Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmS3jZATHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6Fo4CACVxU4+xMgAszot9Sup7psEiUjbOHKd
TCxEEm9GML/aquPbXxx3r0yztyAzd1dF9zXSFGofUyfVV/pdKbu7h1vP+/EndmiL
W9eoVhnYzAbz2TivFgqQwqqTlosEgKmZF5qGl4eloH6luOILbvrl/UuD0J70h3gK
Ixus6TyEIdI2y1ewTlWXMOriedTVeTX+DC2S02Bi42cVFdAm29nie2fCdHVGhF/o
a0KICO3HjKhTmGReSHDpCMro+r93BezmYxoM96K4a911tge7fLzYhQQ1+ZVyQ3Mw
DRHMD1ehM6cWd0GUce3LqBjb9zx9ciQK0ohqKzAIaEV+Rta84P/CHtbn
=GOLr
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.6-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-07-19
The first 2 patches are by Judith Mendez, target the m_can driver and
add hrtimer based polling support for TI AM62x SoCs, where the
interrupt of the MCU domain's m_can cores is not routed to the Cortex
A53 core.
A patch by Rob Herring converts the grcan driver to use the correct DT
include files.
Michal Simek and Srinivas Neeli add support for optional reset control
to the xilinx_can driver.
The next 2 patches are by Jimmy Assarsson and add support for new
Kvaser pciefd to the kvaser_pciefd driver.
Mao Zhu's patch for the ucan driver removes a repeated word from a
comment.
* tag 'linux-can-next-for-6.6-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ucan: Remove repeated word
can: kvaser_pciefd: Add support for new Kvaser pciefd devices
can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
can: Explicitly include correct DT includes
can: xilinx_can: Add support for controller reset
dt-bindings: can: xilinx_can: Add reset description
can: m_can: Add hrtimer to generate software interrupt
dt-bindings: net: can: Remove interrupt properties for MCAN
====================
Link: https://lore.kernel.org/r/20230719072348.525039-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Introduce a list of generic reset sources and use them to export the
power on reason through sysfs. Update the ABI documentation to describe
this new interface.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[Miquel Raynal: Follow-up on Kamel's work, 4 years later]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Don't populate the read-only array on the stack, instead make it
static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Adds a check of the FORCE_20PCT bit when getting the precharge
current value.
According to the bit description for the FORCE_20PCT bit, when
FORCE_20PCT is true, the precharge current target is 50% of
what is configured in the IPRECHG bit field.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Make it clear that this function always returns either true or false
without other planned failure modes.
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Those who have worked with RCU for some time will naturally think in
terms of the long-standing call_rcu() API rather than the much newer
call_rcu_hurry() API. But it is call_rcu_hurry() that you should normally
pass to synchronize_rcu_mult(). This commit therefore updates the header
comment to point this out.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # samsung
Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # versaclock5
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230718143156.1066339-1-robh@kernel.org
Acked-by: Abel Vesa <abel.vesa@linaro.org> #imx
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Perf traces of network-related workload shows a measurable overhead
inside the network-related selinux hooks while zeroing the
lsm_network_audit struct.
In most cases we can delay the initialization of such structure to the
usage point, avoiding such overhead in a few cases.
Additionally, the audit code accesses the IP address information only
for AF_INET* families, and selinux_parse_skb() will fill-out the
relevant fields in such cases. When the family field is zeroed or the
initialization is followed by the mentioned parsing, the zeroing can be
limited to the sk, family and netif fields.
By factoring out the audit-data initialization to new helpers, this
patch removes some duplicate code and gives small but measurable
performance gain under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add dt-binding documentation for Versal NET platforms.
Versal Net is a new AMD/Xilinx SoC.
The SoC and its architecture is based on the Versal ACAP device.
The Versal Net device includes more security features in the
platform management controller (PMC) and increases the number of
CPUs in the application processing unit (APU) and the real-time
processing unit (RPU).
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20230620110137.5701-1-shubhrajyoti.datta@amd.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Scaling for VTT/VIN5/VIN6 registers were based on prior chips
* Split scaling factors for 6798/6799 and assign at probe()
* Pass them through driver data to sysfs functions
Tested on nct6799 with old/new input/min/max
Fixes: 0599682b82 ("hwmon: (nct6775) Add support for NCT6798D")
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230719192848.337508-1-ahmad@khalifa.ws
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add reset definitions of AST2600 I3C and MAC controllers. In the case of
the I3C reset, since there is no reset-line hardware available for
`ASPEED_RESET_I3C_DMA`, a new macro `ASPEED_RESET_I3C` with the same ID
is introduced to provide a more accurate representation of the hardware.
