Add specific compatible strings to document the GPU SMMU present
in the Eliza SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/740962/
Message-ID: <20260718-eliza-gpu-v2-4-64379dbebd7a@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add support for Adreno A722, a member of the GEN1 A7xx family. It is
derived from A730 and shares the same IP-level configurations: HWCG
registers, protected registers, GBIF CX registers and gmu_cgc_mode.
Major differences include lower cache/core counts, 1MB GMEM, no
Concurrent Binning & LPAC support. Some of the peripheral blocks like
RSCC are from A740 that resulted in updates to RSC layout.
Add a new entry to the catalog to describe the usual configuration and
few additional fixup mainly due to missing CB/LPAC features and updated
RSC layout.
Signed-off-by: Puranam V G Tejaswi <puranam.tejaswi@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/740959/
Message-ID: <20260718-eliza-gpu-v2-3-64379dbebd7a@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The GBIF_CX_CONFIG register exists on GPUs prior to A8XX (it is used on
A722, for example), so it should be tagged as an A6XX variant to match
the register spec. Widen its variant range from "A8XX-" to "A6XX-" in the
register XML and rename the generated macro accordingly at all existing
usage sites.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/740957/
Message-ID: <20260718-eliza-gpu-v2-2-64379dbebd7a@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The RBBM_CLOCK_CNTL3_TP0 entry in a730_hwcg has bits[19:16] set to 2
(clock gating enabled for that TP0 stage). As per the latest
recommendation, clear this nibble to disable clock gating for this
particular stage.
Fixes: 9588d2f860 ("drm/msm/a6xx: Add A730 support")
Signed-off-by: Puranam V G Tejaswi <puranam.tejaswi@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/740955/
Message-ID: <20260718-eliza-gpu-v2-1-64379dbebd7a@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Add specific compatible strings to document the GPU SMMU present
in the Shikra SoC.
Signed-off-by: Bibek Kumar Patro <bibek.patro@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/738935/
Message-ID: <20260710-shikra-gpu-v6-3-b388ec5dce77@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Adreno A704 GPU found Shikra SoC is an IP reuse of A702 GPU with very
minimal changes.
Signed-off-by: Aditya Sherawat <asherawa@qti.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/738933/
Message-ID: <20260710-shikra-gpu-v6-2-b388ec5dce77@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Adreno A704 GPU found in Shikra is an IP reuse of A702 GPU with very
minimal changes. The only KMD facing difference is the chipid and the
zap firmware which is specified via devicetree.
Just add the new chipid to enable support for A704 GPU in Shikra.
Signed-off-by: Aditya Sherawat <asherawa@qti.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/738931/
Message-ID: <20260710-shikra-gpu-v6-1-b388ec5dce77@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Adreno 840 GPU found in Kaanapali chipsets belongs to the A8x family.
It is a new IP which features the new slice architecture with 3 slices,
raytracing support, and the highest GMEM size seen so far on a Snapdragon
mobile chipsets. Update the dt bindings documentation to describe this GPU.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/738143/
Message-ID: <20260707-kaana-gpu-dt-v3-1-8dac9a60dd5c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- blend: allow blend mode property without PREMULTI
- bridges:
- Rename drm_for_each_bridge_in_chain_scoped to
drm_for_each_bridge_in_chain
- Drop legacy bridges support
- gpusvm: Code reorganization to give drivers more flexibility
Driver Changes:
- etnaviv: Check if a reset has been successful
- nouveau: Create instmem iomapping at first use
- panthor: Remove redundant cleanup
- qxl: Convert to a simple encoder to a regular one
- bridges:
- Convert all remaining legacy bridges to atomic
- tc358767: clamp the reported AUX read size to the request
- panels:
- novatek-nt37801: Use mipi_dsi_*_multi() functions
- samsung-s6d16d0: Fix prepare error handling
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaliKpwAKCRAnX84Zoj2+
dn97AYChSha31PCyoicBWbLiovMuDLyZzq7plQz/xdaRI5H0Z5aT1DkDAqeGLl+t
QLeAXKoBfjBp6OtRA7gBjEfwZPFpud58WxEmni4dU8hdHBQ1JW1R2ximQlsq5Y/A
/DESpMRzHg==
=9oKX
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-07-16' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 7.3:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- blend: allow blend mode property without PREMULTI
- bridges:
- Rename drm_for_each_bridge_in_chain_scoped to
drm_for_each_bridge_in_chain
- Drop legacy bridges support
- gpusvm: Code reorganization to give drivers more flexibility
Driver Changes:
- etnaviv: Check if a reset has been successful
- nouveau: Create instmem iomapping at first use
- panthor: Remove redundant cleanup
- qxl: Convert to a simple encoder to a regular one
- bridges:
- Convert all remaining legacy bridges to atomic
- tc358767: clamp the reported AUX read size to the request
- panels:
- novatek-nt37801: Use mipi_dsi_*_multi() functions
- samsung-s6d16d0: Fix prepare error handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260716-famous-pastel-ostrich-a1aaef@houat
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: 1d8a5ca436 ("drm/msm: Conversion to drm scheduler")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/738905/
Message-ID: <20260709062309.4168362-1-ruoyuw560@gmail.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
get_pid_task() increments the task reference count, but the
corresponding put_task_struct() was missing in the else branch,
leaking a reference on every GPU hang recovery.
