Commit graph

1,190,157 commits

Author SHA1 Message Date
Christophe Leroy
cb40dc25bd powerpc/radix: Move some functions into #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
[ Upstream commit 4a9dd8f292 ]

With skiboot_defconfig, Clang reports:

  CC      arch/powerpc/mm/book3s64/radix_tlb.o
arch/powerpc/mm/book3s64/radix_tlb.c:419:20: error: unused function '_tlbie_pid_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
                   ^
arch/powerpc/mm/book3s64/radix_tlb.c:663:20: error: unused function '_tlbie_va_range_lpid' [-Werror,-Wunused-function]
static inline void _tlbie_va_range_lpid(unsigned long start, unsigned long end,
                   ^

This is because those functions are only called from functions
enclosed in a #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE

Move below functions inside that #ifdef
* __tlbie_pid_lpid(unsigned long pid,
* __tlbie_va_lpid(unsigned long va, unsigned long pid,
* fixup_tlbie_pid_lpid(unsigned long pid, unsigned long lpid)
* _tlbie_pid_lpid(unsigned long pid, unsigned long lpid,
* fixup_tlbie_va_range_lpid(unsigned long va,
* __tlbie_va_range_lpid(unsigned long start, unsigned long end,
* _tlbie_va_range_lpid(unsigned long start, unsigned long end,

Fixes: f0c6fbbb90 ("KVM: PPC: Book3S HV: Add support for H_RPT_INVALIDATE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307260802.Mjr99P5O-lkp@intel.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3d72efd39f986ee939d068af69fdce28bd600766.1691568093.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Ahmad Fatoum
76c86b61b2 clk: imx: composite-8m: fix clock pauses when set_rate would be a no-op
[ Upstream commit 4dd432d985 ]

Reconfiguring the clock divider to the exact same value is observed
on an i.MX8MN to often cause a longer than usual clock pause, probably
because the divider restarts counting whenever the register is rewritten.

This issue doesn't show up normally, because the clock framework will
take care to not call set_rate when the clock rate is the same.
However, when we reconfigure an upstream clock, the common code will
call set_rate with the newly calculated rate on all children, e.g.:

  - sai5 is running normally and divides Audio PLL out by 16.
  - Audio PLL rate is increased by 32Hz (glitch-free kdiv change)
  - rates for children are recalculated and rates are set recursively
  - imx8m_clk_composite_divider_set_rate(sai5) is called with
    32/16 = 2Hz more
  - imx8m_clk_composite_divider_set_rate computes same divider as before
  - divider register is written, so it restarts counting from zero and
    MCLK is briefly paused, so instead of e.g. 40ns, MCLK is low for 120ns.

Some external clock consumers can be upset by such unexpected clock pauses,
so let's make sure we only rewrite the divider value when the value to be
written is actually different.

Fixes: d3ff972813 ("clk: imx: Add imx composite clock")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230807082201.2332746-1-a.fatoum@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Marco Felsch
d5e3298767 clk: imx8mp: fix sai4 clock
[ Upstream commit c30f600f1f ]

The reference manual don't mention a SAI4 hardware block. This would be
clock slice 78 which is skipped (TRM, page 237). Remove any reference to
this clock to align the driver with the reality.

Fixes: 9c140d9926 ("clk: imx: Add support for i.MX8MP clock driver")
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20230731142150.3186650-1-m.felsch@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Peng Fan
4c67637f9c clk: imx: imx8ulp: update SPLL2 type
[ Upstream commit 7653a59be8 ]

The SPLL2 on iMX8ULP is different with other frac PLLs, it can
support VCO from 650Mhz to 1Ghz. Following the changes to pllv4,
use the new type IMX_PLLV4_IMX8ULP_1GHZ.

Fixes: c43a801a57 ("clk: imx: Add clock driver for imx8ulp")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230625123340.4067536-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Ye Li
0310de64b3 clk: imx: pllv4: Fix SPLL2 MULT range
[ Upstream commit 3f0cdb9454 ]

The SPLL2 on iMX8ULP is different with other frac PLLs, it can
support VCO from 650Mhz to 1Ghz. According to RM, the MULT is
using a range from 27 to 54, not some fixed values. If using
current PLL implementation, some clock rate can't be supported.

Fix the issue by adding new type for the SPLL2 and use MULT range
to replace MULT table

Fixes: 5f0601c47c ("clk: imx: Update the pllv4 to support imx8ulp")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230625123340.4067536-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Imran Shaik
40fe937de6 clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock
[ Upstream commit 06d71fa10f ]

gcc_gpll1_out_even clock is referenced as a parent, but not registered
with the clock framework. Hence add support to register the same.

