commit e7956c92f3 upstream.
is_spectre_bhb_fw_affected() allows the caller to determine if the CPU
is known to need a firmware mitigation. CPUs are either on the list
of CPUs we know about, or firmware has been queried and reported that
the platform is affected - and mitigated by firmware.
This helper is not useful to determine if the platform is mitigated
by firmware. A CPU could be on the know list, but the firmware may
not be implemented. Its affected but not mitigated.
spectre_bhb_enable_mitigation() handles this distinction by checking
the firmware state before enabling the mitigation.
Add a helper to expose this state. This will be used by the BPF JIT
to determine if calling firmware for a mitigation is necessary and
supported.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63de8abd97 upstream.
To generate code in the eBPF epilogue that uses the DSB instruction,
insn.c needs a heler to encode the type and domain.
Re-use the crm encoding logic from the DMB instruction.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbce3de72b upstream.
There is a code path in dequeue_entities() that can set the slice of a
sched_entity to U64_MAX, which sometimes results in a crash.
The offending case is when dequeue_entities() is called to dequeue a
delayed group entity, and then the entity's parent's dequeue is delayed.
In that case:
1. In the if (entity_is_task(se)) else block at the beginning of
dequeue_entities(), slice is set to
cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then
it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX.
2. The first for_each_sched_entity() loop dequeues the entity.
3. If the entity was its parent's only child, then the next iteration
tries to dequeue the parent.
4. If the parent's dequeue needs to be delayed, then it breaks from the
first for_each_sched_entity() loop _without updating slice_.
5. The second for_each_sched_entity() loop sets the parent's ->slice to
the saved slice, which is still U64_MAX.
This throws off subsequent calculations with potentially catastrophic
results. A manifestation we saw in production was:
6. In update_entity_lag(), se->slice is used to calculate limit, which
ends up as a huge negative number.
7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit
is negative, vlag > limit, so se->vlag is set to the same huge
negative number.
8. In place_entity(), se->vlag is scaled, which overflows and results in
another huge (positive or negative) number.
9. The adjusted lag is subtracted from se->vruntime, which increases or
decreases se->vruntime by a huge number.
10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which
incorrectly returns false because the vruntime is so far from the
other vruntimes on the queue, causing the
(vruntime - cfs_rq->min_vruntime) * load calulation to overflow.
11. Nothing appears to be eligible, so pick_eevdf() returns NULL.
12. pick_next_entity() tries to dereference the return value of
pick_eevdf() and crashes.
Dumping the cfs_rq states from the core dumps with drgn showed tell-tale
huge vruntime ranges and bogus vlag values, and I also traced se->slice
being set to U64_MAX on live systems (which was usually "benign" since
the rest of the runqueue needed to be in a particular state to crash).
Fix it in dequeue_entities() by always setting slice from the first
non-empty cfs_rq.
Fixes: aef6987d89 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/f0c2d1072be229e1bdddc73c0703919a8b00c652.1745570998.git.osandov@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90abee6d78 upstream.
The test robot identified c2f6ea38fc ("mm: page_alloc: don't steal
single pages from biggest buddy") as the root cause of a 56.4% regression
in vm-scalability::lru-file-mmap-read.
Carlos reports an earlier patch, c0cd6f557b ("mm: page_alloc: fix
freelist movement during block conversion"), as the root cause for a
regression in worst-case zone->lock+irqoff hold times.
Both of these patches modify the page allocator's fallback path to be less
greedy in an effort to stave off fragmentation. The flip side of this is
that fallbacks are also less productive each time around, which means the
fallback search can run much more frequently.
Carlos' traces point to rmqueue_bulk() specifically, which tries to refill
the percpu cache by allocating a large batch of pages in a loop. It
highlights how once the native freelists are exhausted, the fallback code
first scans orders top-down for whole blocks to claim, then falls back to
a bottom-up search for the smallest buddy to steal. For the next batch
page, it goes through the same thing again.
This can be made more efficient. Since rmqueue_bulk() holds the
zone->lock over the entire batch, the freelists are not subject to outside
changes; when the search for a block to claim has already failed, there is
no point in trying again for the next page.
Modify __rmqueue() to remember the last successful fallback mode, and
restart directly from there on the next rmqueue_bulk() iteration.
