- Allow the COMMON_CLK config to be selectable
* clk-selectable:
clk: Move HAVE_CLK config out of architecture layer
MIPS: Loongson64: Drop asm/clock.h include
ARM: mmp: Remove legacy clk code
clk: Allow the common clk framework to be selectable
mmc: meson-mx-sdio: Depend on OF_ADDRESS and not just OF
MIPS: Remove redundant CLKDEV_LOOKUP selects
h8300: Remove redundant CLKDEV_LOOKUP selects
arm64: tegra: Remove redundant CLKDEV_LOOKUP selects
ARM: Remove redundant CLKDEV_LOOKUP selects
ARM: Remove redundant COMMON_CLK selects
* clk-amlogic:
clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
clk: meson: meson8b: Make the CCF use the glitch-free VPU mux
clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
clk: meson: meson8b: Fix the polarity of the RESET_N lines
clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
clk: meson: g12a: Prepare the GPU clock tree to change at runtime
clk: meson: gxbb: Prepare the GPU clock tree to change at runtime
clk: meson: meson8b: make the hdmi_sys clock tree mutable
clk: meson8b: export the HDMI system clock
* clk-renesas:
dt-bindings: clock: renesas: mstp: Convert to json-schema
dt-bindings: clock: renesas: div6: Convert to json-schema
clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling
clk: renesas: rcar-gen2: Remove superfluous CLK_RENESAS_DIV6 selects
clk: renesas: cpg-mssr: Add R8A7742 support
dt-bindings: clock: renesas: cpg-mssr: Document r8a7742 binding
clk: renesas: Add r8a7742 CPG Core Clock Definitions
dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros
MAINTAINERS: Add DT Bindings for Renesas Clock Generators
clk: renesas: r9a06g032: Fix some typo in comments
dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add r8a77961 support
* clk-samsung:
clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough;
clk: samsung: Fix CLK_SMMU_FIMCL3 clock name on Exynos542x
clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
* clk-allwinner:
clk: sunxi: Fix incorrect usage of round_down()
Fix the following gcc warning:
drivers/clk/ti/clk-7xx.c:320:43: warning: ‘dra7_gpu_sys_clk_data’
defined but not used [-Wunused-const-variable=]
static const struct omap_clkctrl_div_data dra7_gpu_sys_clk_data
__initconst = {
^~~~~~~~~~~~~~~~~~~~~
drivers/clk/ti/clk-7xx.c:315:27: warning: ‘dra7_gpu_sys_clk_parents’
defined but not used [-Wunused-const-variable=]
static const char * const dra7_gpu_sys_clk_parents[] __initconst = {
^~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lkml.kernel.org/r/20200417073523.42520-1-yanaijie@huawei.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We need to have clocks accessible via phandle to select them
as peripheral clock parent using assigned-clock-parents in DT.
Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For the most part the Agilex clock structure is very similar to
Stratix10, so we re-use most of the Stratix10 clock driver.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-5-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document the Agilex clock bindings, and add the clock header file. The
clock header is an enumeration of all the different clocks on the Agilex
platform.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-4-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The enable/disable clock ops are already defined in the standard clock
ops, so we don't need to assign them.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert, where possible, the stratix10 clock driver to the new parent
data scheme by specifying the parent data for clocks that have multiple
parents.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20200512181647.5071-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix sparse warning:
drivers/clk/zynqmp/divider.c:259:5: warning:
symbol 'zynqmp_clk_get_max_divisor' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lkml.kernel.org/r/20200403083040.37748-1-yuehaibing@huawei.com
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Older firmware version sets BIT(13) in clkflag to mark a
divider as fractional divider. Updated firmware version sets BIT(4)
in type flags to mark a divider as fractional divider since
BIT(13) is defined as CLK_DUTY_CYCLE_PARENT in the common clk
framework flags.
To support both old and new firmware version, consider BIT(13) from
clkflag and BIT(4) from type_flag to check if divider is fractional
or not.
To maintain compatibility BIT(13) of clkflag in firmware will not be
used in future for any purpose and will be marked as unused.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1584048699-24186-3-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Store extra custom type flags received from firmware.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1584048699-24186-2-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clock driver makes EEMI call to get the name of invalid clk
when executing versal_get_clock_info() function. This results in
error messages.