Fixes: 25654a1756 ("drm/msm: Update global fault counter when faulty process has already ended")
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/730662/
Message-ID: <20260605-assorted-fixes-june-v1-6-2caa04f7287c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Once a hang is triggered by the msm_recovery test, the gpu error irq
remains asserted and triggers an interrupt storm. In the worst case,
this IRQ storm lands on the CPU core where the hangcheck timer is
scheduled, blocking it from running. This eventually leads to CPU
watchdog timeouts.
To fix this, mask the gpu error irqs during msm_recovery test and
enable them back during the recovery.
Fixes: 5edf2750d9 ("drm/msm: Add debugfs to disable hw err handling")
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/730660/
Message-ID: <20260605-assorted-fixes-june-v1-5-2caa04f7287c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
A621 uses an incorrect GPUCC register list during state capture.
The existing list matches A623/A663. Rename it accordingly and add a
dedicated A621 GPUCC register list.
Fixes: 11cdb81b3c ("drm/msm/a6xx: Fix gpucc register block for A621")
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/730659/
Message-ID: <20260605-assorted-fixes-june-v1-4-2caa04f7287c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The GPUCC register list for A663 is incorrect, which can cause
out-of-bounds register access during GPU state capture.
Update it to use the correct register ranges.
Fixes: 5773cce861 ("drm/msm/a6xx: Add support for A663")
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/730656/
Message-ID: <20260605-assorted-fixes-june-v1-3-2caa04f7287c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
During recovery, it is not safe to retire the hung submit before we
recover the GPU. Retiring the submit triggers BO free and that can
result in GPU pagefaults since the GPU may be actively accessing those
BOs.
To fix this, retire the submits after gpu recovery is complete in
recover_worker().
Fixes: 1a370be9ac ("drm/msm: restart queued submits after hang")
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/730655/
Message-ID: <20260605-assorted-fixes-june-v1-2-2caa04f7287c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
There are stale RPMH votes (BCM votes) observed after GMU suspend. This
is because the rpmh stop sequences are skipped during gmu suspend. Fix
this and also move GMU to reset state to avoid any further activity.
Fixes: f248d5d515 ("drm/msm/a6xx: Fix PDC sleep sequence")
Signed-off-by: Shivam Rawat <shivrawa@qti.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/730652/
Message-ID: <20260605-assorted-fixes-june-v1-1-2caa04f7287c@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
A3xx hangs after every runtime suspend on the Samsung Galaxy S4
GT-I9505. Even simple GPU workloads, such as drawing a single triangle,
hang reliably once the GPU has been suspended by runtime PM.
The generic MSM GPU suspend path disables clocks/power, but A3xx also
needs to ensure that pending VBIF transactions are drained before that
happens.
Add an A3xx-specific pm_suspend callback. Wait for the GPU to become
idle, halt all VBIF XIN clients, wait for the corresponding
acknowledgment, and only then enter the generic MSM GPU suspend path.
This fixes reliable A3xx GPU hangs observed after runtime PM on the
Samsung Galaxy S4 GT-I9505, codename jflte. The failure is reported as:
mdp4 5100000.display-controller: [drm:hangcheck_handler] *ERROR* 3.2.0.2: hangcheck detected gpu lockup rb 0!
mdp4 5100000.display-controller: [drm:hangcheck_handler] *ERROR* 3.2.0.2: completed fence: 4294967041
mdp4 5100000.display-controller: [drm:hangcheck_handler] *ERROR* 3.2.0.2: submitted fence: 4294967049
mdp4 5100000.display-controller: [drm:recover_worker] *ERROR* 3.2.0.2: hangcheck recover!