Fixes: 1c9efb0bc0 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-5-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Imran Shaik
88c80af75c dt-bindings: clock: Update GCC clocks for QDU1000 and QRU1000 SoCs
[ Upstream commit df873243b2 ]

Add support for GCC_GPLL1_OUT_EVEN and GCC_DDRSS_ECPRI_GSI_CLK clock
bindings for QDU1000 and QRU1000 SoCs. While at it, update the
maintainers list.

Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-2-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 06d71fa10f ("clk: qcom: gcc-qdu1000: Register gcc_gpll1_out_even clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Imran Shaik
ee6966bb24 clk: qcom: gcc-qdu1000: Fix clkref clocks handling
[ Upstream commit 2524dae5cd ]

Update the GCC clkref clock's halt_check to BRANCH_HALT, as it's
status bit is not inverted in the latest hardware version of QDU1000
and QRU1000 SoCs. While at it, fix the gcc clkref clock ops as well.

Fixes: 1c9efb0bc0 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-4-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Imran Shaik
84fbbb177d clk: qcom: gcc-qdu1000: Fix gcc_pcie_0_pipe_clk_src clock handling
[ Upstream commit b311f5d3c4 ]

Fix the gcc pcie pipe clock handling as per the clk_regmap_phy_mux_ops
implementation to let the clock framework automatically park the clock
at XO when the clock is switched off and restore the parent when the
clock is switched on.

Fixes: 1c9efb0bc0 ("clk: qcom: Add QDU1000 and QRU1000 GCC support")
Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-3-quic_imrashai@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Konrad Dybcio
cbfd73886e clk: qcom: gcc-sm8450: Use floor ops for SDCC RCGs
[ Upstream commit a27ac3806b ]

Use the floor ops to prevent warnings like this at suspend exit and boot:

mmc0: Card appears overclocked; req 800000 Hz, actual 25000000 Hz

Fixes: db0c944ee9 ("clk: qcom: Add clock driver for SM8450")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230811-topic-8450_clk-v1-1-88031478d548@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Ilpo Järvinen
49a9ac8270 PCI/ASPM: Use RMW accessors for changing LNKCTL
[ Upstream commit e09060b3b6 ]

Don't assume that the device is fully under the control of ASPM and use RMW
capability accessors which do proper locking to avoid losing concurrent
updates to the register values.

If configuration fails in pcie_aspm_configure_common_clock(), the
function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store
only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather
than the content of the whole LNKCTL registers. It aligns better with
how pcie_lnkctl_clear_and_set() expects its parameter and makes the
code more obvious to understand.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 2a42d9dba7 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch")
Fixes: 7d715a6c1a ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Ilpo Järvinen
9d31c101cc PCI: pciehp: Use RMW accessors for changing LNKCTL
[ Upstream commit 5f75f96c61 ]

As hotplug is not the only driver touching LNKCTL, use the RMW capability
accessor which handles concurrent changes correctly.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7f822999e1 ("PCI: pciehp: Add Disable/enable link functions")
Link: https://lore.kernel.org/r/20230717120503.15276-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Ilpo Järvinen
df666f2176 PCI: Add locking to RMW PCI Express Capability Register accessors
[ Upstream commit 5e70d0acf0 ]

Many places in the kernel write the Link Control and Root Control PCI
Express Capability Registers without proper concurrency control and this
could result in losing the changes one of the writers intended to make.

Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect
bit changes made in the RMW capability accessors. Protect only a selected
set of registers by differentiating the RMW accessor internally to
locked/unlocked variants using a wrapper which has the same signature as
pcie_capability_clear_and_set_word(). As the Capability Register (pos)
given to the wrapper is always a constant, the compiler should be able to
simplify all the dead-code away.

So far only the Link Control Register (ASPM, hotplug, link retraining,
various drivers) and the Root Control Register (AER & PME) seem to
require RMW locking.

Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: c7f486567c ("PCI PM: PCIe PME root port service driver")
Fixes: f12eb72a26 ("PCI/ASPM: Use PCI Express Capability accessors")
Fixes: 7d715a6c1a ("PCI: add PCI Express ASPM support")
Fixes: affa48de84 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM")
Fixes: 849a9366cb ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC")
Fixes: 3d1e7aa80d ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL")
Fixes: c0e5f4e73a ("misc: rtsx: Add support for RTS5261")
Fixes: 3df4fce739 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG")
Fixes: 121e9c6b5c ("misc: rtsx: modify and fix init_hw function")
Fixes: 19f3bd548f ("mfd: rtsx: Remove LCTLR defination")
Fixes: 773ccdfd9c ("mfd: rtsx: Read vendor setting from config space")
Fixes: 8275b77a15 ("mfd: rts5249: Add support for RTS5250S power saving")
Fixes: 5da4e04ae4 ("misc: rtsx: Add support for RTS5260")
Fixes: 0f49bfbd0f ("tg3: Use PCI Express Capability accessors")
Fixes: 5e7dfd0fb9 ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ")
Fixes: b726e493e8 ("r8169: sync existing 8168 device hardware start sequences with vendor driver")
Fixes: e6de30d63e ("r8169: more 8168dp support.")
Fixes: 8a06127602 ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards")
Fixes: 6f461f6c7c ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata")
Fixes: 1eae4eb2a1 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants")
Fixes: 8060e169e0 ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue")
Fixes: 69ce674bfa ("ath9k: do btcoex ASPM disabling at initialization time")
Fixes: f37f055035 ("mt76: mt76x2e: disable pcie_aspm by default")
Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:22 +02:00
Claudiu Beznea
754bccefd6 pinctrl: mcp23s08: check return value of devm_kasprintf()
[ Upstream commit f941714a7c ]

devm_kasprintf() returns a pointer to dynamically allocated memory.
Pointer could be NULL in case allocation fails. Check pointer validity.
Identified with coccinelle (kmerr.cocci script).

Fixes: 0f04a81784 ("pinctrl: mcp23s08: Split to three parts: core, I²C, SPI")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230621100409.1608395-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Wu Zongyong
7da44f84c4 PCI: Mark NVIDIA T4 GPUs to avoid bus reset
[ Upstream commit d5af729dc2 ]

NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card
is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs
PCI_DEV_FLAGS_NO_BUS_RESET.

Fixes: 4c207e7121 ("PCI: Mark some NVIDIA GPUs to avoid bus reset")
Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Daire McNamara
5183cbfbdd PCI: microchip: Correct the DED and SEC interrupt bit offsets
[ Upstream commit 6d473a5a26 ]

The SEC and DED interrupt bits are laid out the wrong way round so the SEC
interrupt handler attempts to mask, unmask, and clear the DED interrupt
and vice versa. Correct the bit offsets so that each interrupt handler
operates properly.

Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Luca Weiss
ab600f5aab clk: qcom: gcc-sm6350: Fix gcc_sdcc2_apps_clk_src
[ Upstream commit df04d166d1 ]

GPLL7 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230804-sm6350-sdcc2-v1-1-3d946927d37d@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Konrad Dybcio
f9917b02df clk: qcom: reset: Use the correct type of sleep/delay based on length
[ Upstream commit 181b66ee7c ]

Use the fsleep() helper that (based on the length of the delay, see: [1])
chooses the correct sleep/delay functions.

[1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt

Fixes: 2cb8a39b67 ("clk: qcom: reset: Allow specifying custom reset delay")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230726-topic-qcom_reset-v3-1-5958facd5db2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Dmitry Torokhov
1e54beadc5 kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
[ Upstream commit 9e0f4f2918 ]

kvm_vfio_group_add() creates kvg instance, links it to kv->group_list,
and calls kvm_vfio_file_set_kvm() with kvg->file as an argument after
dropping kv->lock. If we race group addition and deletion calls, kvg
instance may get freed by the time we get around to calling
kvm_vfio_file_set_kvm().

Previous iterations of the code did not reference kvg->file outside of
the critical section, but used a temporary variable. Still, they had
similar problem of the file reference being owned by kvg structure and
potential for kvm_vfio_group_del() dropping it before
kvm_vfio_group_add() had a chance to complete.

Fix this by moving call to kvm_vfio_file_set_kvm() under the protection
of kv->lock. We already call it while holding the same lock when vfio
group is being deleted, so it should be safe here as well.

Fixes: 2fc1bec158 ("kvm: set/clear kvm to/from vfio_group when group add/delete")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20230714224538.404793-1-dmitry.torokhov@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Yi Liu
7af1006a6d kvm/vfio: Prepare for accepting vfio device fd
[ Upstream commit 2f99073a72 ]

This renames kvm_vfio_group related helpers to prepare for accepting
vfio device fd. No functional change is intended.

Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yanting Jiang <yanting.jiang@intel.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20230718135551.6592-5-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Stable-dep-of: 9e0f4f2918 ("kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Patrick Whewell
1cb17fd8ef clk: qcom: gcc-sm8250: Fix gcc_sdcc2_apps_clk_src
[ Upstream commit 783cb69382 ]

GPLL9 is not on by default, which causes a "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error when booting. Set .flags =
CLK_OPS_PARENT_ENABLE to fix the error.