Added check for validating clock before saving clock attribute and
calling zynqmp_pm_clock_get_name() in versal_get_clock_info() function.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1583185843-20707-4-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
zynqmp_get_divider2_val() calculates, divider value of type DIV2 clock,
considering best possible combination of DIV1 and DIV2.
To find best possible values of DIV1 and DIV2, DIV1's parent rate
should be consider and not DIV2's parent rate since it would rate of
div1 clock. Consider a below topology,
out_clk->div2_clk->div1_clk->fixed_parent
where out_clk = (fixed_parent/div1_clk) / div2_clk, so parent clock
of div1_clk (i.e. out_clk) should be divided by div1_clk and div2_clk.
Existing code divides parent rate of div2_clk's clock instead of
div1_clk's parent rate, which is wrong.
Fix the same by considering div1's parent clock rate.
Fixes: 4ebd92d2e2 ("clk: zynqmp: Fix divider calculation")
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1583185843-20707-3-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Clock divider value should not be greater than maximum divider value.
So use minimum of best divider or maximum divider value.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lkml.kernel.org/r/1583185843-20707-2-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- A few patches from Abel Vesa as preparation of adding audiomix clock
support.
- A couple of cleanups from Anson Huang on clk-sscg-pll and clk-pllv3
driver.
- Update imx7ulp clock driver to use imx_clk_hw_cpu() for making the
change of ARM core clock easier.
- Drop dependency on ARM64 for i.MX8M clock driver, as there is a move
to support aarch32 mode on aarch64 hardware.
- A series from Peng Fan to improve i.MX8M clock drivers, using
composite clock for core and bus clk slice.
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
defined bit rates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7IdcYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4S5gf+JxCArAsvIAsld1K8unmhNWR1ZOOx
AY5T+xGJU/dD4sGP8EUHzVyR7cTDYZgOzrcmVJb1byxFNSziuzXdoCtmKJeBmJjV
ypjSN7x3yOT5D+jXfC1eCTU5Y2if/nOaonfY3hIFEqDESxUztL9KY/PP5IE3xjPz
lu/EzKTdw/Pc6z9q2Qt2HVssyZVr+X2KI51fLWE/ekE8xKD6MwlXbb0JQ+mKeq5c
mZhgg0AlxwYkhbJqOt/aL4wTasvTMu1C8cwi5nJtDrwZ8DM+8SvmFBd9B6t6pMPy
ILs25d9iTcJRs0C7oIqY2HDIP+CSJJC2qfLQpo2O2RXo1hZN3GGAfYjgyA==
=nRbl
-----END PGP SIGNATURE-----
Merge tag 'clk-imx-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-imx
Pull i.MX clk driver updates from Shawn Guo:
- A few patches from Abel Vesa as preparation of adding audiomix clock
support
- A couple of cleanups from Anson Huang on clk-sscg-pll and clk-pllv3
driver
- Update imx7ulp clock driver to use imx_clk_hw_cpu() for making the
change of ARM core clock easier
- Drop dependency on ARM64 for i.MX8M clock driver, as there is a move
to support aarch32 mode on aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using
composite clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
defined bit rates
* tag 'clk-imx-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
clk: imx: use imx8m_clk_hw_composite_bus for i.MX8M bus clk slice
clk: imx: add imx8m_clk_hw_composite_bus
clk: imx: add mux ops for i.MX8M composite clk
clk: imx8m: migrate A53 clk root to use composite core
clk: imx8mp: use imx8m_clk_hw_composite_core to simplify code
clk: imx8mp: Define gates for pll1/2 fixed dividers
clk: imx: imx8mp: fix pll mux bit
clk: imx8m: drop clk_hw_set_parent for A53
dt-bindings: clocks: imx8mp: Add ids for audiomix clocks
clk: imx: Add helpers for passing the device as argument
clk: imx: pll14xx: Add the device as argument when registering
clk: imx: gate2: Allow single bit gating clock
clk: imx: clk-pllv3: Use readl_relaxed_poll_timeout() for PLL lock wait
clk: imx: clk-sscg-pll: Remove unnecessary blank lines
clk: imx: drop the dependency on ARM64 for i.MX8M
clk: imx7ulp: make it easy to change ARM core clk
clk: imx: imx6ul: change flexcan clock to support CiA bitrates
Thise are a couple of changes to implement EMC frequency scaling on
Tegra210, CPU frequency scaling on Tegra20 and Tegra30 as well as a
special clock gate for the CSI test pattern generator on Tegra210.