Oliver confirms that this improves beyond the regression that the test
robot reported against c2f6ea38fc:
commit:
f3b92176f4 ("tools/selftests: add guard region test for /proc/$pid/pagemap")
c2f6ea38fc ("mm: page_alloc: don't steal single pages from biggest buddy")
acc4d5ff0b ("Merge tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
2c847f27c3 ("mm: page_alloc: speed up fallbacks in rmqueue_bulk()") <--- your patch
f3b92176f4c2f6ea38fcacc4d5ff0b 2c847f27c37da65a93d23c237c5
---------------- --------------------------- --------------------------- ---------------------------
%stddev %change %stddev %change %stddev %change %stddev
\ | \ | \ | \
25525364 ± 3% -56.4% 11135467 -57.8% 10779336 +31.6% 33581409 vm-scalability.throughput
Carlos confirms that worst-case times are almost fully recovered
compared to before the earlier culprit patch:
2dd482ba62 (before freelist hygiene): 1ms
c0cd6f557b (after freelist hygiene): 90ms
next-20250319 (steal smallest buddy): 280ms
this patch : 8ms
[jackmanb@google.com: comment updates]
Link: https://lkml.kernel.org/r/D92AC0P9594X.3BML64MUKTF8Z@google.com
[hannes@cmpxchg.org: reset rmqueue_mode in rmqueue_buddy() error loop, per Yunsheng Lin]
Link: https://lkml.kernel.org/r/20250409140023.GA2313@cmpxchg.org
Link: https://lkml.kernel.org/r/20250407180154.63348-1-hannes@cmpxchg.org
Fixes: c0cd6f557b ("mm: page_alloc: fix freelist movement during block conversion")
Fixes: c2f6ea38fc ("mm: page_alloc: don't steal single pages from biggest buddy")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Carlos Song <carlos.song@nxp.com>
Tested-by: Carlos Song <carlos.song@nxp.com>
Tested-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202503271547.fc08b188-lkp@intel.com
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [6.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2f6ea38fc upstream.
The fallback code searches for the biggest buddy first in an attempt to
steal the whole block and encourage type grouping down the line.
The approach used to be this:
- Non-movable requests will split the largest buddy and steal the
remainder. This splits up contiguity, but it allows subsequent
requests of this type to fall back into adjacent space.
- Movable requests go and look for the smallest buddy instead. The
thinking is that movable requests can be compacted, so grouping is
less important than retaining contiguity.
c0cd6f557b ("mm: page_alloc: fix freelist movement during block
conversion") enforces freelist type hygiene, which restricts stealing to
either claiming the whole block or just taking the requested chunk; no
additional pages or buddy remainders can be stolen any more.
The patch mishandled when to switch to finding the smallest buddy in that
new reality. As a result, it may steal the exact request size, but from
the biggest buddy. This causes fracturing for no good reason.
Fix this by committing to the new behavior: either steal the whole block,
or fall back to the smallest buddy.
Remove single-page stealing from steal_suitable_fallback(). Rename it to
try_to_steal_block() to make the intentions clear. If this fails, always
fall back to the smallest buddy.
The following is from 4 runs of mmtest's thpchallenge. "Pollute" is
single page fallback, "steal" is conversion of a partially used block.
The numbers for free block conversions (omitted) are comparable.
vanilla patched
@pollute[unmovable from reclaimable]: 27 106
@pollute[unmovable from movable]: 82 46
@pollute[reclaimable from unmovable]: 256 83
@pollute[reclaimable from movable]: 46 8
@pollute[movable from unmovable]: 4841 868
@pollute[movable from reclaimable]: 5278 12568
@steal[unmovable from reclaimable]: 11 12
@steal[unmovable from movable]: 113 49
@steal[reclaimable from unmovable]: 19 34
@steal[reclaimable from movable]: 47 21
@steal[movable from unmovable]: 250 183
@steal[movable from reclaimable]: 81 93
The allocator appears to do a better job at keeping stealing and polluting
to the first fallback preference. As a result, the numbers for "from
movable" - the least preferred fallback option, and most detrimental to
compactability - are down across the board.
Link: https://lkml.kernel.org/r/20250225001023.1494422-2-hannes@cmpxchg.org
Fixes: c0cd6f557b ("mm: page_alloc: fix freelist movement during block conversion")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33634e2ab7 upstream.
Remove the resetting step before downloading the fw, as it may cause
other usb devices to fail to initialise when connected during boot
on kernels 6.11 and newer.
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: "Geoffrey D. Bennett" <g@b4.vu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a720861076 upstream.
Remove resetting mt7921 before downloading the fw, as it may cause
command timeout when performing the reset.