Link: https://github.com/freedreno-zz/freedreno/issues/12
Signed-off-by: Alexandre MINETTE <contact@alex-min.fr>
Patchwork: https://patchwork.freedesktop.org/patch/731919/
Message-ID: <20260610-mainline-fix-a3xx-gpu-hang-sending-v1-1-9282182840b5@alex-min.fr>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
The a6xx_destroy() function frees "a6xx_gpu" and so "adreno_gpu" points
to freed memory. Preserve the error code before freeing the memory to
avoid a use after free.
Fixes: d158886cba ("drm/msm/adreno: Trust the SSoT UBWC config")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/732275/
Message-ID: <aiqNktNfXiaPhje3@stanley.mountain>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
tc_aux_transfer() clamps an AUX read to the payload limit:
size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
After the transfer it replaces size with the byte count the controller
reports in AUX_BYTES:
if (size)
size = FIELD_GET(AUX_BYTES, auxstatus);
AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it
back to the request. tc_aux_read_data() reads that many bytes into the
16-byte auxrdata stack buffer, then copies them into the caller buffer. A
reported count of 255 makes the read run to 256 bytes and overruns both.
The controller should never report more than it was asked to transfer, so
this is defense in depth rather than a live hole. The reported count is
only lightly trusted, and the check is cheap. Clamp it back to the request,
the same way ti-sn65dsi86 does in commit aca58eac52 ("drm/bridge:
ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer").
Fixes: 12dfe7c4d9 ("drm/bridge: tc358767: Use reported AUX transfer size")
Co-developed-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260701064440.1541418-1-maoyixie.tju@gmail.com
Implement the MES gang contex alloc and free heplers.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some AMD APU multi-function devices expose an integrated USB xHCI
controller. In some circumstances (such as larger VRAM), the PM core
can resume can fail when the xHCI controller is resuming in parallel
with the GPU/display function.
On affected systems, the xHCI controller can complete pci_pm_resume
and start resuming USB devices while the GPU is still in its much
longer resume path. This race condition leads to USB device resume
failures followed by:
xhci_hcd ...: xHCI host not responding to stop endpoint command
xhci_hcd ...: HC died; cleaning up
Create a device link from any xHCI controller sharing the same PCIe
root port as the APU display function. The link uses DL_FLAG_STATELESS
and DL_FLAG_PM_RUNTIME to ensure the GPU completes its resume before
the xHCI controller begins resuming USB devices.
This device link is done specifically in amdgpu so that if the
platform firmware has been modified such that this issue doesn't happen
the version can be detected and the workaround skipped.
Suggested-by: Aaron Ma <aaron.ma@canonical.com>
Reported-by: mrh@frame.work
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221073
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Alexander F <superveridical@gmail.com>
Tested-by: Francis DB <francisdb@gmail.com>
Link: https://patch.msgid.link/20260713195313.1739762-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN42B enables DML2 and DML21 by default and defines
dcn42b_prepare_mcache_programming(), but the resource function table only
wires the callback when CONFIG_DRM_AMD_DC_DML21 is defined.
There is no in-tree Kconfig symbol named DRM_AMD_DC_DML21, so the
preprocessor always removes the callback entry. Sibling DCN42 and DCN401
resource tables wire their prepare_mcache_programming callbacks
unconditionally, and the core DC code already checks whether the callback
pointer is present before calling it.
Remove the stale guard so DCN42B exposes the callback relation that its
source and DML21 build world already provide.
This is an RFC patch draft from static conditional callback legality
auditing. It needs AMD display maintainer review before submission as a
final fix.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In dm_update_crtc_state(), the skip_modeset path releases new_stream
via dc_stream_release() but does not set the pointer to NULL.
If a later error (e.g., color management failure) triggers the fail
label, the error path calls dc_stream_release() again on the same
dangling pointer, causing a double release and potential use-after-free.
Fix this by setting new_stream to NULL after the initial release.
Fixes: 9b690ef3c7 ("drm/amd/display: Avoid full modeset when not required")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
link_dp_irq_handler.c includes "link_dp_panel_replay.h" twice. Drop the
redundant second include; this is a non-functional cleanup flagged by
scripts/checkincludes.pl.
Fixes: 1e5cd4adfc ("drm/amd/display: move panel replay out from edp")
Signed-off-by: Anas Khan <anxkhn28@gmail.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dccg35_set_hdmistreamclk_src_new() updates HDMISTREAMCLK_CNTL but
passes DPSTREAMCLK0_SRC_SEL as the field identifier in the second
REG_UPDATE_2 slot.
The current behavior is harmless on DCN3.5 because both fields share the
same bit layout, but it is still incorrect and could break on future
hardware revisions.