-----BEGIN PGP SIGNATURE-----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=Sz0T
-----END PGP SIGNATURE-----
Merge tag 'for-5.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-tegra
Pull Tegra clk driver updates from Thierry Reding:
These are a couple of changes to implement EMC frequency scaling on
Tegra210, CPU frequency scaling on Tegra20 and Tegra30 as well as a
special clock gate for the CSI test pattern generator on Tegra210.
* tag 'for-5.8-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: Add Tegra210 CSI TPG clock gate
clk: tegra30: Use custom CCLK implementation
clk: tegra20: Use custom CCLK implementation
clk: tegra: cclk: Add helpers for handling PLLX rate changes
clk: tegra: pll: Add pre/post rate-change hooks
clk: tegra: Add custom CCLK implementation
clk: tegra: Remove the old emc_mux clock for Tegra210
clk: tegra: Implement Tegra210 EMC clock
clk: tegra: Export functions for EMC clock scaling
clk: tegra: Add PLLP_UD and PLLMB_UD for Tegra210
clk: tegra: Rename Tegra124 EMC clock source file
dt-bindings: clock: tegra: Add clock ID for CSI TPG clock
Allwinner clock support.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXr7NfAAKCRDj7w1vZxhR
xXarAP4wdfOSI6mpPQstJnueouvozab7dSOAJhZCdyy6gD+SHQD/arhVv5dPyAub
MUA0yjWdgCGSrD+UQjLwSb/RsinoVgA=
=2qN3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-for-5.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner
Pull an Allwinner clk driver fix from Maxime Ripard:
- a single minor rounding fix for the legacy Allwinner clock support
* tag 'sunxi-clk-for-5.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi: Fix incorrect usage of round_down()
- Regression fixes for exynos542x and exynos5433 SoCs,
- use of fallthrough; attribute for s3c24xx.
-----BEGIN PGP SIGNATURE-----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=2gSb
-----END PGP SIGNATURE-----
Merge tag 'clk-v5.8-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-samsung
Pull Samsung clk driver updates from Sylwester Nawrocki:
- Regression fixes for exynos542x and exynos5433 SoCs
- use of fallthrough; attribute for s3c24xx
* tag 'clk-v5.8-samsung' of https://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES: Use fallthrough;
clk: samsung: Fix CLK_SMMU_FIMCL3 clock name on Exynos542x
clk: samsung: Mark top ISP and CAM clocks on Exynos542x as critical
- A minor fix for the currently unused suspend/resume handling on
RZ/A1 and RZ/A2,
- Two more conversions of DT bindings to json-schema.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXsUmjQAKCRCKwlD9ZEnx
cFHxAQDlSobT0AiUKgbqOWdBj7paDio9eqr9FDi0pPq2cIoTUQD+IlxT04dFk6mD
d8P0w7JNcBE61aCGVV4Rb9PYNUBlHgU=
=p0gB
-----END PGP SIGNATURE-----
Merge tag 'clk-renesas-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull Renesas clk driver updates from Geert Uytterhoeven:
- A minor fix for the currently unused suspend/resume handling on
RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
* tag 'clk-renesas-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
dt-bindings: clock: renesas: mstp: Convert to json-schema
dt-bindings: clock: renesas: div6: Convert to json-schema
clk: renesas: cpg-mssr: Fix STBCR suspend/resume handling
Switch the bus clk use imx8m_clk_hw_composite_bus, then
we could avoid possible issue when setting mux of the clk.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Introduce imx8m_clk_hw_composite_bus api for bus clk root slice usage.
Because the mux switch sequence issue, we could not reuse Peripheral
Clock Slice code, need use composite specific mux operation.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The CORE/BUS root slice has following design, simplied graph:
The difference is core not have pre_div block.
A composite core/bus clk has 8 inputs for mux to select, saying clk[0-7].
It support target(smart) interface and normal interface. Target interface
is exported for programmer easy to configure ccm root. Normal interface
is also exported, but we not use it in our driver, because it will
introduce more complexity compared with target interface.