Signed-off-by: Hao Qin <hao.qin@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: "Geoffrey D. Bennett" <g@b4.vu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b53e523261 upstream.
There are a few spots where linked timeouts are armed, and not all of
them adhere to the pre-arm, attempt issue, post-arm pattern. This can
be problematic if the linked request returns that it will trigger a
callback later, and does so before the linked timeout is fully armed.
Consolidate all the linked timeout handling into __io_issue_sqe(),
rather than have it spread throughout the various issue entry points.
Cc: stable@vger.kernel.org
Link: https://github.com/axboe/liburing/issues/1390
Reported-by: Chase Hiltz <chase@path.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 211dcf7785 upstream.
Starting with Rust 1.88.0 (expected 2025-06-26) [1], `rustc` may move
back the `uninlined_format_args` to `style` from `pedantic` (it was
there waiting for rust-analyzer suppotr), and thus we will start to see
lints like:
warning: variables can be used directly in the `format!` string
--> rust/macros/kunit.rs:105:37
|
105 | let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
help: change this to
|
105 - let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test);
105 + let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{test}");
There is even a case that is a pure removal:
warning: variables can be used directly in the `format!` string
--> rust/macros/module.rs:51:13
|
51 | format!("{field}={content}\0", field = field, content = content)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
help: change this to
|
51 - format!("{field}={content}\0", field = field, content = content)
51 + format!("{field}={content}\0")
The lints all seem like nice cleanups, thus just apply them.
We may want to disable `allow-mixed-uninlined-format-args` in the future.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14160 [1]
Acked-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit da780c4a07 which is
commit 887c5c12e8 upstream.
Reason being that the patch depends on at least commit 0b8b2668f9
("um: insert scheduler ticks when userspace does not yield") in order to
build. Otherwise it fails with:
| /usr/bin/ld: arch/um/kernel/skas/syscall.o: in function `handle_syscall':
| linux-6.12.27/arch/um/kernel/skas/syscall.c:43:(.text+0xa2): undefined
| reference to `tt_extra_sched_jiffies'
| collect2: error: ld returned 1 exit status
The author Benjamin Berg commented: "I think it is better to just not
backport commit 0b8b2668f9 ("um: insert scheduler ticks when userspace
does not yield")"
Link: https://lore.kernel.org/linux-um/8ce0b6056a9726e540f61bce77311278654219eb.camel@sipsolutions.net/
Cc: <stable@vger.kernel.org> # 6.12.y
Cc: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65781e19dc ]
do_umount() analogue of the race fixed in 119e1ef80e "fix
__legitimize_mnt()/mntput() race". Here we want to make sure that
if __legitimize_mnt() doesn't notice our lock_mount_hash(), we will
notice their refcount increment. Harder to hit than mntput_no_expire()
one, fortunately, and consequences are milder (sync umount acting
like umount -l on a rare race with RCU pathwalk hitting at just the
wrong time instead of use-after-free galore mntput_no_expire()
counterpart used to be hit). Still a bug...
Fixes: 48a066e72d ("RCU'd vfsmounts")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92835cebab ]
Our QA team reported a 10%-23%, throughput reduction on an io_uring
sqpoll testcase doing IO to a null_blk, that I traced back to a
reduction of the device submission queue depth utilization. It turns out
that, after commit af5d68f889 ("io_uring/sqpoll: manage task_work
privately"), we capped the number of task_work entries that can be
completed from a single spin of sqpoll to only 8 entries, before the
sqpoll goes around to (potentially) sleep. While this cap doesn't drive
the submission side directly, it impacts the completion behavior, which
affects the number of IO queued by fio per sqpoll cycle on the
submission side, and io_uring ends up seeing less ios per sqpoll cycle.
As a result, block layer plugging is less effective, and we see more
time spent inside the block layer in profilings charts, and increased
submission latency measured by fio.
There are other places that have increased overhead once sqpoll sleeps
more often, such as the sqpoll utilization calculation. But, in this
microbenchmark, those were not representative enough in perf charts, and
their removal didn't yield measurable changes in throughput. The major
overhead comes from the fact we plug less, and less often, when submitting
to the block layer.
