQDF/j3VW3Uu98lVFI9AB10XYhLDd5nt
Zpf+3RviNgFpxgEAiE2+4K+4sM2SfaDDh9JMww9MKg1exL+cemE3a+JbBgY=
=jgYE
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Don't destroy user event fields when removal fails
User event fields are destroyed before the event is removed from
visibility. But that can fail leaving the still visible event with no
fields. Move the destroying of the fields to after the event is
successfully removed from visibility.
- Initialize function graph state is fork before calling
copy_exec_state()
For non-CLONE_VM forks, copy_exec_state() allocates a new
task_exec_state. If that allocation fails, ftrace_graph_exit_task()
will free the tasks ret_stack pointer. Since that pointer is still
using the parent's ret_stack, it mistakenly frees the parent's
pointer too.
Call ftrace_graph_init() on the task first which will NULL out the
new tasks's ret_stack and if the copy fails, it will not free
anything.
- Remove FGRAPH_MAX_INDEX
The macro FGRAPH_MAX_INDEX was added but never used. Remove it.
- Save ent_size in function graph printing of nested functions
The function graph tracer needs to look at the next event to see if
the next event is the return of the current function entry. If it is,
it prints a single line:
ktime_get();
Otherwise it prints it like a nested function:
tick_nohz_irq_exit() {
ktime_get();
kcpustat_irq_exit();
}
In order to look at the next event, it must save the current event so
that it has the information to print from it. It saves the event in
the iterator descriptor called "ent". What it doesn't save is the
ent_size of the event which is now used to know if the function graph
arguments are to be printed. The peek doesn't save the size so the
size used happens to be that of the size of the last event that was
seen.
Save the entry event size in the iterator descriptor so that the
correct size is used.
- Fix several errors with freeing data in the histogram code
The histogram code had a lot of leaked or or incorrect accounting
when failures happen. Correct them.
- Fix histogram regression of .percent and .graph modifiers
Up until 6.3 histogram values could have "percent" or "graph"
modifiers that changed how they were printed. But a change that added
restricting histograms values from being strings, stack traces and
other modifiers inadvertently prevented them from using the percent
and graph modifiers, which were legal use cases for values.
Put back the percent and graph modifiers.
- Fix various typos in the comments
- Set the trace_clock before initializing a histogram with clock
argument
The histogram API allows the user to specific which trace clock to
use via a "clock=" string. The histogram is set up first before the
clock is checked. If the passed in clock is not valid, it exits
without fully fixing up the histogram leaving it on the list and a
use-after-free can trigger.
Update the clock argument first and if it fails then exit gracefully
before the histogram trigger is placed on any lists.
- Restore :mod: trailer after parsing in ftrace_set_clr_event
The function ftrace_set_clr_event() modifies the parse string and
needs to put it back to what was passed in. It searches for ":mod:"
via a strsep() but fails to put back the first ':' in the string.
Add back the ':' in the passed in string.
- Take trace_array reference when opening a tracer options file
The options files are dynamically created and some tracers add their
own options. When a tracer adds their own list of options, the
trace_array holding them has an array to hold the list of options for
each tracer. This array increases in size via a krealloc(), and the
new entry gets a newly allocated array to hold the options of the new
tracer being added.
The element in each entry of the tracer's option array holds a
pointer back to the trace_array, a pointer to the tracer it is
associated to, a pointer to the flags of the option.
The issue is that these arrays are freed when the trace_array is
freed when its instance it represents is removed from the instances
directory. There's a race that an open of one of these options files
can happen when the instance is being removed.
Add a new helper function to be called by the open function of the
options file to iterate all existing trace_arrays under a lock and
find the one that has the given option element in one of it's tracer
arrays. If found, then update the associated trace_array's reference
counter to keep it from being freed. If not found, have the open call
return -ENODEV.