Fixes: 3e5770921a ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Patrick Whewell <patrick.whewell@sightlineapplications.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230802210359.408-1-patrick.whewell@sightlineapplications.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Kemeng Shi
f168ffe467 ext4: avoid potential data overflow in next_linear_group
[ Upstream commit 60c672b7f2 ]

ngroups is ext4_group_t (unsigned int) while next_linear_group treat it
in int. If ngroups is bigger than max number described by int, it will
be treat as a negative number. Then "return group + 1 >= ngroups ? 0 :
group + 1;" may keep returning 0.
Switch int to ext4_group_t in next_linear_group to fix the overflow.

Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Kemeng Shi
83a9d5f5ec ext4: correct grp validation in ext4_mb_good_group
[ Upstream commit a9ce5993a0 ]

Group corruption check will access memory of grp and will trigger kernel
crash if grp is NULL. So do NULL check before corruption check.

Fixes: 5354b2af34 ("ext4: allow ext4_get_group_info() to fail")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230801143204.2284343-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Qiuxu Zhuo
cfc5b2ad57 EDAC/igen6: Fix the issue of no error events
[ Upstream commit ce53ad81ed ]

Current igen6_edac checks for pending errors before the registration
of the error handler. However, there is a possibility that the error
occurs during the registration process, leading to unhandled pending
errors and no future error events. This issue can be reproduced by
repeatedly injecting errors during the loading of the igen6_edac.

Fix this issue by moving the pending error handler after the registration
of the error handler, ensuring that no pending errors are left unhandled.

Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Reported-by: Ee Wey Lim <ee.wey.lim@intel.com>
Tested-by: Ee Wey Lim <ee.wey.lim@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230725080427.23883-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
David Wronek
5c38369591 clk: qcom: gcc-sc7180: Fix up gcc_sdcc2_apps_clk_src
[ Upstream commit fd0b5ba87a ]

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: 17269568f7 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230723190725.1619193-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Zhang Jianhua
c2362ea892 clk: sunxi-ng: Modify mismatched function name
[ Upstream commit 075d9ca5b4 ]

No functional modification involved.

drivers/clk/sunxi-ng/ccu_mmc_timing.c:54: warning: expecting prototype for sunxi_ccu_set_mmc_timing_mode(). Prototype was for sunxi_ccu_get_mmc_timing_mode() instead

Fixes: f6f64ed868 ("clk: sunxi-ng: Add interface to query or configure MMC timing modes.")
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230722153107.2078179-1-chris.zjh@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:21 +02:00
Konrad Dybcio
f3ad747e9d clk: qcom: dispcc-sc8280xp: Use ret registers on GDSCs
[ Upstream commit 20e1d75bc0 ]

The DISP_CC GDSCs have not been instructed to use the ret registers.
Fix that.

Fixes: 4a66e76fdb ("clk: qcom: Add SC8280XP display clock controller")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230725-topic-8280_dispcc_gdsc-v1-1-236590060531@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Ira Weiny
c4f9c0a3a6 PCI/DOE: Fix destroy_work_on_stack() race
[ Upstream commit e3a3a097ea ]

The following debug object splat was observed in testing:

  ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510
  WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0
  ...
  Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work
  RIP: 0010:debug_print_object+0x7d/0xb0
  ...
  Call Trace:
   ? debug_print_object+0x7d/0xb0
   ? __pfx_doe_statemachine_work+0x10/0x10
   debug_object_free.part.0+0x11b/0x150
   doe_statemachine_work+0x45e/0x510
   process_one_work+0x1d4/0x3c0

This occurs because destroy_work_on_stack() was called after signaling
the completion in the calling thread.  This creates a race between
destroy_work_on_stack() and the task->work struct going out of scope in
pci_doe().

Signal the work complete after destroying the work struct.  This is safe
because signal_task_complete() is the final thing the work item does and
the workqueue code is careful not to access the work struct after.

Fixes: abf04be0e7 ("PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y")
Link: https://lore.kernel.org/r/20230726-doe-fix-v1-1-af07e614d4dd@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Jason Gunthorpe
727a2c1402 iommufd: Fix locking around hwpt allocation
[ Upstream commit 31422dff18 ]

Due to the auto_domains mechanism the ioas->mutex must be held until
the hwpt is completely setup by iommufd_object_abort_and_destroy() or
iommufd_object_finalize().

This prevents a concurrent iommufd_device_auto_get_domain() from seeing
an incompletely initialized object through the ioas->hwpt_list.