My benchmark is:
fio --ioengine=io_uring --direct=1 --iodepth=128 --runtime=300 --bs=4k \
--invalidate=1 --time_based --ramp_time=10 --group_reporting=1 \
--filename=/dev/nullb0 --name=RandomReads-direct-nullb-sqpoll-4k-1 \
--rw=randread --numjobs=1 --sqthread_poll
In one machine, tested on top of Linux 6.15-rc1, we have the following
baseline:
READ: bw=4994MiB/s (5236MB/s), 4994MiB/s-4994MiB/s (5236MB/s-5236MB/s), io=439GiB (471GB), run=90001-90001msec
With this patch:
READ: bw=5762MiB/s (6042MB/s), 5762MiB/s-5762MiB/s (6042MB/s-6042MB/s), io=506GiB (544GB), run=90001-90001msec
which is a 15% improvement in measured bandwidth. The average
submission latency is noticeably lowered too. As measured by
fio:
Baseline:
lat (usec): min=20, max=241, avg=99.81, stdev=3.38
Patched:
lat (usec): min=26, max=226, avg=86.48, stdev=4.82
If we look at blktrace, we can also see the plugging behavior is
improved. In the baseline, we end up limited to plugging 8 requests in
the block layer regardless of the device queue depth size, while after
patching we can drive more io, and we manage to utilize the full device
queue.
In the baseline, after a stabilization phase, an ordinary submission
looks like:
254,0 1 49942 0.016028795 5977 U N [iou-sqp-5976] 7
After patching, I see consistently more requests per unplug.
254,0 1 4996 0.001432872 3145 U N [iou-sqp-3144] 32
Ideally, the cap size would at least be the deep enough to fill the
device queue, but we can't predict that behavior, or assume all IO goes
to a single device, and thus can't guess the ideal batch size. We also
don't want to let the tw run unbounded, though I'm not sure it would
really be a problem. Instead, let's just give it a more sensible value
that will allow for more efficient batching. I've tested with different
cap values, and initially proposed to increase the cap to 1024. Jens
argued it is too big of a bump and I observed that, with 32, I'm no
longer able to observe this bottleneck in any of my machines.
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20250508181203.3785544-1-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a966d677d ]
With xe_force_wake_get() now returning the refcount-incremented domain
mask, a return value of 0 indicates failure for single domains.
Change assert condition to incorporate this change in return and
pass the return value to xe_force_wake_put()
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
v5
- return unsigned int for xe_force_wake_get()
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-13-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stable-dep-of: 51c0ee84e4 ("drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 453805f0a2 ]
We can safely reenable IRQs if coming from userspace. This allows to
access user memory that could potentially trigger a page fault.
Fixes: b686ecdeac ("riscv: misaligned: Restrict user access to kernel memory")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-3-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd94de9f9e ]
Since both load/store and user/kernel should use almost the same path and
that we are going to add some code around that, factorize it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422162324.956065-2-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Stable-dep-of: 453805f0a2 ("riscv: misaligned: enable IRQs while handling misaligned accesses")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 650415fca0 ]
The original nvme subsystem design didn't have a CONNECTING state; the
state machine allowed transitions from RESETTING to LIVE directly.
With the introduction of nvme fabrics the CONNECTING state was
introduce. Over time the nvme-pci started to use the CONNECTING state as
well.
Eventually, a bug fix for the nvme-fc started to depend that the only
valid transition to LIVE was from CONNECTING. Though this change didn't
update the firmware update handler which was still depending on
RESETTING to LIVE transition.
The simplest way to address it for the time being is to switch into
CONNECTING state before going to LIVE state.
Fixes: d2fe192348 ("nvme: only allow entering LIVE from CONNECTING state")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Closes: https://lore.kernel.org/all/0134ea15-8d5f-41f7-9e9a-d7e6d82accaa@roeck-us.net
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d278164832 ]
Split the code for setting up a backing file into a helper in preparation
of adding more code to this path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250131120120.1315125-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: f5c84eff63 ("loop: Add sanity check for read/write_iter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b38c8be255 ]
Replace loop_reconfigure_limits with a slightly less encompassing
loop_update_limits that expects the caller to acquire and commit the
queue limits to prepare for sorting out the freeze vs limits lock
ordering.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: f5c84eff63 ("loop: Add sanity check for read/write_iter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b49125574c ]
Current loop calls vfs_statfs() while holding the q->limits_lock. If
FS takes some locking in vfs_statfs callback, this may lead to ABBA
locking bug (at least, FAT fs has this issue actually).
So this patch calls vfs_statfs() outside q->limits_locks instead,
because looks like no reason to hold q->limits_locks while getting
discord configs.