- Disable interrupts when acquiring the lock in rb_wake_up_waiters()
The function rb_wake_up_waiters() assumes it will be called in
interrupt context and does not disable irqs when taking
cpu_buffer->reader_lock, which can be called in hard interrupt
context. The issue is in PREEMPT_RT, this function is called in
thread context leaving this lock open to a deadlock.
Take the lock with interrupts disabled.
- Use rcu_assign_pointer() for tmp_ops filter hash
The tmp_ops used in update_ftrace_direct_mod() assigns its
filter_hash field directly, but that field is annotated as __rcu and
sparse complains. Assign it with rcu_assign_pointer()
- Fix use-after-free in enable_trigger_private_data_free()
The trace_event_call is accessed through the event_trigger_data's
trace_event_file pointer to put the trace_event_call on freeing. The
issue is that the trace_event_file data may have been freed already
causing a use-after-free. Add a field to the event_trigger_data that
points directly to the trace_event_call so that it can decrement its
reference directly without needing to go through the
trace_event_file.
- Fix accounting of buffer data remote headers
trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
the number of pages is needed for the asked for size as it doesn't
take into account the meta data on each page. Add a helper function
to do the calculation properly and use that in these functions.
- Catch nr_page_va overflow in ring_buffer_desc sizing
The number of pages per remote ring buffer is capped by
ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
overflow that field would silently allocate a descriptor smaller than
what was asked for.
- Do not resize the subbuf order if any per_cpu buffer is disabled
The mmapping of ring buffers disables resizing the subbuffers, but it
is done per-cpu whereas the subbuf size change is done for all the
per_cpu buffers under the buffer->mutex. It could change the size of
some while the mapping is happening on others. Have the resize of the
subbuf order check all the per_cpu buffers under the lock to see if
any of them is disabled before starting and causing an inconsistency
between buffers that are being mapped.
* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
ring-buffer: Check resize_disabled before publishing the new subbuf order
tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
tracing/remotes: Account for ring buffer page header in size calculation
tracing: Don't dereference trace_event_file in deferred trigger free
ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
tracing: Take trace_array reference when opening a tracer options file
tracing: Fix ring_buffer_read_page_size() kernel-doc
tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
tracing: Fix memory corruption from a "STACKTRACE" histogram key
tracing: Fix memory corruption from the histogram stacktrace modifier
tracing: Undo the registration when enabling the histogram trigger fails
tracing: Take the reference before publishing the named histogram trigger
tracing: Set the trace clock before registering the histogram trigger
tracing: Fix typo "preceeded" in comment
tracing: Fix typo "availabe" in comment
tracing: Let histogram values keep the percent and graph modifiers
tracing: Keep the entry count when the histogram stats allocation fails
tracing: Free histogram the field rejected for a bad modifier
tracing: Free histogram the var ref when its initialization fails
...
When an RDMA connection is successfully established via
smbd_get_connection() but cifs_get_tcp_session() later fails (e.g.
kthread_create() returns an error), the error path frees tcp_ses
without first destroying the smbd_connection.
Fix this by calling smbd_destroy() in the out_err cleanup path before
kfree(tcp_ses). smbd_destroy() safely handles the case where
smbd_conn is NULL, so it can be called unconditionally.
Closes: https://sashiko.dev/#/patchset/20260912165503.521597-1-pc%40manguebit.org
Fixes: 2f8946464b ("CIFS: SMBD: Upper layer connects to SMBDirect session")
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Cc: Tom Talpey <tom@talpey.com>
Cc: Stefan Metzmacher <metze@samba.org>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next
and ->prev to NULL instead of pointing to itself, making list_empty()
always return false and list_add() dereference a NULL ->prev pointer.
Also, cifs_signal_cifsd_for_reconnect() can be called concurrently
from multiple cifsd threads, allowing the same server's rlist node to
be added twice into the local list, corrupting it.