To make this more consistent move the unlock until after finalize.

Fixes: e8d5721003 ("iommufd: Add kAPI toward external drivers for physical devices")
Link: https://lore.kernel.org/r/11-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Qiuxu Zhuo
68389f0c4a EDAC/i10nm: Skip the absent memory controllers
[ Upstream commit c545f5e412 ]

Some Sapphire Rapids workstations' absent memory controllers
still appear as PCIe devices that fool the i10nm_edac driver
and result in "shift exponent -66 is negative" call traces
from skx_get_dimm_info().

Skip the absent memory controllers to avoid the call traces.

Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://lore.kernel.org/linux-edac/CAAd53p41Ku1m1rapeqb1xtD+kKuk+BaUW=dumuoF0ZO3GhFjFA@mail.gmail.com/T/#m5de16dce60a8c836ec235868c7c16e3fefad0cc2
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Closes: https://lore.kernel.org/linux-edac/SA1PR11MB71305B71CCCC3D9305835202892AA@SA1PR11MB7130.namprd11.prod.outlook.com/T/#t
Tested-by: Koba Ko <koba.ko@canonical.com>
Fixes: d4dc89d069 ("EDAC, i10nm: Add a driver for Intel 10nm server processors")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230710013232.59712-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Minjie Du
f35e506eda drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
[ Upstream commit a995c50db8 ]

The function clk_register_pll() may return NULL or an ERR_PTR. Don't
treat an ERR_PTR as valid.

Signed-off-by: Minjie Du <duminjie@vivo.com>
Link: https://lore.kernel.org/r/20230712102246.10348-1-duminjie@vivo.com
Fixes: b9e0d40c0d ("clk: keystone: add Keystone PLL clock driver")
[sboyd@kernel.org: Reword commit text]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Manivannan Sadhasivam
ef2757b1ea PCI: qcom-ep: Switch MHI bus master clock off during L1SS
[ Upstream commit b9cbc06049 ]

Currently, as part of the qcom_pcie_perst_deassert() function, instead
of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable
"val" is re-read.

This must be fixed to ensure that the master clock supplied to the MHI
bus is correctly gated during L1.1/L1.2 to save power.

Thus, replace the line that re-reads "val" with a line that writes the
updated value to the register to clear PARF_MSTR_AXI_CLK_EN.

[kwilczynski: commit log]
Fixes: c457ac029e ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS")
Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org
Reported-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Sven Peter
b1b0ddd5bf PCI: apple: Initialize pcie->nvecs before use
[ Upstream commit d8650c0c2a ]

The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set
up the number of MSIs available for each port. However, it's called
before apple_msi_init(), which initializes pcie->nvecs.

Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such,
initialized as zero. ilog2(0) happens to be 0xffffffff which then simply
configures more MSIs in hardware than we have. This doesn't break
anything because we never hand out those vectors.

Thus, swap the order of the two calls so that the correctly initialized
value is then used.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230311133453.63246-1-sven@svenpeter.dev
Fixes: 476c41ed45 ("PCI: apple: Implement MSI support")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Alibek Omarov
b0783c17ff clk: rockchip: rk3568: Fix PLL rate setting for 78.75MHz
[ Upstream commit dafebd0f9a ]

PLL rate on RK356x is calculated through the simple formula:
((24000000 / _refdiv) * _fbdiv) / (_postdiv1 * _postdiv2)

The PLL rate setting for 78.75MHz seems to be copied from 96MHz
so this patch fixes it and configures it properly.

Signed-off-by: Alibek Omarov <a1ba.omarov@gmail.com>
Fixes: 842f4cb726 ("clk: rockchip: Add more PLL rates for rk3568")
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230614134750.1056293-1-a1ba.omarov@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Danila Tikhonov
e00980fb2f clk: qcom: gcc-sm7150: Add CLK_OPS_PARENT_ENABLE to sdcc2 rcg
[ Upstream commit ff19022b91 ]

Set .flags = CLK_OPS_PARENT_ENABLE to fix "gcc_sdcc2_apps_clk_src: rcg
didn't update its configuration" error.

Fixes: a808d58ddf ("clk: qcom: Add Global Clock Controller (GCC) driver for SM7150")
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230630191944.20282-1-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Konrad Dybcio
5f487953fe clk: qcom: gcc-sc8280xp: Add missing GDSCs
[ Upstream commit 4712eb7ff8 ]

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: d65d005f9a ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-3-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Konrad Dybcio
ea4eceef16 dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs
[ Upstream commit 9eba4db02a ]

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: a66a82f2a5 ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Konrad Dybcio
e065dc3155 clk: qcom: gcc-sc8280xp: Add missing GDSC flags
[ Upstream commit 2fd02de270 ]

All of the 8280's GCC GDSCs can and should use the retain registers so
as not to lose their state when entering lower power modes.