Chain exists of:
&sbi->fat_lock --> &q->q_usage_counter(io)#17 --> &q->limits_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->limits_lock);
lock(&q->q_usage_counter(io)#17);
lock(&q->limits_lock);
lock(&sbi->fat_lock);
*** DEADLOCK ***
Reported-by: syzbot+a5d8c609c02f508672cc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5d8c609c02f508672cc
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: f5c84eff63 ("loop: Add sanity check for read/write_iter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d47de6ac88 ]
A bdev discard granularity is always at least SECTOR_SIZE, so don't check
for a zero value.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241101092215.422428-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: f5c84eff63 ("loop: Add sanity check for read/write_iter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d3fd059dd ]
Instead of directly looking at the request_queue limits, use the bdev
limits helpers, which is preferable.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241030111900.3981223-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: f5c84eff63 ("loop: Add sanity check for read/write_iter")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c44572e0cc ]
Fix MAX_REG_OFFSET to point to the last register in 'pt_regs' and not to
the marker itself, which could allow regs_get_register() to return an
invalid offset.
Fixes: 40e084a506 ("MIPS: Add uprobes support.")
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5097eaae98 ]
Here the lack of marking allows the overall structure to not be
sufficiently aligned resulting in misplacement of the timestamp
in iio_push_to_buffers_with_timestamp(). Use aligned_s64 to
force the alignment on all architectures.
Fixes: 7c0299e879 ("iio: adc: Add support for DLN2 ADC")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bb942287e ]
The IIO ABI requires 64-bit aligned timestamps. In this case insufficient
padding would have been added on architectures where an s64 is only 32-bit
aligned. Use aligned_s64 to enforce the correct alignment.
Fixes: 327a0eaf19 ("iio: accel: adxl355: Add triggered buffer support")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4ca0e59c3 ]
Some user may want to use aligned signed 64-bit type.
Provide it for them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240903180218.3640501-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 1bb942287e ("iio: accel: adxl355: Make timestamp 64-bit aligned using aligned_s64")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f79aeb6c63 ]
The trick of using __aligned(IIO_DMA_MINALIGN) ensures that there is
no overlap between buffers used for DMA and those used for driver
state storage that are before the marking. It doesn't ensure
anything above state variables found after the marking. Hence
move this particular bit of state earlier in the structure.
Fixes: 10897f3430 ("iio: temp: maxim_thermocouple: Fix alignment for DMA safety")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-14-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38f67d0264 ]
Fix setting the odr value to update activity time based on frequency
derrived by recent odr, and not by obsolete odr value.
The [small] bug: When _adxl367_set_odr() is called with a new odr value,
it first writes the new odr value to the hardware register
ADXL367_REG_FILTER_CTL.
Second, it calls _adxl367_set_act_time_ms(), which calls
adxl367_time_ms_to_samples(). Here st->odr still holds the old odr value.
This st->odr member is used to derrive a frequency value, which is
applied to update ADXL367_REG_TIME_ACT. Hence, the idea is to update
activity time, based on possibilities and power consumption by the
current ODR rate.
Finally, when the function calls return, again in _adxl367_set_odr() the
new ODR is assigned to st->odr.
The fix: When setting a new ODR value is set to ADXL367_REG_FILTER_CTL,
also ADXL367_REG_TIME_ACT should probably be updated with a frequency
based on the recent ODR value and not the old one. Changing the location
of the assignment to st->odr fixes this.
Fixes: cbab791c5e ("iio: accel: add ADXL367 driver")
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://patch.msgid.link/20250309193515.2974-1-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4e77d3ec7c upstream.
wait_event_interruptible_timeout returns a long
The return value was being assigned to an int causing an integer overflow
when the remaining jiffies > INT_MAX which resulted in random error
returns.
Use a long return value, converting to the int ioctl return only on error.
Fixes: bb99794a47 ("usb: usbtmc: Add ioctl for vendor specific read")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502070941.31819-4-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9747c9b8b upstream.
wait_event_interruptible_timeout returns a long
The return was being assigned to an int causing an integer overflow when
the remaining jiffies > INT_MAX resulting in random error returns.
Use a long return value, converting to the int ioctl return only on
error.
Fixes: 739240a9f6 ("usb: usbtmc: Add ioctl USBTMC488_IOCTL_WAIT_SRQ")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502070941.31819-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cac01bd178 upstream.
wait_event_interruptible_timeout returns a long
The return was being assigned to an int causing an integer overflow when
the remaining jiffies > INT_MAX resulting in random error returns.