Fixes: d36771a034 ("drm/amd/display: Add DCCG DIO, HPO, OPP, and OPTC support for FRL")
Signed-off-by: Dyllan Kobal <dyllan.kobal@zetier.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The final check of hubp for NULL covers all remaining lines of code, since
the value of hubp does not change until the end of the method.
This check is redundant because hubp1 is already dereferenced within the
macro.
If it were NULL, the program would have already failed to proceed.
Remove the left part of the expression with the logical "&&".
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: be1fb44389 ("drm/amd/display: Check null pointers before used").
Signed-off-by: Gleb Markov <markov.gi@npc-ksb.ru>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfree() safely handles NULL pointers, so there is no need to check for
NULL before calling kfree().
Remove redundant NULL check.
Found by Coccinelle ifnullfree script.
Signed-off-by: Ziran Zhang <zhangcoder@yeah.net>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The Lenovo Legion 5 15ARH05 (Renoir) ships a BOE 0x08DF eDP panel that
advertises AUX/DPCD backlight control, so amdgpu's automatic detection
(amdgpu_backlight == -1) selects AUX. On this panel the AUX backlight
path has no effect: brightness writes are accepted but the panel level
never changes, the display is stuck at a fixed brightness and
max_brightness is reported as a bogus 511000. As a result neither the
desktop brightness slider nor the brightness hotkeys do anything.
Forcing PWM backlight (amdgpu.backlight=0) restores working control:
max_brightness becomes 65535 and the level tracks writes. This has long
been applied by users as a manual kernel-parameter workaround.
Extend the generic panel backlight quirk with a force_pwm flag, add an
entry for the Legion 5 15ARH05 / BOE 0x08DF panel, and have amdgpu
disable AUX backlight (use PWM) when the quirk matches and the user
lets the driver auto-select the backlight type.
Signed-off-by: Alessandro Rinaldi <ale@alerinaldi.it>
Tested-by: Alessandro Rinaldi <ale@alerinaldi.it>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the X86_MATCH_VENDOR_FAM() and X86_MATCH_VENDOR_FAM_MODEL() macros
to make the quirks for dynamic speed switching more scalable.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260713172431.1599801-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The change referenced by the Fixes tag releases the HIQ SDMA MQD trunk
buffer when device_queue_manager_init() fails after it has been
allocated.
However, the same failure path can also be reached after
init_mqd_managers() has succeeded. At that point dqm->mqd_mgrs[] contains
per-type MQD manager objects owned by the device queue manager. The
normal teardown path frees those objects from uninitialize(), but the
initialization error path only frees dqm itself.
Free the MQD managers from the initialization error path as well. This is
safe for earlier failures because dqm is zeroed when allocated and
init_mqd_managers() clears the entries it rolls back internally.
Fixes: b7cccc8286 ("drm/amdkfd: fix a memory leak in device_queue_manager_init()")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allow using multiple SDMA schedulers only on GPUs where
we are allowed to do concurrent VM flushes.
This consideration is necessary because all GART windows
are mapped in VMID 0 (the kernel VMID) so each buffer
entity would flush VMID 0 concurrently.
Practically this means that we can't use multiple SDMA
engines for TTM on GFX6-8 and Navi 1x.
Fixes: 01c836788b ("drm/amdgpu: pass all the sdma scheds to amdgpu_mman")
Fixes: e4029f7a94 ("drm/amdgpu: only use working sdma schedulers for ttm")
Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_audio_eld_notify() is currently only called in atomic commits.
This results in the state of the HDA driver never getting updated when
an audio sink is removed and an atomic commit never comes. (eg the HDMI
audio jack switch in ALSA stays 'on' after the HDMI cable is
disconnected if no other display is connected to cause the compositor to
submit an atomic commit)
Call amdgpu_dm_audio_eld_notify() in
amdgpu_dm_update_connector_after_detect() when a sink is no longer
available to ensure that the HDA driver always gets notified on
disconnect regardless of atomic commits.
Assisted-by: Copilot:claude-sonnet-4.6
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While at it, remove redundant error message - request_firmware() will
log a failure anyway.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the lines greppable by removing an extra EOL and report the
status only once - after the reply is detected.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The XGMI reset-on-init path can run while the device is still at the
minimal init level, such as during an NPS memory partition switch. In
that flow the normal RAS IP block hw_init is skipped, so unified RAS
is not enabled when the early CPER initialization is attempted, leaving
CPER disabled for the rest of the device's lifetime.
Resume RAS after the XGMI reset-on-init completes. Once the RAS manager
resume succeeds, the RAS resume wrapper performs deferred CPER
initialization, keeping the path a no-op for devices where CPER was
already initialized.
