Do not change the sampling rate value. Let userspace decide what
is the sampling rate to use.
Read only the requested axis.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This way there is no need anymore to export the power function to
i2c and spi modules.
Bus setup is done inside init when power is on and the result is
now checked.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If we are here it means we have fifo enabled for 1 sensor
at least. And interrupt is always required for using trigger.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
i2c auxiliary mux is done by analog switches. You do not need to
set them for every i2c transfer.
Just set i2c bypass bit at init and do noting in i2c de/select.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Split the binding in two to reflect the threshold monitor capabilities
and hence interrupts vs the more straight forward parts that
don't have this facility.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Clock should be enabled as soon as using master modes, even before
enabling timer. Or, this may provoke bad behavior on the other end
(slave timer). Then, introduce 'clk_enabled' flag, instead of relying
on CR1 EN bit, to keep track of clock being enabled (balanced refcount).
Propagate this anywhere else in the driver.
Also add 'remove' routine to stop timer and disable clock in case it
has been left enabled. Enforce the user interface has been unregistered
in the remove routine, before disabling the hardware to avoid possible
race. So, remove use of devm_ variant to register triggers and unregister
them before the hardware gets disabled [1].
[1] https://patchwork.kernel.org/patch/9956247/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- allow autoloading when build as module and defined inside DT
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_add_action_or_reset to automatically disable the device
and allow you to get rid of the remove function entirely.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AL3320a is fairly simple chip, so for suspend is enough to disable and
later enable it again.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Based on:
- 3320A in-kernel driver
- https://www.spinics.net/lists/linux-iio/msg25145.html
- https://lore.kernel.org/patchwork/patch/684179/
I decided to keep it aside of AL3320A due to different approach and much
simpler design of 3010.
Tested on Nexus 7 2012 (grouper/tilapia).
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- modified to be in part with al3010 driver
- cleanup using bitfield, no functionality change intended
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Dyna-Image AL3010 is a 16-bit digital ambient light sensor which
provides a multiple gain function with linear response over a dynamic
range 1216/4863/19452/77806.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit add dt-bindings support to al3320a driver and vendor-prefix
dynaimage.
Partly based on unmerged commit:
"iio: Add Dyna-Image AP3223 ambient light and proximity driver"
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move ad7192 ADC driver out of staging into mainline.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Updated mainline documentation on ad7192 userspace sysfs.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch removes spi_device_id table and moves the
init data (id of the chip) in the .data field
of of_device_id table.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch changes the static const struct iio_chan_spec arrays
in a way that all the necessary attributes are set at
compile time. Now ad7192_channels_config only makes the
channels attribute of iio_dev point to the right array depending
on the chip.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch makes the ad7192_probe fail in case
regulator_get_voltage will return an error or voltage
is set to 0.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds the posibility do read and write registers from userspace
using the kernel debug direct register access option.
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All of the actions done in `adis16460_initial_setup()` are now done in
`__adis_initial_startup()` so, there's no need for code duplication.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All actions done in `adis16480_initial_setup()` are now done in
`__adis_initial_startup()` so, there's no need for code duplication.
Furthermore, the call to `adis16480_initial_setup()` is done before any
device configuration since the device will be reset if not already (via
rst pin). This is actually fixing a potential bug since `adis_reset()` was
being called after configuring the device which is obviously a problem.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Each driver/chip that wants to validate it's product id, can now
specify a 'prod_id_reg' and an expected 'prod_id' value.
The 'prod_id' value is intentionally left 0 (uninitialized). There aren't
(yet) any product IDs with value 0; this enforces that both 'prod_id_reg'
and 'prod_id' are specified.
At the very least, this routine validates that the SPI connection to the
ADIS chip[s] works well.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All the ADIS devices perform, at the beginning, a self test to make sure
the device is in a sane state. Previously, the logic was that the self-test
was performed in adis_initial_startup() and if that failed a reset was done
and then a self-test was attempted again.
This change unifies the reset mechanism under the adis_initial_startup()
call. A HW reset will be done if GPIO is configured, or a SW reset
otherwise. This should make sure that the chip is in a sane state for
self-test. Once the reset is done, the self-test operation will be
performed. If anything goes wrong with self-test, the driver should just
bail/error-out (i.e. no second attempt). The chip would likely not be a in
a sane state state if the self-test fails after a reset.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds a dedicated self_test_reg variable. This is also a step
to let new drivers make use of `adis_initial_startup()`. Some devices
use MSG_CTRL reg to request a self_test command while others use the
GLOB_CMD register.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change splits the __adis_initial_startup() away from
adis_initial_startup(). The unlocked version can be used in certain calls
during probe, where races won't happen since the ADIS driver may not be
registered yet with IIO.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change overrides commit 380b107bbf ("iio: adis: Introduce timeouts
structure"). It removes the memory allocation and moves the 'adis_data'
information to be static on the chip_info struct.