Use a long return value and convert to int ioctl return only on error.
When the return value of wait_event_interruptible_timeout was <= INT_MAX
the number of remaining jiffies was returned which has no meaning for the
user. Return 0 on success.
Reported-by: Michael Katzmann <vk2bea@gmail.com>
Fixes: dbf3e7f654 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250502070941.31819-2-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 054c514554 upstream.
usbtmc_read() calls usbtmc_generic_read()
which uses interruptible sleep, but usbtmc_read()
itself uses uninterruptble sleep for mutual exclusion
between threads. That makes no sense.
Both should use interruptible sleep.
Fixes: 5b775f672c ("USB: add USB test and measurement class driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20250430134810.226015-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 312d79669e upstream.
This patch ensures that the UCSI driver waits for all pending tasks in the
ucsi_displayport_work workqueue to finish executing before proceeding with
the partner removal.
Cc: stable <stable@kernel.org>
Fixes: af8622f6a5 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20250424084429.3220757-3-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e918d3959b upstream.
This patch fixes Type-C Compliance Test TD 4.7.6 - Try.SNK DRP Connect
SNKAS.
The compliance tester moves into SNK_UNATTACHED during toggling and
expects the PUT to apply Rp after tPDDebounce of detection. If the port
is in SNK_TRY_WAIT_DEBOUNCE, it will move into SRC_TRYWAIT immediately
and apply Rp. This violates TD 4.7.5.V.3, where the tester confirms that
the PUT attaches Rp after the transitions to Unattached.SNK for
tPDDebounce.
Change the tcpm_set_state delay between SNK_TRY_WAIT_DEBOUNCE and
SRC_TRYWAIT to tPDDebounce.
Fixes: a0a3e04e6b ("staging: typec: tcpm: Check for Rp for tPDDebounce")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250429234703.3748506-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f657a9280 upstream.
The Cypress HX3 USB3.0 hubs use different PID values depending
on the product variant. The comment in compatibles table is
misleading, as the currently used PIDs (0x6504 and 0x6506 for
USB 3.0 and USB 2.0, respectively) are defaults for the CYUSB331x,
while CYUSB330x and CYUSB332x variants use different values.
Based on the datasheet [1], update the compatible usb devices table
to handle different types of the hub.
The change also includes vendor mode PIDs, which are used by the
hub in I2C Master boot mode, if connected EEPROM contains invalid
signature or is blank. This allows to correctly boot the hub even
if the EEPROM will have broken content.
Number of vcc supplies and timing requirements are the same for all
HX variants, so the platform driver's match table does not have to
be extended.
[1] https://www.infineon.com/dgdl/Infineon-HX3_USB_3_0_Hub_Consumer_Industrial-DataSheet-v22_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ecb53f644b8
Table 9. PID Values
Fixes: b43cd82a1a ("usb: misc: onboard-hub: add support for Cypress HX3 USB 3.0 family")
Cc: stable <stable@kernel.org>
Signed-off-by: Lukasz Czechowski <lukasz.czechowski@thaumatec.com>
Link: https://lore.kernel.org/r/20250425-onboard_usb_dev-v2-1-4a76a474a010@thaumatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 732f35cf8b upstream.
When a USB device is connected to the OTG port, the tegra_xhci_id_work()
routine transitions the PHY to host mode and calls xhci_hub_control()
with the SetPortFeature command to enable port power.
In certain cases, the XHCI controller may be in a low-power state
when this operation occurs. If xhci_hub_control() is invoked while
the controller is suspended, the PORTSC register may return 0xFFFFFFFF,
indicating a read failure. This causes xhci_hc_died() to be triggered,
leading to host controller shutdown.
Example backtrace:
[ 105.445736] Workqueue: events tegra_xhci_id_work
[ 105.445747] dump_backtrace+0x0/0x1e8
[ 105.445759] xhci_hc_died.part.48+0x40/0x270
[ 105.445769] tegra_xhci_set_port_power+0xc0/0x240
[ 105.445774] tegra_xhci_id_work+0x130/0x240
To prevent this, ensure the controller is fully resumed before
interacting with hardware registers by calling pm_runtime_get_sync()
prior to the host mode transition and xhci_hub_control().
Fixes: f836e78430 ("usb: xhci-tegra: Add OTG support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20250422114001.126367-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5977a58dd5 upstream.