The old macro `ASPEED_RESET_I3C_DMA` is kept to provide backward
compatibility.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Link: https://lore.kernel.org/r/20230718062616.2822339-1-dylan_hung@aspeedtech.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The "hisilicon,hix5hd2-clock" is simple enough to just add it into its
parent node binding, "hisilicon,cpuctrl".
This fixes a warning that "hisilicon,hix5hd2-clock" is missing a schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230707210700.869060-1-robh@kernel.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This reverts commit 860690a93e.
On the MT8183, the SSPM related clocks were removed claiming a lack of
usage. This however causes some issues when the driver was converted to
the new simple-probe mechanism. This mechanism allocates enough space
for all the clocks defined in the clock driver, not the highest index
in the DT binding. This leads to out-of-bound writes if their are holes
in the DT binding or the driver (due to deprecated or unimplemented
clocks). These errors can go unnoticed and cause memory corruption,
leading to crashes in unrelated areas, or nothing at all. KASAN will
detect them.
Add the SSPM related clocks back to the MT8183 clock driver to fully
implement the DT binding. The SSPM clocks are for the power management
co-processor, and should never be turned off. They are marked as such.
Fixes: 3f37ba7cc3 ("clk: mediatek: mt8183: Convert all remaining clocks to common probe")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230719074251.1219089-1-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the System-Top-Group, Image-Signal-Process, Video-Output
and PLL clocks on the JH7110 SoC. These drivers come with their
associate dt-bindings & the obligatory headers containing defines of
clock indices.
To maintain backwards compatibility, the PLL driver will fall back to
using the fixed factor clocks that were merged for v6.4. The binding has
been updated to only permit sourcing the PLL clocks from the PLL's clock
controller.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZLgaPQAKCRB4tDGHoIJi
0pGIAQC7qIcmFpOJcQkaTVAcKDMhoz9RNQbleMKpFdvrkO0S5gEAjrV0eXNr2eDB
A1K6FKyMMMPTZBcVeAdXc+aPzl8SSAg=
=l9SH
-----END PGP SIGNATURE-----
Merge tag 'clk-starfive-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into clk-starfive
Pull StarFive clk driver updates from Conor Dooley:
Add support for the System-Top-Group, Image-Signal-Process, Video-Output
and PLL clocks on the JH7110 SoC. These drivers come with their
associate dt-bindings & the obligatory headers containing defines of
clock indices.
To maintain backwards compatibility, the PLL driver will fall back to
using the fixed factor clocks that were merged for v6.4. The binding has
been updated to only permit sourcing the PLL clocks from the PLL's clock
controller.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'clk-starfive-for-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
clk: starfive: Add StarFive JH7110 Video-Output clock driver
clk: starfive: Add StarFive JH7110 Image-Signal-Process clock driver
clk: starfive: Add StarFive JH7110 System-Top-Group clock driver
clk: starfive: jh7110-sys: Add PLL clocks source from DTS
clk: starfive: Add StarFive JH7110 PLL clock driver
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
dt-bindings: clock: Add StarFive JH7110 Image-Signal-Process clock and reset generator
dt-bindings: clock: Add StarFive JH7110 System-Top-Group clock and reset generator
dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs
dt-bindings: soc: starfive: Add StarFive syscon module
dt-bindings: clock: Add StarFive JH7110 PLL clock generator
The property "altr,modrst-offset" is only applicable to arm32 SoCFPGA
platforms, thus it not required for all platforms.
While at it, update my email address.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230719132749.661914-1-dinguyen@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This reverts commit 2f3d08f074 ("intel_idle: Add support for using
intel_idle in a VM guest using just hlt"), because it causes functional
issues to appear and it is not really useful without a related commit
that got reverted previously.
Link: https://lore.kernel.org/linux-pm/5c7de6d5-7706-c4a5-7c41-146db1269aff@intel.com
Reported-by: Xiaoyao Li <xiaoyao.li@intel.com>
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Clear TX registers on stop to prevent the SPDIF interface from sending
last written word over and over again.