The normal interface simplified as below:
SEL_A GA
+--+ +-+
| +->+ +------+
CLK[0-7]--->+ | +-+ |
| | | +----v---+ +----+
| +--+ |pre_diva+----> | +---------+
| +--------+ |mux +--+post_div |
| +--+ |pre_divb+--->+ | +---------+
| | | +----^---+ +----+
+--->+ | +-+ |
| +->+ +------+
+--+ +-+
SEL_B GB
The mux in the upper pic is not the target interface MUX, target
interface MUX is hiding SEL_A and SEL_B. When you choose clk[0-7],
you are actually writing SEL_A or SEL_B depends on the internal
counter which will also control the internal "mux".
The target interface simplified as below which is used by Linux Kernel:
CLK[0-7]--->MUX-->Gate-->pre_div-->post_div
A requirement of the Target Interface's software is that the
target clock source is active, it means when setting SEL_A, the
current input clk to SEL_A must be active, same to SEL_B.
We touch target interface, but hardware logic actually also need
configure normal interface.
There will be system hang, when doing the following steps:
The initial state:
SEL_A/SEL_B are both sourcing from clk0, the internal counter
choose SEL_A.
1. switch mux from clk0 to clk1
The hardware logic will choose SEL_B and configure SEL_B to clk1.
SEL_A no changed.
2. gate off clk0
Disable clk0, then the input to SEL_A is off.
3. swtich from clk1 to clk2
The hardware logic will choose SEL_A and configure SEL_A to clk2,
however the current SEL_A input clk0 is off, the system hang.
The solution to fix the issue is in step 1, write twice to
target interface MUX, it will make SEL_A/SEL_B both sources
from clk1, then no need to care about the state of clk0. And
finally system performs well.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Convert the Renesas Clock Pulse Generator (CPG) Module Stop (MSTP)
Clocks Device Tree binding documentation to json-schema.
Drop R-Car Gen2 compatible values, which were obsoleted by the unified
"Renesas Clock Pulse Generator / Module Standby and Software Reset" DT
bindings.
Replace the obsolete example for R-Car H2 by an example that is still
valid.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200508100321.6720-1-geert+renesas@glider.be
Migrate A53 clk root to use composite core clk type. It
will simplify code and make it easy to use composite
specific mux operation.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use imx8m_clk_hw_composite_core to simpliy clks that belong to
core clk slice.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Inspried from
commit e8688fe8df ("clk: imx8mn: Define gates for pll1/2 fixed dividers")
On imx8mp there are 9 fixed-factor dividers for SYS_PLL1 and SYS_PLL2
each with their own gate. Only one of these gates (the one "dividing" by
one) is currently defined and it's incorrectly set as the parent of all
the fixed-factor dividers.
Add the other 8 gates to the clock tree between sys_pll1/2_bypass and
the fixed dividers.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Same to i.MX8MN/i.MX8MM, pll BYPASS bit should be kept inside pll
driver for glitchless freq setting following spec. If exposing the
bit, that means pll driver and clk driver has two paths to touch
this bit, which is wrong.
So use EXT_BYPASS bit here.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The parent settings have been moved to dtsi, we no need to
set parent here. And clk_hw_set_parent will trigger lockdep warning,
because this api not have prepare_lock.
Reported-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to
match its behaviour with SCLK clock for AUD_I2S (I2S0) device until
a proper fix for Exynos I2S driver is ready.
This fixes the following synchronous abort issue revealed by the probe
order change caused by the commit 93d2e4322a ("of: platform: Batch
fwnode parsing when adding all top level devices")
Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701
Hardware name: Samsung TM2E board (DT)
Workqueue: events deferred_probe_work_func
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : samsung_i2s_probe+0x768/0x8f0
lr : samsung_i2s_probe+0x688/0x8f0
...
Call trace:
samsung_i2s_probe+0x768/0x8f0
platform_drv_probe+0x50/0xa8
really_probe+0x108/0x370
driver_probe_device+0x54/0xb8
__device_attach_driver+0x90/0xc0
bus_for_each_drv+0x70/0xc8
__device_attach+0xdc/0x140
device_initial_probe+0x10/0x18
bus_probe_device+0x94/0xa0
deferred_probe_work_func+0x70/0xa8
process_one_work+0x2a8/0x718
worker_thread+0x48/0x470
kthread+0x134/0x160
ret_from_fork+0x10/0x1c
Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00)
---[ end trace ccf721c9400ddbd6 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Convert the Renesas CPG DIV6 Clock Device Tree binding documentation to
json-schema.