Currently when the host sends GET_STATUS request for an interface,
we use get_status callbacks to set/clear remote wakeup capability
of that interface. And if get_status callback isn't present for
that interface, then we assume its remote wakeup capability based
on bmAttributes.
Now consider a scenario, where we have a USB configuration with
multiple interfaces (say ECM + ADB), here ECM is remote wakeup
capable and as of now ADB isn't. And bmAttributes will indicate
the device as wakeup capable. With the current implementation,
when host sends GET_STATUS request for both interfaces, we will
set FUNC_RW_CAP for both. This results in USB3 CV Chapter 9.15
(Function Remote Wakeup Test) failures as host expects remote
wakeup from both interfaces.
The above scenario is just an example, and the failure can be
observed if we use configuration with any interface except ECM.
Hence avoid configuring remote wakeup capability from composite
driver based on bmAttributes, instead use get_status callbacks
and let the function drivers decide this.
Cc: stable <stable@kernel.org>
Fixes: 481c225c48 ("usb: gadget: Handle function suspend feature selector")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250422103231.1954387-3-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59820fde00 upstream.
We identified a bug where the ST_RC bit in the status register was not
being acknowledged after clearing the CTRL_RUN bit in the control
register. This could lead to unexpected behavior in the USB gadget
drivers.
This patch resolves the issue by adding the necessary code to explicitly
acknowledge ST_RC after clearing CTRL_RUN based on the programming
sequence, ensuring proper state transition.
Fixes: 49db427232 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@kernel.org>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20250418081228.1194779-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e3820271c upstream.
When host sends GET_STATUS to ECM interface, handle the request
from the function driver. Since the interface is wakeup capable,
set the corresponding bit, and set RW bit if the function is
already armed for wakeup by the host.
Cc: stable <stable@kernel.org>
Fixes: 481c225c48 ("usb: gadget: Handle function suspend feature selector")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250422103231.1954387-2-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8614ecdb15 upstream.
The controllers with rtl version larger than
RTL_REVISION_NEW_LPM (0x00002700) has bug which causes that controller
doesn't resume from L1 state. It happens if after receiving LPM packet
controller starts transitioning to L1 and in this moment the driver force
resuming by write operation to PORTSC.PLS.
It's corner case and happens when write operation to PORTSC occurs during
device delay before transitioning to L1 after transmitting ACK
time (TL1TokenRetry).
Forcing transition from L1->L0 by driver for revision larger than
RTL_REVISION_NEW_LPM is not needed, so driver can simply fix this issue
through block call of cdnsp_force_l0_go function.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538B55C3A6E71F9ED29E980DD842@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 241e2ce88e upstream.
In very rare cases after resuming controller from L1 to L0 it reads
registers before the clock UTMI have been enabled and as the result
driver reads incorrect value.
Most of registers are in APB domain clock but some of them (e.g. PORTSC)
are in UTMI domain clock.
After entering to L1 state the UTMI clock can be disabled.
When controller transition from L1 to L0 the port status change event is
reported and in interrupt runtime function driver reads PORTSC.
During this read operation controller synchronize UTMI and APB domain
but UTMI clock is still disabled and in result it reads 0xFFFFFFFF value.
To fix this issue driver increases APB timeout value.
The issue is platform specific and if the default value of APB timeout
is not sufficient then this time should be set Individually for each
platform.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB953846C57973E4DB134CAA71DDBF2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2372f1caec upstream.
Currently gadget_wakeup() waits for U0 synchronously if it was
called from func_wakeup(), this is because we need to send the
function wakeup command soon after the link is active. And the
call is made synchronous by polling DSTS continuosly for 20000
times in __dwc3_gadget_wakeup(). But it observed that sometimes
the link is not active even after polling 20K times, leading to
remote wakeup failures. Adding a small delay between each poll
helps, but that won't guarantee resolution in future. Hence make
the gadget_wakeup completely asynchronous.
Since multiple interfaces can issue a function wakeup at once,
add a new variable wakeup_pending_funcs which will indicate the
functions that has issued func_wakup, this is represented in a
bitmap format. If the link is in U3, dwc3_gadget_func_wakeup()
will set the bit corresponding to interface_id and bail out.
Once link comes back to U0, linksts_change irq is triggered,
where the function wakeup command is sent based on bitmap.
Cc: stable <stable@kernel.org>
Fixes: 92c08a84b5 ("usb: dwc3: Add function suspend and function wakeup support")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250422103231.1954387-4-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fcaf3b2683 upstream.