Fixes: d65d005f9a ("clk: qcom: add sc8280xp GCC driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-1-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Konrad Dybcio
3764722d97 clk: qcom: gpucc-sm6350: Fix clock source names
[ Upstream commit 743913b343 ]

fw_name for GCC inputs didn't match the bindings. Fix it.

Fixes: 013804a727 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-2-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:20 +02:00
Konrad Dybcio
fc242b27ab clk: qcom: gpucc-sm6350: Introduce index-based clk lookup
[ Upstream commit f6f89d194e ]

Add the nowadays-prefered and marginally faster way of looking up parent
clocks in the device tree. It also allows for clock-names-independent
operation, so long as the order (which is enforced by schema) is kept.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-1-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 743913b343 ("clk: qcom: gpucc-sm6350: Fix clock source names")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Corey Minyard
7db16d2e79 ipmi:ssif: Fix a memory leak when scanning for an adapter
[ Upstream commit b8d72e32e1 ]

The adapter scan ssif_info_find() sets info->adapter_name if the adapter
info came from SMBIOS, as it's not set in that case.  However, this
function can be called more than once, and it will leak the adapter name
if it had already been set.  So check for NULL before setting it.

Fixes: c4436c9149 ("ipmi_ssif: avoid registering duplicate ssif interface")
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Jiasheng Jiang
2959a03cb7 ipmi:ssif: Add check for kstrdup
[ Upstream commit c5586d0f71 ]

Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference.

Fixes: c4436c9149 ("ipmi_ssif: avoid registering duplicate ssif interface")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Message-Id: <20230619092802.35384-1-jiasheng@iscas.ac.cn>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Su Hui
3639535d3d ALSA: ac97: Fix possible error value of *rac97
[ Upstream commit 67de40c9df ]

Before committing 79597c8bf6, *rac97 always be NULL if there is
an error. When error happens, make sure *rac97 is NULL is safer.

For examble, in snd_vortex_mixer():
	err = snd_ac97_mixer(pbus, &ac97, &vortex->codec);
	vortex->isquad = ((vortex->codec == NULL) ?
		0 : (vortex->codec->ext_id&0x80));
If error happened but vortex->codec isn't NULL, this may cause some
problems.

Move the judgement order to be clearer and better.

Fixes: 79597c8bf6 ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Geert Uytterhoeven
7287ad1236 of: unittest: Fix overlay type in apply/revert check
[ Upstream commit 6becf8f845 ]

The removal check in of_unittest_apply_revert_overlay_check()
always uses the platform device overlay type, while it should use the
actual overlay type, as passed as a parameter to the function.

This has no impact on any current test, as all tests calling
of_unittest_apply_revert_overlay_check() use the platform device overlay
type.

Fixes: d5e75500ca ("of: unitest: Add I2C overlay unit tests.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ba0234c41ba808f10112094f88792beeb6dbaedf.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Geert Uytterhoeven
be86241bf5 of: overlay: Call of_changeset_init() early
[ Upstream commit a9515ff4fb ]

When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state.

However, of_overlay_apply() calls of_resolve_phandles() before
init_overlay_changeset().  Hence if the overlay fails to apply due to an
unresolved symbol, the overlay_changeset.cset.entries list is still
uninitialized, and cleanup will crash with a NULL-pointer dereference in
overlay_removal_is_ok().

Fix this by moving the call to of_changeset_init() from
init_overlay_changeset() to of_overlay_fdt_apply(), where all other
early initialization is done.

Fixes: f948d6d8b7 ("of: overlay: avoid race condition between applying multiple overlays")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/4f1d6d74b61cba2599026adb6d1948ae559ce91f.1690533838.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Vijendar Mukunda
70bd7f65d3 ASoC: SOF: amd: clear dsp to host interrupt status
[ Upstream commit 38592ae6dc ]

DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.

when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.

Fixes: 2e7c6652f9 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")

Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
David Jeffery
293c2dd9ed md: raid0: account for split bio in iostat accounting
[ Upstream commit cc22b5407e ]

When a bio is split by md raid0, the newly created bio will not be tracked
by md for I/O accounting. Only the portion of I/O still assigned to the
original bio which was reduced by the split will be accounted for. This
results in md iostat data sometimes showing I/O values far below the actual
amount of data being sent through md.

md_account_bio() needs to be called for all bio generated by the bio split.