Keep the deferred CPER retry and its debugfs registration together in
the CPER helper. The normal debugfs ring walk skips the CPER ring until
CPER is enabled, so the ring debugfs entry is created either by the
deferred helper when debugfs is already available or by the normal
debugfs walk.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There were two mistakes in the previous implementation:
The check for AutomaticDCTransition should be inverted.
We recently learned that the kernel should send
PPSMC_MSG_RunningOnAC when the flag is set, and not the
other way around.
The clocks also need to be recomputed, because the code in
the smu7_apply_state_adjust_rules() function selects
different limits on AC and DC.
Fixes: 96da0d8661 ("drm/amd/pm/smu7: Notify SMU7 of DC->AC switch")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 fields in struct amd_ip_funcs have been deleted, so also delete the
kernel-doc comments for them to avoid warnings:
WARNING: ../drivers/gpu/drm/amd/include/amd_shared.h:481 Excess struct member 'check_soft_reset' description in 'amd_ip_funcs'
WARNING: ../drivers/gpu/drm/amd/include/amd_shared.h:481 Excess struct member 'pre_soft_reset' description in 'amd_ip_funcs'
WARNING: ../drivers/gpu/drm/amd/include/amd_shared.h:481 Excess struct member 'post_soft_reset' description in 'amd_ip_funcs'
Fixes: 947e46eb2f ("drm/amdgpu: Delete check_soft_reset() from amd_ip_funcs")
Fixes: b7500532e1 ("drm/amdgpu: Delete pre/post_soft_reset() from amd_ip_funcs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can't print the IP block name when the IP block is NULL.
Note that it should never be NULL, the only way that
can happen is when amdgpu_ip_from_ring() is missing the
given ring type. The check is just there to be sure.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202607031711.yLwFhGfp-lkp@intel.com/
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Simple KMS helpers are deprecated because they introduce an unnecessary
intermediate layer between atomic modesetting and the DRM driver.
Inline the functionality of drm_simple_encoder_init() to remove
dependencies on these deprecated helpers.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Nicolás Antinori <nico.antinori.7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 055a40c32f ("drm/amd/pm: Use uploaded size for legacy custom
PPTable") changed pp_dpm_set_pp_table() to kmemdup the uploaded buffer
directly and set soft_pp_table_size to the uploaded size. As a result
soft_pp_table now points to an allocation completely outside adev->bios,
making the pp_end > bios_end check in pp_entries_max() likely true for
custom PP tables — returning 0 and breaking PP table overrides via sysfs.
Fixes: c42871ba48 ("drm/amdgpu/pm: add pp_entries_max() helper")
Reported-by: John Olender <john.olender@gmail.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Tested-by: John Olender <john.olender@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Widen pcie_bandwidth_inst from U32 to U64 to be consistent with
the smu_v13_0_6 definition.
v2: Remove percent conversion (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update two cases in the smu_v13_0_6 GPU metrics accumulated
counter field definition
Widen the following fields from U32 to U64 to prevent counter
wrap-around and match smu_v15_0_8 field sizes:
- prochot_residency_acc
- ppt_residency_acc
- socket_thm_residency_acc
- vr_thm_residency_acc
- hbm_thm_residency_acc
- gfx_activity_acc
- mem_activity_acc
- pcie_nak_sent_count_acc
- pcie_nak_rcvd_count_acc
- pcie_lc_perf_other_end_recovery
Correct the unit annotation from PERCENT to NONE for accumulated
counter fields which are dimensionless hardware counters and carry
no inherent unit:
- gfx_activity_acc
- mem_activity_acc
- pcie_bandwidth_acc
- gfx_busy_acc
v2: remove percent unit (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setup the MES_API_QUERY_MES__GET_CTX_ARRAY_SIZE MES firmware
command request, and get the MES11 process/gang contex size.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In mes_v11_0_unmap_legacy_queue(), set
remove_queue_after_reset=1 for RESET_QUEUES.
The queue may already be MMIO-reset. This flag
tells MES to drop internal queue state directly
instead of issuing another CP unmap flow, reducing
timeout risk during recovery.
Reviewed-by: Amber Lin <amber.lin@amd.com>
Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMD Ryzen Pinnacle Ridge (Zen+, family 0x17 model 0x08) CPUs have
PCI controllers that don't support PCIe dynamic speed switching,
causing system freezes during GPU initialization when enabled.
Disable dynamic speed switching when this CPU is detected.
Assisted-by: Claude:sonnet
Fixes: 466a7d1153 ("drm/amd: Use the first non-dGPU PCI device for BW limits")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5436
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Link: https://patch.msgid.link/20260709031520.841611-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