This also adds a timeout structure to ADIS16334, since it was initially
omitted. This was omitted (by accident) when the change was done.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change overrides commit 380b107bbf ("iio: adis: Introduce timeouts
structure"). It removes the memory allocation and moves the 'adis_data'
information to be static on the chip_info struct.
This also adds a timeout structure to ADIS16334, since it was initially
omitted. This was omitted (by accident) when the change was done.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change overrides commit 380b107bbf ("iio: adis: Introduce timeouts
structure"). It removes the memory allocation and moves the 'adis_data'
information to be static on the chip_info struct.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add missing return value check in st_lsm6dsx_shub_read_oneshot disabling
the slave device connected to the st_lsm6dsx i2c controller.
The issue is reported by coverity with the following error:
Unchecked return value:
If the function returns an error value, the error value may be mistaken
for a normal value.
Addresses-Coverity-ID: 1456767 ("Unchecked return value")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add Beniamin Bia and Michael Hennerich as maintainers for HMC425A
attenuator.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document support for Analog Devices MC425A Step Attenuator.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch adds support for the HMC425A 0.5 dB LSB GaAs MMIC 6-BIT
DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz.
Datasheet:
https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
pa_laser_ping_cfg should be set in of_ping_match
instead of pa_ping_cfg.
Fixes: 7bb501f49d ("iio: ping: add parallax ping sensors")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SPS30 uses triggered buffer, but the dependency is not specified in the
Kconfig file. Fix this by selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER
config symbols.
Cc: stable@vger.kernel.org
Fixes: 232e0f6dde ("iio: chemical: add support for Sensirion SPS30 sensor")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
According to ST, the HID is for LIS2DH12.
Fixes: 3d56e19815 ("iio: accel: st_accel: Add support for the SMO8840 ACPI id")
Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Vishay has published a new version of "Designing the VCNL4200 Into an
Application" application note in October 2019. The new version specifies
that there is +-20% of part to part tolerance. Although the application
note is related to vcnl4200, according to support the vcnl4040's "ASIC
is quite similar to that one for the VCNL4200".
So update the sampling periods (and comment), including the correct
sampling period for proximity. Both sampling periods are lower. Users
relying on the blocking behaviour of reading will get proximity
measurements much earlier.
Fixes: 5a441aade5 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor")
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Vishay has published a new version of "Designing the VCNL4200 Into an
Application" application note in October 2019. The new version specifies
that there is +-20% of part to part tolerance. This explains the drift
seen during experiments. The proximity pulse width is also changed from
32us to 30us. According to the support, the tolerance also applies to
ambient light.
So update the sampling periods. As the reading is blocking, current
users may notice slightly longer response time.
Fixes: be38866fbb ("iio: vcnl4000: add support for VCNL4200")
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Data stored in the iio-buffer is BE and this
should be specified in the iio_chan_spec struct.
Fixes: f4f55ce38e ("iio:adxl372: Add FIFO and interrupts support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here are 4 small char/misc driver fixes for reported issues for 5.6-rc5.
These fixes are:
- binder fix for a potential use-after-free problem found (took
2 tries to get it right)
- interconnect core fix
- altera-stapl driver fix
All 4 of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXmSzSg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymzLwCg2CKlHDefZEuCI7d4Pgd5cgknMKgAoLQdQLrO
Pza+JqgZ8dSmUg8lyNw7
=3wFd
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are four small char/misc driver fixes for reported issues for
5.6-rc5.