A simple example of the issue was generated using a raid0 device on partitions
to the same device. Since all raid0 I/O then goes to one device, it makes it
easy to see a gap between the md device and its sd storage. Reading an lvm
device on top of the md device, the iostat output (some 0 columns and extra
devices removed to make the data more compact) was:

Device             tps    kB_read/s    kB_wrtn/s    kB_dscd/s    kB_read
md2               0.00         0.00         0.00         0.00          0
sde               0.00         0.00         0.00         0.00          0
md2            1364.00    411496.00         0.00         0.00     411496
sde            1734.00    646144.00         0.00         0.00     646144
md2            1699.00    510680.00         0.00         0.00     510680
sde            2155.00    802784.00         0.00         0.00     802784
md2             803.00    241480.00         0.00         0.00     241480
sde            1016.00    377888.00         0.00         0.00     377888
md2               0.00         0.00         0.00         0.00          0
sde               0.00         0.00         0.00         0.00          0

I/O was generated doing large direct I/O reads (12M) with dd to a linear
lvm volume on top of the 4 leg raid0 device.

The md2 reads were showing as roughly 2/3 of the reads to the sde device
containing all of md2's raid partitions. The sum of reads to sde was
1826816 kB, which was the expected amount as it was the amount read by
dd. With the patch, the total reads from md will match the reads from
sde and be consistent with the amount of I/O generated.

Fixes: 10764815ff ("md: add io accounting for raid0 and raid5")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230816181433.13289-1-djeffery@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Jan Kara
f34142ab4e md/raid0: Fix performance regression for large sequential writes
[ Upstream commit 319ff40a54 ]

Commit f00d7c85be ("md/raid0: fix up bio splitting.") among other
things changed how bio that needs to be split is submitted. Before this
commit, we have split the bio, mapped and submitted each part. After
this commit, we map only the first part of the split bio and submit the
second part unmapped. Due to bio sorting in __submit_bio_noacct() this
results in the following request ordering:

  9,0   18     1181     0.525037895 15995  Q  WS 1479315464 + 63392

  Split off chunk-sized (1024 sectors) request:

  9,0   18     1182     0.629019647 15995  X  WS 1479315464 / 1479316488

  Request is unaligned to the chunk so it's split in
  raid0_make_request().  This is the first part mapped and punted to
  bio_list:

  8,0   18     7053     0.629020455 15995  A  WS 739921928 + 1016 <- (9,0) 1479315464

  Now raid0_make_request() returns, second part is postponed on
  bio_list. __submit_bio_noacct() resorts the bio_list, mapped request
  is submitted to the underlying device:

  8,0   18     7054     0.629022782 15995  G  WS 739921928 + 1016

  Now we take another request from the bio_list which is the remainder
  of the original huge request. Split off another chunk-sized bit from
  it and the situation repeats:

  9,0   18     1183     0.629024499 15995  X  WS 1479316488 / 1479317512
  8,16  18     6998     0.629025110 15995  A  WS 739921928 + 1016 <- (9,0) 1479316488
  8,16  18     6999     0.629026728 15995  G  WS 739921928 + 1016
  ...
  9,0   18     1184     0.629032940 15995  X  WS 1479317512 / 1479318536 [libnetacq-write]
  8,0   18     7059     0.629033294 15995  A  WS 739922952 + 1016 <- (9,0) 1479317512
  8,0   18     7060     0.629033902 15995  G  WS 739922952 + 1016
  ...

  This repeats until we consume the whole original huge request. Now we
  finally get to processing the second parts of the split off requests
  (in reverse order):

  8,16  18     7181     0.629161384 15995  A  WS 739952640 + 8 <- (9,0) 1479377920
  8,0   18     7239     0.629162140 15995  A  WS 739952640 + 8 <- (9,0) 1479376896
  8,16  18     7186     0.629163881 15995  A  WS 739951616 + 8 <- (9,0) 1479375872
  8,0   18     7242     0.629164421 15995  A  WS 739951616 + 8 <- (9,0) 1479374848
  ...

I guess it is obvious that this IO pattern is extremely inefficient way
to perform sequential IO. It also makes bio_list to grow to rather long
lengths.

Change raid0_make_request() to map both parts of the split bio. Since we
know we are provided with at most chunk-sized bios, we will always need
to split the incoming bio at most once.