Closes: https://sashiko.dev/#/patchset/20260911204446.1719356-1-pc%40manguebit.org
Fixes: df0e03a4fb94 ("smb: client: fix potential deadlock when reconnecting channels")
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
clean_demultiplex_info() cancels server->echo delayed work but not
server->reconnect, which can cause a use-after-free when the
demultiplex thread exits while a reconnect work is still queued:
cifs_demultiplex_thread()
cifs_readv_from_socket()
cifs_reconnect()
__cifs_reconnect()
cifs_queue_server_reconn()
mod_delayed_work(cifsiod_wq, &server->reconnect, 0)
clean_demultiplex_info()
cancel_delayed_work_sync(&server->echo) // echo canceled
// reconnect NOT canceled
kfree_sensitive(server) // server freed
...later, on cifsiod_wq:
smb2_reconnect_server()
server->srv_count // UAF read of freed server
Fix this by canceling server->reconnect delayed work in
clean_demultiplex_info() before the server is freed, the same way
cifs_put_tcp_session() already does.
Reported-by: syzbot+5003556314abc915a71f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6aa4a12d.f81106d8.2ab401.0023.GAE@google.com
Fixes: 53e0e11efe ("CIFS: Fix a possible memory corruption during reconnect")
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Thorsten continues to track regressions, and reporting on known issues
with fixes that don't seem to make any progress.
I'm going to do an rc3 release later today - let's not keep these known
issues pending for yet another rc for no obvious reason.
Reported-by: Thorsten Leemhuis <regressions@leemhuis.info>
Link: https://lore.kernel.org/all/46403cf8-9a81-4596-87eb-dde58ae4c5db@leemhuis.info/
* regressions:
media: ipu-bridge: do not use the CVS device lookup for IVSC
wifi: mt76: mt792x: fix NULL dereference in ACPI SAR init during probe
wifi: mt76: mt7921: skip unknown CLC firmware records
Since commit c6b1b34b50 ("media: pci: intel: Add CVS support for IPU
bridge driver") the internal camera no longer works on laptops where the
sensor sits behind an IVSC, for example a Dell XPS 16 9640 (IPU6,
INTC10CF, ov02c10):
intel-ipu6 0000:00:05.0: Found supported sensor OVTI02C1:00
intel-ipu6 0000:00:05.0: Connected 1 cameras
ivsc_csi intel_vsc-92335fcf-3203-4472-af93-7b4453ac29da: mei-csi probed
without device fwnode!
No sensor subdevice is registered, the media graph has no sensor entity
and userspace finds no camera at all.
ipu_bridge_get_ivsc_csi_dev() first looks for the platform device named
"intel_vsc" and returns its mei-csi child. That device is created by
mei_vsc, which on this machine only appears once the LJCA USB bridge and
its SPI controller have probed, about a second after the IPU6 probe that
runs the bridge:
07:59:29.297 platform INTC10CF:00 created (ACPI scan)
07:59:41 intel-ipu6 probe -> ipu_bridge_init()
07:59:42.391 platform intel_vsc created (mei_vsc)
The commit above added two fallbacks for CVS which match on the ACPI
companion alone. They are reached for every entry of ivsc_acpi_ids[],
IVSC IDs included. The IVSC ACPI device has two physical nodes:
INTC10CF:00/physical_node -> platform/INTC10CF:00 (no driver bound)
INTC10CF:00/physical_node1 -> platform/intel_vsc (mei_vsc)
so bus_find_device_by_acpi_dev(&platform_bus_type, adev) returns the bare
platform device. ipu_bridge_instantiate_ivsc() then attaches the IVSC
software node to that device instead of to the mei-csi client, the bridge
reports success, and the probe is never retried. mei_csi later probes
without a fwnode, the CSI-2 link is never described, and the sensor ACPI
device, which has an honoured _DEP on the IVSC device, is never
enumerated.
Before those fallbacks existed the lookup returned NULL here, the bridge
failed with -ENODEV and the probe was retried once the IVSC device had
shown up.
Skip those fallbacks for IVSC devices, keying on the IVSC IDs rather than
the CVS ones: new CVS IDs keep being added, whereas the IVSC list is
complete. CVS binds a driver to the ACPI device itself, so matching on the
companion stays unambiguous there.
