In its default configuration (SW2 on "UART1"), UART5 is exposed on the
DB9 RS232/RS485 connector. While the same signals are also exposed on
Q7_GPIO5 and Q7_GPIO6, a GPIO header, and thus could be used for other
purposes, RK3399 Puma Haikou and PX30 Ringneck Haikou do enable the UART
controller exposed on the DB9 connector, so let's keep consistency
across our modules and enable it on RK3588 Tiger Haikou by default too.
Add a comment while at it to explicit where this controller is routed
to.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250218-tsd-align-haikou-v1-1-5c44d1dd8658@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK 4D board is based on the Rockchip rk3576 SoC.
The device tree adds support for basic devices:
- UART
- SD Card
- Ethernet
- USB
- RTC
It has 4 USB ports but only 3 are usable as the top left one is used
for maskrom.
It has a USB-C port that is only used for powering the board.
Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20250218160714.140709-3-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds the otp node to the rk3576 soc devicetree including the
individual fields we know about.
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250210224510.1194963-7-heiko@sntech.de
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with RK3399 Puma SoM.
The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.
Its main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet because the expected clock rate by the driver
cannot be exactly reached by the clock driver). To drive these
components a number of additional regulators are grouped on the adapter
as well as a PCA9670 gpio-expander to provide the needed additional
gpio-lines.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-5-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with PX30 Ringneck SoM.
The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.
Itss main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet because the expected clock rate by the driver
cannot be exactly reached by the clock driver). To drive these
components a number of additional regulators are grouped on the adapter
as well as a PCA9670 gpio-expander to provide the needed additional
gpio-lines.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-4-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The HAIKOU-LVDS-9904379 adapter is an adapter for PX30 Ringneck with the
Haikou carrierboard. It is to be inserted in the fake PCIe slot labelled
Video Connector.
This adapter expects an Admatec 9904379 1024x600 LVDS display with
backlight and touchscreen. An EEPROM is also found on the adapter.
This adds support for this adapter on PX30 Ringneck when inserted in
Haikou carrierboard.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250221-ringneck-dtbos-v2-3-310c0b9a3909@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the RK3588's standalone hardware random number generator node to its
device tree, and enable it.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250204-rk3588-trng-submission-v2-6-608172b6fd91@collabora.com
[changed reset-id to its numeric value while the constant makes its
way through the crypto tree]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As the name implies, it is built around the RK3576 SoC with 4x Cortex-A72
cores, four Cortex-A53 cores and Mali-G52 MC3 GPU.
Storage options are EMMC, SD-Card, a 2242 M.2 slot and the possibility to
use UFS 2.0 storage.
Video Output options are a HDMI port, a DSI connector as well as Display-
Port via the TypeC connector (all of them not yet supported).
Networking options are a Low-profile Gigabit Ethernet RJ45 port with
Motorcomm YT8531 PHY as well as WiFi via an AMPAK AP6256 module.
USB ports on the board are 1x USB 3.0 port, 1x USB 2.0 port, 1x USB Type-C
and it comes with 40-pin GPIO header
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250210205126.1173631-3-heiko@sntech.de
Add devicetree binding for the ROC-RK3576-PC SBC.
The board is based on the RK3576 SoC (4*Cortex-A72 + 4*Cortex-A53).
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250210205126.1173631-2-heiko@sntech.de
The Pre-ICT tester adapter connects to RK3588 Jaguar SBC through its
proprietary Mezzanine connector.
It exposes a PCIe Gen2 1x M.2 connector and two proprietary camera
connectors. Support for the latter will come once the rest of the camera
stack is supported.
Additionally, the adapter loops some GPIOs together as well as route
some GPIOs to power rails.
This adapter is used for manufacturing RK3588 Jaguar to be able to test
the Mezzanine connector is properly soldered.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org> # Makefile
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250211-pre-ict-jaguar-v6-4-4484b0f88cfc@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
According to commit 4065853475 ("arm64: dts: rockchip: Add rock5b
overlays for PCIe endpoint mode"), Rock 5B can operate in PCIe endpoint
mode. For that to work, the rk3588-rock-5b-pcie-ep.dtbo overlay needs to
be applied on Rock 5B base Device Tree. If that Rock 5B is connected to
another Rock 5B, the latter needs to apply the
rk3588-rock-5b-pcie-srns.dtbo overlay.
In order to make sure the overlays are still valid in the future, let's
add a validation test by applying the overlays on top of the main base
at build time.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250211-pre-ict-jaguar-v6-3-4484b0f88cfc@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Edgeble NCM6A/NCM6B can have WiFi modules connected and this is
handled via an overlay (commit 951d6aaa37 ("arm64: dts: rockchip: Add
Edgeble NCM6A WiFi6 Overlay")).