Fixes: f00d7c85be ("md/raid0: fix up bio splitting.")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-2-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Jan Kara
af006dbb38 md/raid0: Factor out helper for mapping and submitting a bio
[ Upstream commit af50e20afb ]

Factor out helper function for mapping and submitting a bio out of
raid0_make_request(). We will use it later for submitting both parts of
a split bio.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-1-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 319ff40a54 ("md/raid0: Fix performance regression for large sequential writes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00
Tejun Heo
e39ef7880d blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
[ Upstream commit ec14a87ee1 ]

blk-iocost sometimes causes the following crash:

  BUG: kernel NULL pointer dereference, address: 00000000000000e0
  ...
  RIP: 0010:_raw_spin_lock+0x17/0x30
  Code: be 01 02 00 00 e8 79 38 39 ff 31 d2 89 d0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 65 ff 05 48 d0 34 7e b9 01 00 00 00 31 c0 <f0> 0f b1 0f 75 02 5d c3 89 c6 e8 ea 04 00 00 5d c3 0f 1f 84 00 00
  RSP: 0018:ffffc900023b3d40 EFLAGS: 00010046
  RAX: 0000000000000000 RBX: 00000000000000e0 RCX: 0000000000000001
  RDX: ffffc900023b3d20 RSI: ffffc900023b3cf0 RDI: 00000000000000e0
  RBP: ffffc900023b3d40 R08: ffffc900023b3c10 R09: 0000000000000003
  R10: 0000000000000064 R11: 000000000000000a R12: ffff888102337000
  R13: fffffffffffffff2 R14: ffff88810af408c8 R15: ffff8881070c3600
  FS:  00007faaaf364fc0(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000e0 CR3: 00000001097b1000 CR4: 0000000000350ea0
  Call Trace:
   <TASK>
   ioc_weight_write+0x13d/0x410
   cgroup_file_write+0x7a/0x130
   kernfs_fop_write_iter+0xf5/0x170
   vfs_write+0x298/0x370
   ksys_write+0x5f/0xb0
   __x64_sys_write+0x1b/0x20
   do_syscall_64+0x3d/0x80
   entry_SYSCALL_64_after_hwframe+0x46/0xb0

This happens because iocg->ioc is NULL. The field is initialized by
ioc_pd_init() and never cleared. The NULL deref is caused by
blkcg_activate_policy() installing blkg_policy_data before initializing it.

blkcg_activate_policy() was doing the following:

1. Allocate pd's for all existing blkg's and install them in blkg->pd[].
2. Initialize all pd's.
3. Online all pd's.

blkcg_activate_policy() only grabs the queue_lock and may release and
re-acquire the lock as allocation may need to sleep. ioc_weight_write()
grabs blkcg->lock and iterates all its blkg's. The two can race and if
ioc_weight_write() runs during #1 or between #1 and #2, it can encounter a
pd which is not initialized yet, leading to crash.

The crash can be reproduced with the following script:

  #!/bin/bash

  echo +io > /sys/fs/cgroup/cgroup.subtree_control
  systemd-run --unit touch-sda --scope dd if=/dev/sda of=/dev/null bs=1M count=1 iflag=direct
  echo 100 > /sys/fs/cgroup/system.slice/io.weight
  bash -c "echo '8:0 enable=1' > /sys/fs/cgroup/io.cost.qos" &
  sleep .2
  echo 100 > /sys/fs/cgroup/system.slice/io.weight

with the following patch applied:

> diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
> index fc49be622e05..38d671d5e10c 100644
> --- a/block/blk-cgroup.c
> +++ b/block/blk-cgroup.c
> @@ -1553,6 +1553,12 @@ int blkcg_activate_policy(struct gendisk *disk, const struct blkcg_policy *pol)
> 		pd->online = false;
> 	}
>
> +       if (system_state == SYSTEM_RUNNING) {
> +               spin_unlock_irq(&q->queue_lock);
> +               ssleep(1);
> +               spin_lock_irq(&q->queue_lock);
> +       }
> +
> 	/* all allocated, init in the same order */
> 	if (pol->pd_init_fn)
> 		list_for_each_entry_reverse(blkg, &q->blkg_list, q_node)

I don't see a reason why all pd's should be allocated, initialized and
onlined together. The only ordering requirement is that parent blkgs to be
initialized and onlined before children, which is guaranteed from the
walking order. Let's fix the bug by allocating, initializing and onlining pd
for each blkg and holding blkcg->lock over initialization and onlining. This
ensures that an installed blkg is always fully initialized and onlined
removing the the race window.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Breno Leitao <leitao@debian.org>
Fixes: 9d179b8654 ("blkcg: Fix multiple bugs in blkcg_activate_policy()")
Link: https://lore.kernel.org/r/ZN0p5_W-Q9mAHBVY@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13 09:48:19 +02:00