Fixes: c6b1b34b50 ("media: pci: intel: Add CVS support for IPU bridge driver")
Link: https://lore.kernel.org/linux-media/20260901194526.6369-1-gvozdoder@gmail.com/
Cc: stable@vger.kernel.org
Assisted-by: Claude Code:claude-opus-5
Signed-off-by: Sergey Zagursky <gvozdoder@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some laptops carry a MediaTek power table in their firmware, and the
driver reads it to set a transmit limit for each frequency range. It
only fills in the ranges themselves when it registers the device.
The startup step that does this existed already, but it never programmed
anything. Two recent commits made it run a regulatory update instead,
which sets the limits on the way through, long before registration.
As a result, on a machine that has the table the driver reads through an
empty pointer and the interface never appears:
BUG: kernel NULL pointer dereference, address: 0000000000000004
RIP: 0010:mt792x_init_acpi_sar_power
Call Trace:
mt7921_set_tx_sar_pwr
mt7921_mcu_regd_update
mt7921_regd_update
mt7921_run_firmware
mt7921e_mcu_init
mt7921_init_work
Skip it when the ranges are missing. They are applied again once the
device is up, which is where they came from before.
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/aoyxqHYvSuaBeubf@soda.int.kasm.eu/
Fixes: 9b80bd9cab ("wifi: mt76: mt7921: add regulatory wiphy self manager support")
Fixes: e9f3f1cc13 ("wifi: mt76: mt7925: add regulatory wiphy self manager support")
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Tested-by: David Gow <david@davidgow.net>
Tested-by: Klara Modin <klarasmodin@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Treat an out-of-range CLC index as newer firmware rather than a
malformed image. linux-firmware 20260810 ships MT7922 records with
idx 3, and rejecting them made mt7921e fail to probe.
Keep the record-length checks, and report those as errors so a
truncated table is visible instead of a silent retry loop.
Fixes: 9417c5818a ("wifi: mt76: mt7921: validate CLC firmware records")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Laxman Acharya Padhya <acharyalaxman8848@gmail.com>
Reviewed-by: Junjie Cao <junjie.cao@intel.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ring_buffer_subbuf_order_set() stores the new order and only then walks
the CPUs, returning -EBUSY if any of them has resizing disabled. A user
mapped buffer has resizing disabled, and __rb_map_vma() reads
buffer->subbuf_order without buffer->mutex, so an mmap of an already
mapped CPU racing the failing order change sizes the mapping with the
new order and inserts pages past the sub-buffer into the VMA.
Check the CPUs before storing the new order.
Cc: stable@vger.kernel.org
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Link: https://patch.msgid.link/20260912103938.1127021-1-devnexen@gmail.com
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The number of pages per remote ring buffer is capped by
ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
overflow that field would silently allocate a descriptor smaller than
what was asked for.
Return SIZE_MAX from trace_buffer_desc_size() on nr_page_va overflow.
Link: https://patch.msgid.link/20260911193937.602202-3-vdonnefort@google.com
Fixes: 2e67fabd8b ("ring-buffer: Introduce ring-buffer remotes")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount the
required pages because every ring buffer page contains a header
(BUF_PAGE_HDR_SIZE). Account for that header to ensure allocated remote
ring buffers aren't smaller than requested by the user.
The newly introduced helper __calc_nr_pages_ring_buffer_desc() can
return a value that overflows the descriptor nr_pages field (32 bits).
Link: https://patch.msgid.link/20260911193937.602202-2-vdonnefort@google.com
Fixes: 2e67fabd8b ("ring-buffer: Introduce ring-buffer remotes")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
snd_pcm_timer_init() calls snd_device_register() to link the new
struct snd_timer into the global timer list while it still carries
hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop),
and only afterwards sets timer->private_data = substream.