Despite the name of the overlay, it applies to both NCM6A and NCM6B[1].
In order to make sure the overlay is still valid in the future, let's
add a validation test by applying the overlay on top of the main bases
at build time.
[1] https://lore.kernel.org/linux-rockchip/CA+VMnFyom=2BmJ_nt-At6hTQP0v+Auaw-DkCVbT9mjndMmLKtQ@mail.gmail.com/
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250211-pre-ict-jaguar-v6-2-4484b0f88cfc@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The WolfVision PF5 can have a PF5 Visualizer display and PF5 IO Expander
board connected to it. Therefore, let's generate an overlay test so the
application of the two overlays are validated against the base DTB.
Suggested-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250211-pre-ict-jaguar-v6-1-4484b0f88cfc@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Going over the 80-column width limit, and using all 100 columns, is intended
for improving code readability. This wasn't the case in a few places in the
Quartz64 Model A/B board dts files, so let's reflow them a bit, to both obey
the 80-column limit and make them a bit more readable.
No intended functional changes are introduced by these changes.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/7eea4ebdb19d5f43d24074a166e6c46bb5424d46.1739218324.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Remove Optee node from rk3588 devicetree. When Optee is present and
used the node will be added automatically by U-Boot when
CONFIG_OPTEE_LIB=y and CONFIG_SPL_ATF_NO_PLATFORM_PARAM is not set.
When Optee is not present or used, the node will trigger a probe
that generates a (harmless) message on the kernel log.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250130181005.6319-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Edgeble-6TOPS modules configure HDMI1 for HDMI Out from RK3588.
Enable it on Edgeble-6TOPS IO Board dtsi.
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20241227132936.168100-1-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the necessary DT changes to enable the second HDMI output port on
Radxa ROCK 5B.
While at it, switch the position of &vop_mmu and @vop to maintain the
alphabetical order.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Alexandre ARNOUD <aarnoud@me.com>
Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-4-02cdca22ff68@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for the second HDMI TX port found on RK3588 SoC.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-6tops-modules
Tested-by: Alexandre ARNOUD <aarnoud@me.com>
Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-3-02cdca22ff68@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In preparation to enable the second HDMI output port found on RK3588
SoC, add the related PHY node. This requires a GRF, hence add the
dependent node as well.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Jagan Teki <jagan@edgeble.ai> # edgeble-6tops-modules
Tested-by: Alexandre ARNOUD <aarnoud@me.com>
Link: https://lore.kernel.org/r/20241211-rk3588-hdmi1-v2-2-02cdca22ff68@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
H96 Max V58 has its spdif_tx0 controller wired to a dedicated optical
Toslink SPDIF socket, enable it in the device tree
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250120-rk3588-spdif-v1-3-1415f5871dc7@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip company name has update to below name since 2021:
Rockchip Electronics Co., Ltd.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241205082258.857018-1-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add dts for Ariaboard Photonicat RK3568.
Partially based on downstream board dts. [1]
Working IO:
Debug UART
SDIO QCA9377 WiFi and Bluetooth
M.2 E-Key PCIe WiFi and Bluetooth
M.2 B-Key USB Modem WWAN
Ethernet WAN Port
MicroSD Card slot
eMMC
HDMI Output
Mali GPU
USB Type-A
Not working IO:
Ethernet LAN Port (Lack of SGMII support)
Power management MCU on UART4 (Driver pending)
Not working IO in MCU:
Battery voltage sensor
Board temperature sensor
Hardware Power-off
Hardware Watchdog
Network status LED
Real-time clock
USB Charger voltage sensor
About onboard power management MCU:
A heartbeat must be sent to the MCU within 60 seconds,
otherwise the MCU will restart the system.
When powering off, a shutdown command needs to be sent to the MCU.
When the power button is long pressed, the MCU will send a shutdown
command to the system. If system does not shutdown within 60 seconds,
the power will be turned off directly.
MCU only provides voltage for charger and battery.
Manufacturer removed RK8xx PMIC.
[1] https://github.com/photonicat/rockchip_rk3568_kernel/blob/novotech-5.10/arch/arm64/boot/dts/rockchip/rk3568-photonicat-base.dtsi
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Link: https://lore.kernel.org/r/20250114001411.1848529-4-bigfoot@classfun.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Radxa Rock 5C supports both CRU-based (default) and PMIC-based reset
upon thermal runaway conditions. The former resets the SoC by internally
poking the CRU from TSADC, while the latter power-cycles the whole board
by pulling the PMIC reset line low in case of uncontrolled overheating.