Currently quota recovery is synchronized with unmount using sb->s_umount
semaphore. That is however prone to deadlocks because
flush_workqueue(osb->ocfs2_wq) called from umount code can wait for quota
recovery to complete while ocfs2_finish_quota_recovery() waits for
sb->s_umount semaphore.
Grabbing of sb->s_umount semaphore in ocfs2_finish_quota_recovery() is
only needed to protect that function from disabling of quotas from
ocfs2_dismount_volume(). Handle this problem by disabling quota recovery
early during unmount in ocfs2_dismount_volume() instead so that we can
drop acquisition of sb->s_umount from ocfs2_finish_quota_recovery().
Link: https://lkml.kernel.org/r/20250424134515.18933-6-jack@suse.cz
Fixes: 5f530de63c ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Shichangkuo <shi.changkuo@h3c.com>
Reported-by: Murad Masimov <m.masimov@mt-integration.ru>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f947e0fd5 upstream.
We will need ocfs2 recovery thread to acknowledge transitions of
recovery_state when disabling particular types of recovery. This is
similar to what currently happens when disabling recovery completely, just
more general. Implement the handshake and use it for exit from recovery.
Link: https://lkml.kernel.org/r/20250424134515.18933-5-jack@suse.cz
Fixes: 5f530de63c ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Murad Masimov <m.masimov@mt-integration.ru>
Cc: Shichangkuo <shi.changkuo@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0fb83088f upstream.
Patch series "ocfs2: Fix deadlocks in quota recovery", v3.
This implements another approach to fixing quota recovery deadlocks. We
avoid grabbing sb->s_umount semaphore from ocfs2_finish_quota_recovery()
and instead stop quota recovery early in ocfs2_dismount_volume().
This patch (of 3):
We will need more recovery states than just pure enable / disable to fix
deadlocks with quota recovery. Switch osb->disable_recovery to enum.
Link: https://lkml.kernel.org/r/20250424134301.1392-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20250424134515.18933-4-jack@suse.cz
Fixes: 5f530de63c ("ocfs2: Use s_umount for quota recovery protection")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Tested-by: Heming Zhao <heming.zhao@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Murad Masimov <m.masimov@mt-integration.ru>
Cc: Shichangkuo <shi.changkuo@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd1261b16d upstream.
commit 4eb7b93e03 ("ocfs2: improve write IO performance when
fragmentation is high") introduced another regression.
The following ocfs2-test case can trigger this issue:
> discontig_runner.sh => activate_discontig_bg.sh => resv_unwritten:
> ${RESV_UNWRITTEN_BIN} -f ${WORK_PLACE}/large_testfile -s 0 -l \
> $((${FILE_MAJOR_SIZE_M}*1024*1024))
In my env, test disk size (by "fdisk -l <dev>"):
> 53687091200 bytes, 104857600 sectors.
Above command is:
> /usr/local/ocfs2-test/bin/resv_unwritten -f \
> /mnt/ocfs2/ocfs2-activate-discontig-bg-dir/large_testfile -s 0 -l \
> 53187969024
Error log:
> [*] Reserve 50724M space for a LARGE file, reserve 200M space for future test.
> ioctl error 28: "No space left on device"
> resv allocation failed Unknown error -1
> reserve unwritten region from 0 to 53187969024.
Call flow:
__ocfs2_change_file_space //by ioctl OCFS2_IOC_RESVSP64
ocfs2_allocate_unwritten_extents //start:0 len:53187969024
while()
+ ocfs2_get_clusters //cpos:0, alloc_size:1623168 (cluster number)
+ ocfs2_extend_allocation
+ ocfs2_lock_allocators
| + choose OCFS2_AC_USE_MAIN & ocfs2_cluster_group_search
|
+ ocfs2_add_inode_data
ocfs2_add_clusters_in_btree
__ocfs2_claim_clusters
ocfs2_claim_suballoc_bits
+ During the allocation of the final part of the large file
(after ~47GB), no chain had the required contiguous
bits_wanted. Consequently, the allocation failed.
How to fix:
When OCFS2 is encountering fragmented allocation, the file system should
stop attempting bits_wanted contiguous allocation and instead provide the
largest available contiguous free bits from the cluster groups.
Link: https://lkml.kernel.org/r/20250414060125.19938-2-heming.zhao@suse.com
Fixes: 4eb7b93e03 ("ocfs2: improve write IO performance when fragmentation is high")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