Drop R-Car Gen2 compatible values, which were obsoleted by the unified
"Renesas Clock Pulse Generator / Module Standby and Software Reset" DT
bindings.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200507075026.31941-1-geert+renesas@glider.be
On SoCs with Standby Control Registers (STBCRs) instead of Module Stop
Control Registers (MSTPCRs), the suspend handler saves the wrong
registers, and the resume handler prints the wrong register in an error
message.
Fortunately this cannot happen yet, as the suspend/resume code is used
on PSCI systems only, and systems with STBCRs (RZ/A1 and RZ/A2) do not
use PSCI. Still, it is better to fix this, to avoid this becoming a
problem in the future.
Distinguish between STBCRs and MSTPCRs where needed. Replace the
useless printing of the virtual register address in the resume error
message by printing the register index.
Fixes: fde35c9c7d ("clk: renesas: cpg-mssr: Add R7S9210 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200507074713.30113-1-geert+renesas@glider.be
* Meson8b: Updates and fixup HDMI and video clocks
* Meson8b: Fixup reset polarity
* Meson gx and g12: fix GPU glitch free mux switch
-----BEGIN PGP SIGNATURE-----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=9+gg
-----END PGP SIGNATURE-----
Merge tag 'clk-meson-v5.8-1' of https://github.com/BayLibre/clk-meson into clk-amlogic
Pull Amlogic clk driver updates from Jerome Brunet:
- Meson8b: Updates and fixup HDMI and video clocks
- Meson8b: Fixup reset polarity
- Meson gx and g12: fix GPU glitch free mux switch
* tag 'clk-meson-v5.8-1' of https://github.com/BayLibre/clk-meson:
clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
clk: meson: meson8b: Make the CCF use the glitch-free VPU mux
clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
clk: meson: meson8b: Fix the polarity of the RESET_N lines
clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
clk: meson: g12a: Prepare the GPU clock tree to change at runtime
clk: meson: gxbb: Prepare the GPU clock tree to change at runtime
clk: meson: meson8b: make the hdmi_sys clock tree mutable
clk: meson8b: export the HDMI system clock
This clock entry does not exist on any other devices except DRA76,
so mark it as specific to that SoC only.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200430083640.8621-3-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
gpu_cm:* parent clock name is wrong, replace this with correct
gpu-clkctrl:* clock. Otherwise the clock ends up in the orphaned list.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200430083640.8621-2-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
L4 secure clocks do not have their parents set currently, which ends
them up to the orphan clock list. Fix this by adding either l3 or l4
clock as their parent.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200429131341.4697-4-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
L4 secure clocks do not have their parents set currently, which ends
them up to the orphan clock list. Fix this by adding either l3 or l4
clock as their parent.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200429131341.4697-3-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The parent_names is never released for a component clock definition,
causing some memory leak. Fix by releasing it once it is no longer
needed.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The proper name for CLK_SMMU_FIMCL3 is "smmu_fimcl3". Remove obvious
typo.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
The TOP 'aclk*_isp', 'aclk550_cam', 'gscl_wa' and 'gscl_wb' clocks must
be kept enabled all the time to allow proper access to power management
control for the ISP and CAM power domains. The last two clocks, although
related to GScaler device and GSCL power domain, provides also the
I_WRAP_CLK signal to MIPI CSIS0/1 devices, which are a part of CAM power
domain and are needed for proper power on/off sequence.
Currently there are no drivers for the devices, which are part of CAM and
ISP power domains yet. This patch only fixes the race between disabling
the unused power domains and disabling unused clocks, which randomly
resulted in the following error during boot:
Power domain CAM disable failed
Power domain ISP disable failed
Fixes: 318fa46cc6 ("clk/samsung: exynos542x: mark some clocks as critical")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
The implementation of 'struct clk' is not really an architectual detail
anymore now that most architectures have migrated to the common clk
framework. To sway new architecture ports away from trying to implement
their own 'struct clk', move the config next to the common clk framework
config.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200409064416.83340-11-sboyd@kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
This include isn't used by this file, so just remove it.
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: <linux-mips@vger.kernel.org>
Cc: <chenhc@lemote.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20200409064416.83340-10-sboyd@kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