Once the timer is on the list under register_mutex, a concurrent
reader can already reach it through the same mutex and invoke these
callbacks. /proc/asound/timers does this via c_resolution(), and
snd_timer_open()+snd_timer_start() reach start()/stop() the same way.
All three dereference timer->private_data, which for this brief
window is NULL, giving a NULL-pointer dereference:
substream = timer->private_data;
return substream->runtime ? ... // substream is NULL
Move the private_data/private_free assignment before
snd_device_register() so the timer is never visible on the list
without its private_data set. On the snd_device_register() failure
path, private_free() (snd_pcm_timer_free()) can now run, but it only
does substream->timer = NULL, which is already NULL at that point
since substream->timer is set to the new timer just once, after a
successful registration -- so the failure path stays safe.
Reported-by: syzbot+19da64013c46df87f971@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=19da64013c46df87f971
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Nguyen Ngoc Thang <ngocthang2710.1999@gmail.com>
Link: https://patch.msgid.link/20260913134446.114724-1-ngocthang2710.1999@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Toolchain and infrastructure:
- Work around a 'bindgen' 0.73.2 bug that emits an 'allow' attribute
for 'unnecessary_transmutes', which is unknown in older compilers.
- Clean 'clippy::as_underscore' lints in generated code by the new
'bindgen' 0.73.0+ releases.
- Clean new 'clippy::needless_range_loop' lint for the upcoming Rust
1.100.0 (expected 2026-11-12).
'kernel' crate:
- 'num' module: fix soundness issue in 'Bounded' by sealing the
'Integer' trait.
'pin-init' crate:
- Fix unreachable warning for the upcoming Rust 1.100.0 (expected
2026-11-12) due to 'Infallible' becoming an alias of '!'.
Samples:
- Add missing newlines in 'pr_*!'s macro calls.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmqmuA8ACgkQGXyLc2ht
IW0ZVRAAk75N61v8xzY5dsQjA0O0ivCxDBqrPnFYYOq9jWWwKR4XF8zfX7dxPzFG
48NHlQ9s3XEOSfmoVdaab9DMz8l2gCLMcCUOqmEGZtf1ORlFqCn7m0OMXfsidgx9
YIWYSAySpjaQ27bg8+uvbBlBmD2KaE6zBlrAKbvdC9dJBOMfLjEnT3wtzkRkROzo
WJMyx+OjIk0kmFNMUPBV/J+VWyxP5IAl8C5xK/hl3L+tf0VeQWkn82f7zzoGfwRV
xLuIybzlxF2QK6D8OSf+SpxIqgl1fCDxh2rzWyNBJKbdGn1fMTTY7Ci6rM2DK853
PjmQWtlkrYIOnO7k2qdCebOOv8wOBKE1hNpK+23mkEUbsZjWPNgSHVuf6X098NuH
GEk5okH6+1e2w80dSRfUjKPY2omYhNoq4/4KEC+0IcV3xV+9FLq1uo9K/eOEr0Cf
z430H31YnollXCWUx56QJZ7p3r0dITwhKHPE9pfKB53yWZelTEboRuD1zRKYEO4E
0f+bDuLOAJeCzSX66YteZ+DiWphNB4OX49TGKRJpo9gWKn6+29TKIbJjAuk/oAu9
FVkE5//WAu8El5++1W0YE4AM5eVvhrarH4vo6q44o6bd3acNHHJDzwUR8fu3FSYA
skFb9vcRAq6vUPlzotlQMbuCP1PfBuFIhJdfqDcsVzGJO8oQPuk=
=/75K
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Work around a 'bindgen' 0.73.2 bug that emits an 'allow' attribute
for 'unnecessary_transmutes', which is unknown in older compilers
- Clean 'clippy::as_underscore' lints in generated code by the new
'bindgen' 0.73.0+ releases
- Clean new 'clippy::needless_range_loop' lint for the upcoming Rust
1.100.0 (expected 2026-11-12)
'kernel' crate:
- 'num' module: fix soundness issue in 'Bounded' by sealing the
'Integer' trait
'pin-init' crate:
- Fix unreachable warning for the upcoming Rust 1.100.0 (expected
2026-11-12) due to 'Infallible' becoming an alias of '!'