Fixes: a2388a498a ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230719164729.19969-1-matuszpd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZJLBrQAKCRDh3BK/laaZ
PMGXAQC+EWva3wi86A4MeRAGtVnpQyKeFKRsBjEpU2MKdhvVhQEAn5eCsQAtt/R/
+1WmLVF2uAweoG6eXBKnWx7537dbQAs=
=MdDc
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Small but important fixes and a trivial cleanup"
* tag 'fuse-update-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: ioctl: translate ENOSYS in outarg
fuse: revalidate: don't invalidate if interrupted
fuse: Apply flags2 only when userspace set the FUSE_INIT_EXT
fuse: remove duplicate check for nodeid
fuse: add feature flag for expire-only
This reverts commit b2918089d5 ("intel_idle: Add __init annotation to
matchup_vm_state_with_baremetal()"), because the commit fixed by it will
be reverted.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The OF node reference obtained from of_parse_phandle() should be dropped
if node is not compatible with arm,scmi-shmem.
Fixes: 507cd4d2c5 ("firmware: arm_scmi: Add compatibility checks for shmem node")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230719061652.8850-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Seeing the following:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
...so sync tools version missing some list_node/rb_tree fields.
Fixes: c3c510ce43 ("bpf: Add 'owner' field to bpf_{list,rb}_node")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20230719162257.20818-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add driver for the StarFive JH7110 Video-Output clock controller.
And these clock controllers should power on and enable the clocks from
SYSCRG first before registering.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add driver for the StarFive JH7110 Image-Signal-Process clock controller.
And these clock controllers should power on and enable the clocks from
SYSCRG before registering.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add bindings for the Video-Output clock and reset generator (VOUTCRG)
on the JH7110 RISC-V SoC by StarFive Ltd.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Modify PLL clocks source to be got from DTS or
the fixed factor clocks.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add bindings for the Image-Signal-Process clock and reset
generator (ISPCRG) on the JH7110 RISC-V SoC by StarFive Ltd.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add driver for the StarFive JH7110 PLL clock controller
and they work by reading and setting syscon registers.
Co-developed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add bindings for the System-Top-Group clock and reset generator (STGCRG)
on the JH7110 RISC-V SoC by StarFive Ltd.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Daniel Borkmann says:
====================
BPF link support for tc BPF programs
This series adds BPF link support for tc BPF programs. We initially
presented the motivation, related work and design at last year's LPC
conference in the networking & BPF track [0], and a recent update on
our progress of the rework during this year's LSF/MM/BPF summit [1].
The main changes are in first two patches and the last two have an
extensive batch of test cases we developed along with it, please see
individual patches for details. We tested this series with tc-testing
selftest suite as well as BPF CI/selftests. Thanks!
v5 -> v6:
- Remove export symbol on tcx_inc/dec (Jakub)
- Treat fd==0 as invalid (Stan, Alexei)
v4 -> v5:
- Updated bpftool docs and usage of bpftool net (Quentin)
- Consistent dump "prog id"/"link id" -> "prog_id"/"link_id" (Quentin)
- Reworked bpftool flag output handling (Quentin)
- LIBBPF_OPTS_RESET() macro with varargs for reinit (Andrii)
- libbpf opts/link bail out on relative_fd && relative_id (Andrii)
- libbpf improvements for assigning attr.relative_{id,fd} (Andrii)
- libbpf sorting in libbpf.map (Andrii)
- libbpf move ifindex to bpf_program__attach_tcx param (Andrii)
- libbpf move BPF_F_ID flag handling to bpf_link_create (Andrii)
- bpf_program_attach_fd with tcx instead of tc (Andrii)
- Reworking kernel-internal bpf_mprog API (Alexei, Andrii)
- Change "object" notation to "id_or_fd" (Andrii)
- Remove on stack cpp[BPF_MPROG_MAX] and switch to memmove (Andrii)
- Simplify bpf_mprog_{insert,delete} and add comment on internals
- Get rid of BPF_MPROG_* return codes (Alexei, Andrii)
v3 -> v4:
- Fix bpftool output to display tcx/{ingress,egress} (Stan)
- Documentation around API, BPF_MPROG_* return codes and locking
expectations (Stan, Alexei)