Switch to a PMIC-based reset, as the more 'thorough' of the two.
Tested by temporarily setting rockchip,hw-tshut-temp to 65C to simulate
overheating - this causes the board to reset when any of the on-chip
temperature sensors surpasses the tshut temperature.
Requires Alexander's patch [1] fixing TSADC pinctrl assignment
[1] https://lore.kernel.org/r/20250130053849.4902-1-eagle.alexander923@gmail.com
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250204-rock-5c-tshut-v1-1-33301e4eef64@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the recommended chassis-type root node property so userspace can
request the form factor and adjust their behavior accordingly.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250207111157.297276-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The hdptxphy is a combo transmit-PHY for HDMI2.1 TMDS Link, FRL Link, DP
and eDP Link. Therefore, it is better to name it hdptxphy0 other than
hdptxphy_hdmi0, which will be referenced by both hdmi0 and edp0 nodes.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250206030330.680424-3-damon.ding@rock-chips.com
[added armsom-sige7, where hdmi-support was added recently and also
the hdptxphy0-as-dclk source I just added]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and
more accurate pixel clock source to improve handling of display modes up
to 4K@60Hz on video ports 0, 1 and 2.
For now only HDMI0 output is supported, hence add the related PLL clock.
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250204-vop2-hdmi0-disp-modes-v3-5-d71c6a196e58@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since commit c4b09c5620 ("phy: phy-rockchip-samsung-hdptx: Add clock
provider support"), the HDMI PHY PLL can be used as an alternative and
more accurate pixel clock source for VOP2 to improve display modes
handling on RK3588 SoC.
Add the missing #clock-cells property to allow using the clock provider
functionality of HDMI0 PHY.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20250204-vop2-hdmi0-disp-modes-v3-4-d71c6a196e58@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The preferred way to denote hardware with non-coherent DMA is to use the
"dma-noncoherent" DT property, at both the GIC redistributor and the GIC ITS
levels, [1] instead of relying on the compatibles to handle hardware errata,
in this case the Rockchip 3588001 errata. [2]
Let's have the preferred way employed in the base Rockchip RK3588 SoC dtsi,
which also goes along with adding initial support for the Rockchip RK3582 SoC
variant, with its separate compatible. [2][3]
[1] Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
[2] https://lore.kernel.org/linux-rockchip/86msgoozqa.wl-maz@kernel.org/
[3] https://lore.kernel.org/linux-rockchip/20241222030355.2246-4-naoki@radxa.com/
Cc: Marc Zyngier <maz@kernel.org>
Cc: FUKAUMI Naoki <naoki@radxa.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/fa1a672dae3644bb3caa58f03216d0ca349db88b.1736279094.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the necessary cooling map to enable the kernel's thermal subsystem
to manage the fan speed automatically depending on the overall SoC
package temperature on Radxa Rock 5C
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250120-rock-5c-fan-v1-2-5fb8446c981b@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Radxa Heatsink 6540B, which is the official cooling accessory for the
Rock 5C board, includes a small 5V fan, which in my testing spins up
reliably at a PWM setting of 24 (out of 255). It is also quite loud
at the current minimum setting of 64, and noticeably less so at 24.
Introduce two intermediate PWM states at the lower end of the fan's
operating range to enable better balance between noise and cooling.