Samples:
- Add missing newlines in 'pr_*!'s macro calls"
* tag 'rust-fixes-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: allow `unknown_lints` in generated bindings for Rust < 1.88
rust: allow `clippy::as_underscore` in the generated bindings
rust: num: seal Integer
drm/panic: clean new `clippy::needless_range_loop` lint for Rust 1.100.0
rust: samples: add missing newlines in rust_print_main
rust: pin-init: use irrefutable pattern for `stack_pin_init`
- bootconfig: Fix integer overflow and truncation vulnerabilities in size checks
. tools/bootconfig: Fix integer overflow and truncation in size checks.
Fix size check bypasses caused by integer overflow and truncation
when parsing initrd or standalone bootconfig files, preventing
buffer overflow and out-of-bounds writes in the userspace tool.
. bootconfig: Fix integer overflow in initrd size check.
Fix pointer arithmetic wrap-around in get_boot_config_from_initrd()
when handling crafted huge size values, preventing fatal kernel
page faults during early boot.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmqml0UbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bXecH/jH1wLtkeeDumrR+5OGn
hbLnTDryprnhXBP7gKmYfcVRJzF9HZ1Ro12R8ea4N/NJieUi+EDQQ/yn6TdIpV3z
AU4In+zKT/q2hF3R1rmYuYxEMo9Po+dxgoB3BxKdwh9aDz8kPxQGP2/0Q/vjVMvZ
5YosoEGYtNW6NpovVK+nMkYY0TwGXtft3tdGvbdMFToGf73EgeDA7POgdCXYgiP2
D6equcjf7mRyBxzApCXzEEBynmHI6JTbZ6w0HGWN2bU9iwk/a/jiSBGGFrWopar6
YhQdySy7mmyHZaQUOiz6M6kYvmF0PaLsiA0NMmZ6B3uKPv+wc7OShSoiknGRgBJc
Vc4=
=TCCT
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-fixes-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
"Fix integer overflow and truncation in size checks.
- Fix size check bypasses caused by integer overflow and truncation
when parsing initrd or standalone bootconfig files, preventing
buffer overflow and out-of-bounds writes in the userspace tool.
- Fix pointer arithmetic wrap-around in get_boot_config_from_initrd()
when handling crafted huge size values, preventing fatal kernel
page faults during early boot"
* tag 'bootconfig-fixes-v7.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Fix integer overflow in initrd size check
tools/bootconfig: Fix integer overflow and truncation in size checks
- Fix clockevents replacement race when a broadcast
device is replaced which may trigger a BUG() crash
(朱恺乾 - Zhu Kaiqian)
- Fix potential timerqueue ordering bug when rearming
a queued timer with nonzero slack (Andrea Parri)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SyXt
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Fix clockevents replacement race when a broadcast
device is replaced which may trigger a BUG() crash
(朱恺乾 - Zhu Kaiqian)
- Fix potential timerqueue ordering bug when rearming
a queued timer with nonzero slack (Andrea Parri)
* tag 'timers-urgent-2026-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Use hard expiry when updating timers on the same base