- Change _after and _before to have the same semantics for return
value (Alexei)
- Rework mprog initialization and move allocation/free one layer
up into tcx to simplify the code (Stan)
- Add comment on synchronize_rcu and parent->ref (Stan)
- Add comment on bpf_mprog_pos_() helpers wrt target position (Stan)
v2 -> v3:
- Removal of BPF_F_FIRST/BPF_F_LAST from control UAPI (Toke, Stan)
- Along with that full rework of bpf_mprog internals to simplify
dependency management, looks much nicer now imho
- Just single bpf_mprog_cp instead of two (Andrii)
- atomic64_t for revision counter (Andrii)
- Evaluate target position and reject on conflicts (Andrii)
- Keep track of actual count in bpf_mprob_bundle (Andrii)
- Make combo of REPLACE and BEFORE/AFTER work (Andrii)
- Moved miniq as first struct member (Jamal)
- Rework tcx_link_attach with regards to rtnl (Jakub, Andrii)
- Moved wrappers after bpf_prog_detach_ops (Andrii)
- Removed union for relative_fd and friends for opts and link in
libbpf (Andrii)
- Add doc comments to attach/detach/query libbpf APIs (Andrii)
- Dropped SEC_ATTACHABLE_OPT (Andrii)
- Add an OPTS_ZEROED check to bpf_link_create (Andrii)
- Keep opts as the last argument in bpf_program_attach_fd (Andrii)
- Rework bpf_program_attach_fd (Andrii)
- Remove OPTS_GET before we checked OPTS_VALID in
bpf_program__attach_tcx (Andrii)
- Add `size_t :0;` to prevent compiler from leaving garbage (Andrii)
- Add helper macro to clear opts structs which I found useful
when writing tests
- Rework of both opts and link test cases to accommodate for changes
v1 -> v2:
- Rework of almost entire series to remove prio from UAPI and switch
to better control directives BPF_F_FIRST/BPF_F_LAST/BPF_F_BEFORE/
BPF_F_AFTER (Alexei, Toke, Stan, Andrii)
- Addition of big test suite to cover all corner cases
[0] https://lpc.events/event/16/contributions/1353/
[1] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
====================
Link: https://lore.kernel.org/r/20230719140858.13224-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support to dump fd-based attach types via bpftool. This includes both
the tc BPF link and attach ops programs. Dumped information contain the
attach location, function entry name, program ID and link ID when applicable.
Example with tc BPF link:
# ./bpftool net
xdp:
tc:
bond0(4) tcx/ingress cil_from_netdev prog_id 784 link_id 10
bond0(4) tcx/egress cil_to_netdev prog_id 804 link_id 11
flow_dissector:
netfilter:
Example with tc BPF attach ops:
# ./bpftool net
xdp:
tc:
bond0(4) tcx/ingress cil_from_netdev prog_id 654
bond0(4) tcx/egress cil_to_netdev prog_id 672
flow_dissector:
netfilter:
Currently, permanent flags are not yet supported, so 'unknown' ones are dumped
via NET_DUMP_UINT_ONLY() and once we do have permanent ones, we dump them as
human readable string.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230719140858.13224-7-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a small and generic LIBBPF_OPTS_RESET() helper macros which clears an
opts structure and reinitializes its .sz member to place the structure
size. Additionally, the user can pass option-specific data to reinitialize
via varargs.
I found this very useful when developing selftests, but it is also generic
enough as a macro next to the existing LIBBPF_OPTS() which hides the .sz
initialization, too.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230719140858.13224-6-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement tcx BPF link support for libbpf.
The bpf_program__attach_fd() API has been refactored slightly in order to pass
bpf_link_create_opts pointer as input.
A new bpf_program__attach_tcx() has been added on top of this which allows for
passing all relevant data via extensible struct bpf_tcx_opts.
The program sections tcx/ingress and tcx/egress correspond to the hook locations
for tc ingress and egress, respectively.
For concrete usage examples, see the extensive selftests that have been
developed as part of this series.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-5-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend libbpf attach opts and add a new detach opts API so this can be used
to add/remove fd-based tcx BPF programs. The old-style bpf_prog_detach() and
bpf_prog_detach2() APIs are refactored to reuse the new bpf_prog_detach_opts()
internally.
The bpf_prog_query_opts() API got extended to be able to handle the new
link_ids, link_attach_flags and revision fields.
For concrete usage examples, see the extensive selftests that have been
developed as part of this series.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>