These fixes are:
- binder fix for a potential use-after-free problem found (took two
tries to get it right)
- interconnect core fix
- altera-stapl driver fix
All four of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: prevent UAF for binderfs devices II
interconnect: Handle memory allocation errors
altera-stapl: altera_get_note: prevent write beyond end of 'key'
binder: prevent UAF for binderfs devices
Here are 4 small driver core / debugfs patches for 5.6-rc3
They are:
- debugfs api cleanup now that all callers for
debugfs_create_regset32() have been fixed up. This was
waiting until after the -rc1 merge as these fixes came in
through different trees
- driver core sync state fixes based on reports of minor issues
found in the feature
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXmS2Lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylvNgCfbnALILZh05QJPCfZv/seNFcFYLIAnRNAzxAU
mTPqUqTp5+WMXSzGigMa
=NyIX
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs fixes from Greg KH:
"Here are four small driver core / debugfs patches for 5.6-rc3:
- debugfs api cleanup now that all debugfs_create_regset32() callers
have been fixed up. This was waiting until after the -rc1 merge as
these fixes came in through different trees
- driver core sync state fixes based on reports of minor issues found
in the feature
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Skip unnecessary work when device doesn't have sync_state()
driver core: Add dev_has_sync_state()
driver core: Call sync_state() even if supplier has no consumers
debugfs: remove return value of debugfs_create_regset32()
Here are some small tty/serial fixes for 5.6-rc5
Just some small serial driver fixes, and a vt core fixup, full details
are:
- vt fixes for issues found by syzbot
- serdev fix for Apple boxes
- fsl_lpuart serial driver fixes
- MAINTAINER update for incorrect serial files
- new device ids for 8250_exar driver
- mvebu-uart fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXmS5vg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2pQCgxOELj7OkuHatZxw+hz5CjL5jO3sAn1jzrYeb
xnKsOnjMypc3nyMjCE7/
=1QlE
-----END PGP SIGNATURE-----
Merge tag 'tty-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial fixes for 5.6-rc5
Just some small serial driver fixes, and a vt core fixup, full details
are:
- vt fixes for issues found by syzbot
- serdev fix for Apple boxes
- fsl_lpuart serial driver fixes
- MAINTAINER update for incorrect serial files
- new device ids for 8250_exar driver
- mvebu-uart fix
All of these have been in linux-next with no reported issues"
* tag 'tty-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fsl_lpuart: free IDs allocated by IDA
Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE"
serdev: Fix detection of UART devices on Apple machines.
MAINTAINERS: Add missed files related to Synopsys DesignWare UART
serial: 8250_exar: add support for ACCES cards
tty:serial:mvebu-uart:fix a wrong return
vt: selection, push sel_lock up
vt: selection, push console lock down
Here are some small USB and PHY driver fixes for reported issues for
5.6-rc5.
Included in here are:
- phy driver fixes
- new USB quirks
- USB cdns3 gadget driver fixes
- USB hub core fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXmS/qw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynEUwCfWN11rUIm4gI3qL3IBnbDdyOwN+wAnj8Nt6gh
nNJi+MAmGC1hWaB5CiJY
=4eZ8
-----END PGP SIGNATURE-----
Merge tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are some small USB and PHY driver fixes for reported issues for
5.6-rc5.
Included in here are:
- phy driver fixes
- new USB quirks
- USB cdns3 gadget driver fixes
- USB hub core fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Update chain bit correctly when using sg list
usb: core: port: do error out if usb_autopm_get_interface() fails
usb: core: hub: do error out if usb_autopm_get_interface() fails
usb: core: hub: fix unhandled return by employing a void function
usb: storage: Add quirk for Samsung Fit flash
usb: quirks: add NO_LPM quirk for Logitech Screen Share
usb: usb251xb: fix regulator probe and error handling
phy: allwinner: Fix GENMASK misuse
usb: cdns3: gadget: toggle cycle bit before reset endpoint
usb: cdns3: gadget: link trb should point to next request
phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling
phy: brcm-sata: Correct MDIO operations for 40nm platforms
phy: ti: gmii-sel: do not fail in case of gmii
phy: ti: gmii-sel: fix set of copy-paste errors
phy: core: Fix phy_get() to not return error on link creation failure
phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval
Restore alignment of the continuation of the devm_ioremap() call in
intc_irqpin_probe().
Fixes: 4bdc0d676a ("remove ioremap_nocache and devm_ioremap_nocache")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200212084744.9376-1-geert+renesas@glider.be
GICR_SYNCR is a 32bit register, so it is better to access it with
32bit access width, though we have not seen any real problem.
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200225090023.28020-1-guoheyi@huawei.com
GPIO hardware block is directly linked to EXTI block but EXTI handles
external interrupts only on edge. To be able to handle GPIO interrupt on
level a "hack" is done in gpio irq chip: parent interrupt (exti irq chip)
is retriggered following interrupt type and gpio line value.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marek Vasut <marex@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200219143229.18084-3-alexandre.torgue@st.com
This commit introduces retrigger support for stm32_ext_h chip.
It consists to rise the GIC interrupt mapped to an EXTI line.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20200219143229.18084-2-alexandre.torgue@st.com
When transitioning some elder platforms to device tree it
becomes necessary to cascade VIC IRQ chips off another
interrupt controller.
Tested with the cascaded VIC on the Integrator/AP attached
logic module IM-PD1.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200219153543.137153-1-linus.walleij@linaro.org