tick/broadcast: Plug clockevents replacement race
- Fix EEVDF se->max_slice value on enqueueing (Vincent Guittot)
- Fix EEVDF augmented rb-trees re-balancing with
multiple fields (Vincent Guittot)
- In proxy scheduling, account cgroup CPU time to the execution
context, not the scheduling context (Hui Su)
- Likewise, call wq_worker_tick() for the execution context,
not the scheduling context (Hui Su)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmqmXEMRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hchg/6A1gRkn7T5+K957U8wpB9vjtV9cKVdWpI
XFDGm60ylFUmU388Xb8mmrbDgmej6RpX6C4ccppygM3196w513tB+Zr8w6jbSszk
ddgWwfwi58FFBJZTH7JDqeJ64wvrl8KId44yM6k2JdXATxh2DGF0w+YdsA+M5HVJ
EJbjACYhePdK27wvQDtj1poDfAyiabqEnv7w62dhEU9I+ikmcPAyrhmqU0yFDNUR
sNozsDQnEJrHtllGHpr3FVxYRqob6lOtG+86VSiZ8F6i2kA3p/451mpMyyCOMUrF
kZlBIryLG0gylXIensqLox+z2ZIE4nUL0OX3o7mC+MLNERdWvsdgHi9AcZlIoFpJ
wMPBLENnnGbilmwhXjk0pL655rlVVUGwaTV4T9Pk5D5qew6B9LGe8uqiLo8U/qih
1o5Lf3ZnUi0o8XHMfNkwQ3Y0m1S7CbgJYKItE+ec+2QifmKGD5dOKo5WWDKszywF
Zb9ScP2fMKideS/JEX1/+jvLcpDmV+HE3mC58Muek96fbJG1IQ4bL5tu+fqO85rM
68dJymtMrkoeegmq4jqERt758sZnyv2QbDmr1Kc1G9vSKNAeahYldPU2gQ6qFBnO
VCMvI2BUmfiia9A6NBKKgpjijc4zWydyuaQ2zdvEBddYnLWKZ5Ge26lLrjraNtdB
GtHalAP1gVs=
=zJHp
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF se->max_slice value on enqueueing (Vincent Guittot)
- Fix EEVDF augmented rb-trees re-balancing with multiple
fields (Vincent Guittot)
- In proxy scheduling, account cgroup CPU time to the execution
context, not the scheduling context (Hui Su)
- Likewise, call wq_worker_tick() for the execution context,
not the scheduling context (Hui Su)
* tag 'sched-urgent-2026-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Call wq_worker_tick() for the execution context
sched: Account cgroup CPU time to the execution context
sched/eevdf: Fix rb augmented with multi fields
sched/eevdf: Fix augmented max_slice
scx_alloc_and_add_sched() publishes ops->priv before
scx_root_enable_workfn() switches the state to SCX_ENABLING. An error
claimed via scx_bpf_error_bstr() from an associated BPF program in that
window is consumed by scx_disable_workfn(), which takes the pre-enable
shortcut in scx_root_disable(). The shortcut returns without any teardown
and restores SCX_DISABLED with an unconditional scx_set_enable_state() xchg
racing the enable workfn's own transition. The enable then completes with
the claim consumed: the scheduler stays up but can never be disabled again,
and bpf_scx_unreg() frees it while still in use, resulting in a
use-after-free. Both WARN_ON_ONCE()s fire back to back:
WARNING: kernel/sched/ext/ext.c:7522 at
scx_root_enable_workfn+0xeec/0x1be0, CPU#3: scx_enable_help/276
WARNING: kernel/sched/ext/ext.c:6398 at scx_root_disable+0xb50/0xdb8,
CPU#0: sched_ext_helpe/664
scx_root_enable_workfn() switches to SCX_ENABLING before the scheduler
allocation, so ops->priv is never visible while SCX_DISABLED. The allocation
failure path restores SCX_DISABLED.