Note further that, in my testing, having the fan run at 44 is enough
to keep the system from thermal throttling with sustained 100% load
on its 8 CPU cores (in 22C ambient temperature and no case)
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Acked-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250120-rock-5c-fan-v1-1-5fb8446c981b@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEE67dNfPFP+XUaA73mB9BFOha3NhcFAmefpLQUHGxlbi5icm93
bkBpbnRlbC5jb20ACgkQB9BFOha3NhcaSxAAuueCaE6WJdaqm2f+qsxzpjsJ+Kvk
4/RNLLSc8kpENv4O5wGdcaz5NaUKIpXCzP0VQgp+kESJeKfD0mQ54GF5iNX8f4dp
sJM5/tTnm+2k5/tU7bvNv99Ud/SZib7lRficKthdGeCBtaIAEbnJ0ypwZAB73WbM
nPRT/btUF2Ib2WYd0LkAje1MkZELnJSzasugEIrIoKAHhOAIrlz5SOUZsvLJNlsM
YJSb22NeQl3TSygauHnd8jRpN6lbbAuclRmgANHM15tP2XxnfRJ8uEilGt8PZ121
WYMtUzkI3Mi3OjuveDxtJxTqX4iqEr4tpwmrn36rtHJs2NNbHJXrHTLvpQv+wG/U
RklbJ6W8DAAWy14glNpTekz3/E1Pud4HEDU4t5g8j9nRndc0BlGO8eljVroajmf2
ONkWQhsdnPB6kjnXsCxYeFoPxSUB8joFAYh75cllHgN0WITZnIru6ValCRPtHZYB
bULn9K4WXgOBewyZjTlLQvj9H/yHH33T4lORhOgjErpiMfsKNywR5gGNEJ7qRS/G
gNlEBhwe+wQ3ueuvTsObPZje0dWWJ6mWOlEsuJp7FDEDoK2pHnEwi5pdzS5mm6fR
6AvlRxVGgmO/V9YXxrjYos8pKTkY/WEAi3D5LAQtKilo1jffmr5F9wt3hTk2VKgB
cCHSemO3db8vBLE=
=mWV6
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
- sh: boards: Use imply to enable hardware with complex dependencies
- sh: Migrate to the generic rule for built-in DTB
- sh: irq: Use seq_put_decimal_ull_width() for decimal values
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEYv+KdYTgKVaVRgAGdCY7N/W1+RMFAmefPVYACgkQdCY7N/W1
+ROC5A//cG3N/oT8RhKtGNQyeuEBpxswHY0itbQ7G7N6DPXMcryu2jjg+ipVLobC
6+fEsSQZt8AhsGOWsaem3adNsqPh362RhhgrMStmree8wMXyEDFUOGn4QtW0GHHA
Y/UODeJxjwgAIBLuQ5ckn6c1+k0iVc51zeBvtQkQI86h2TT4IYehB8e605EFsman
h6PvinS+n7cyEtYQrszUFH3VpYX1Q4xPKQREhmzVIyRNQonfwEZNAbgJUxs3JsV8
BJqxJoCST7DNdiq6969DaFGuGcIldQcuARDxEAv1NZwymudVsEJWjpyfR23SyIbe
ztsB4NHkxGwHml51dVLliLHCnY2ARdoo2Ohq6wpa7OdwOKA42FdSSgrVYEjMHRCT
PlEuPMnNxNXcckUG6hW5G5GoxY7LOCrcOeJrpoNDmQsNHq88+N3Y5Vj5YTuGUwun
826r5ilxQHGwBlhZW6kbAvaTGdLCs9bSwS1Sc4yojlBUxSM1Bgtuv0iBY7zNIfiX
9f7zb7Xde5XGMpMoRtL8A3FzMFKDaMTuLSXbNL7KCkQJvsb9Q45zOd5G+eawcBMr
0bJDRFo6MUmQfXXkGtZLK8zqixOnrL3JQaBNtQhiB8QDueyaaXtJza5TPFeNE25j
/8VldUlv/bQyymOvuOHoEEG3kQBQGc7Iwb9dBtbZiLLRpgdxNY8=
=G6GL
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ5yJdgAKCRBZ7Krx/gZQ
69W4AQDwgxceiQ6icx3rFhCWQigne4jdMO84kd8tNaa+xHGe1AD/WnkeChc5DqjQ
wZWZxAAzml9SS01IcSiHWaF5fgrjlA0=
=rXOq
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
-----BEGIN PGP SIGNATURE-----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=/P+2
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
Here is a single debugfs fix from Al to resolve the reported regression
in linux-next and in the driver-core tree. It has been reported to fix
the issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ55HfQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykocACgqvoq+99sC6joNEqAuZZil/PU/1wAoNJtys1x
3JTFgphXSjoyMBsmM96b
=pRKD
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull debugfs fix from Greg KH:
"Here is a single debugfs fix from Al to resolve a reported regression
in the driver-core tree. It has been reported to fix the issue"
* tag 'driver-core-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
debugfs: Fix the missing initializations in __debugfs_file_get()
13 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ54MEgAKCRDdBJ7gKXxA
jlhdAP0evTQ9JX+22DDWSVdWFBbnQ74c5ddFXVQc1LO2G2FhFgD+OXhH8E65Nez5
qGWjb4xgjoQTHS7AL4pYEFYqx/cpbAQ=
=rN+l
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
-----BEGIN PGP SIGNATURE-----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=49gN
-----END PGP SIGNATURE-----
Merge tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"A revert for a regression in the uvcvideo driver"
* tag 'media/v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
Revert "media: uvcvideo: Require entities to have a non-zero unique ID"
MM developers have an interest in the xarray code.
Cc: David Gow <davidgow@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