Fixes: 105dcd005b ("sched_ext: Introduce scx_prog_sched()")
Cc: stable@vger.kernel.org
Signed-off-by: fangqiurong <fangqiurong@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fix sched_cb_list corruption on PMU callbacks that
invoke list_del() during perf_event_overflow()
calls (Thomas Richter)
- Fix PEBS pt_regs->flags snapshot data that was
regressed with the introduction of adaptive
PEBS v4 support (Dapeng Mi)
- Fix possible drain_pebs() re-entry bug
when intel_pmu_drain_pebs_buffer() is called from
process context (Dapeng Mi)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mKBo
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar
- Fix sched_cb_list corruption on PMU callbacks that
invoke list_del() during perf_event_overflow()
calls (Thomas Richter)
- Fix PEBS pt_regs->flags snapshot data that
regressed with the introduction of adaptive
PEBS v4 support (Dapeng Mi)
- Fix possible drain_pebs() re-entry bug when
intel_pmu_drain_pebs_buffer() is called from
process context (Dapeng Mi)
* tag 'perf-urgent-2026-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Prevent drain_pebs() reentry
perf/x86/intel: Correct pt_regs->flags update for PEBS path
perf/core: Allow list_del during perf_event_overflow()
The comment in the mtk_phy_tmds_clk_ratio() function clearly and
correctly explains that the TMDS ratio has to be 1/10 for data
rates under 3.4Gbps, and 1/40 over that.
Unfortunately though, the TXC_DIV register setting was wrong, as
in value 3 means to divide by 8 and, in order to achieve the in
spec 1/40 (tmds) data rate, this has to divide by 4 instead!
Add definitions for the TXC_DIV register values clearly explaining
the meanings (DIV2, DIV4, DIV8), and program the correct, DIV 4,
value to the register in mtk_phy_tmds_clk_ratio().
This fixes out of spec clocking and, with this change, SoCs using
the MT8195 class HDMI PHYs can now successfully be configured to
output 3840x2160@60Hz over HDMI.
Fixes: 45810d486b ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260911074015.9994-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When trying to calculate a PLL rate for target display resolutions
above 2560x1440, 24bpp, 30Hz, the pixel clock value will be more
than 32-bits long but the division to finally calculate the digital
clock divider is being done with div_u64(), which expects a 32bit
unsigned divisor.
Fix the overflow by using div64_u64() instead.
Fixes: 9d9ff3d2a4 ("phy: mediatek: hdmi: mt8195: fix wrong pll calculus")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260911074015.9994-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The OTG PHY initialization sequence needs to wait for 20 ms at a specific
step, as described in commit 72c0339c11 ("phy: renesas:
rcar-gen3-usb2: follow the hardware manual procedure").
Commit 55a387ebb9 ("phy: renesas: rcar-gen3-usb2: Lock around hardware
registers and driver data") tried to address various problems in the
rcar-gen3-usb2 driver and converted the mutex protecting HW register
accesses to a spin lock, leaving, however, a long delay in the critical
section protected by the spin lock. This may become a problem,
especially on RT kernels.
To address this, release the spin lock before sleeping for 20 ms as
required by the HW manual and reacquire it afterwards. To avoid other
threads entering the critical section and configuring the HW while the
software is waiting for the OTG initialization to complete, introduce the
otg_initializing variable alongside the otg_init_done wait queue. Any
other thread trying to configure the HW while the OTG PHY initialization
is in progress waits for the wait queue instead of immediately returning
errors to PHY users. The IRQs were also disabled while waiting for the OTG
PHY initialization to complete, as the interrupt handler may also apply HW
settings.
The OTG can only be initialized once. It is initialized by the first PHY
that calls struct phy_ops::rcar_gen3_phy_usb2_init().
To avoid failures when multiple PHYs call struct
phy_ops::rcar_gen3_phy_usb2_init() simultaneously, and the PHY responsible
for initializing the OTG either fails or deinit quiqly and another PHY
takes over the PHY init role), the code waiting for the
channel->otg_init_done wait queue retries up to NUM_OF_PHYS times.
Fixes: 55a387ebb9 ("phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data")
Cc: stable@vger.kernel.org
Reported-by: Pavel Machek <pavel@nabladev.com>
Closes: https://lore.kernel.org/all/afhkX2Ys2BG1gnqy@duo.ucw.cz
Reported-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Closes: https://lore.kernel.org/all/afhkX2Ys2BG1gnqy@duo.ucw.cz
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/all/afhkX2Ys2BG1gnqy@duo.ucw.cz
Link: https://patch.msgid.link/20260716183246.3183877-1-claudiu.beznea+renesas@tuxon.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
