access-controllers is an optional property that allows to refer to
domain access controller.
The RCC driver will be able to check if we are allowed to register
clocks for a peripheral.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20240419152723.570159-2-gabriel.fernandez@foss.st.com
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Miscellaneous fixes and improvements.
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on R-Car
V4M,
- Add interrupt controller (PLIC) clock and reset on RZ/Five,
- Prepare power domain support for RZ/G2L family members, and add
actual support on RZ/G3S SoC.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZitbAgAKCRCKwlD9ZEnx
cOv3AQCeITT+A5qog/T6uzT62sg04KTLSvuwbg/zKWaWZHVjMwEAlYF3OOw4UgBT
AvVQPfm6dth8xtmWdLT0ulPD5XYq7gc=
=mTx5
-----END PGP SIGNATURE-----
Merge tag 'renesas-clk-for-v6.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas
Pull more Renesas clk driver updates from Geert Uytterhoeven:
- Miscellaneous fixes and improvements
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on R-Car V4M
- Add interrupt controller (PLIC) clock and reset on RZ/Five
- Prepare power domain support for RZ/G2L family members, and add
actual support on RZ/G3S SoC
* tag 'renesas-clk-for-v6.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r9a08g045: Add support for power domains
clk: renesas: rzg2l: Extend power domain support
dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S
dt-bindings: clock: r9a08g045-cpg: Add power domain IDs
dt-bindings: clock: r9a07g054-cpg: Add power domain IDs
dt-bindings: clock: r9a07g044-cpg: Add power domain IDs
dt-bindings: clock: r9a07g043-cpg: Add power domain IDs
clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INIT
clk: renesas: r8a7740: Remove unused div4_clk.flags field
clk: renesas: r9a07g043: Add clock and reset entry for PLIC
clk: renesas: r8a779h0: Add INTC-EX clock
clk: renesas: r8a779h0: Add MSIOF clocks
clk: renesas: r8a779a0: Fix CANFD parent clock
- fix autoloading sunxi-ng clocks when build as a module
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSPRixG1tysKC2PKM10Ba7+DO8kkwUCZivVwgAKCRB0Ba7+DO8k
k1niAP4+uMNL09uAdVmRP8KEcD8GFMTABjMhlCXKyX1XEwiYRAD/fFx+9RjefSSu
Hcvo/V3sD5jB2hpcUQsvVsWCNU3tDA8=
=J3gq
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner
Pull Allwinner clk driver updates from Jernej Skrabec:
- Add additional constraints to A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module
* tag 'sunxi-clk-for-6.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: fix module autoloading
clk: sunxi-ng: a64: Add constraints on PLL-MIPI's n/m ratio and parent rate
clk: sunxi-ng: nkm: Support constraints on m/n ratio and parent rate
Instantiate power domains for the currently enabled IPs of the R9A08G045
SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240422105355.1622177-8-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/{G2L, V2L, G3S}-based CPG versions have support for saving extra
power when clocks are disabled by activating module standby. This is
done through MSTOP-specific registers that are part of CPG. Each
individual module has one or more bits associated with one MSTOP
register (see table "Registers for Module Standby Mode" from HW
manuals). Hardware manual associates modules' clocks with one or more
MSTOP bits. There are 3 mappings available (identified by researching
RZ/G2L, RZ/G3S, RZ/V2L HW manuals):
case 1: N clocks mapped to N MSTOP bits (with N={0, ..., X})
case 2: N clocks mapped to 1 MSTOP bit (with N={0, ..., X})
case 3: N clocks mapped to M MSTOP bits (with N={0, ..., X}, M={0, ..., Y})
Case 3 has been currently identified on RZ/V2L for the VCPL4 module.
To cover all three cases, the individual platform drivers will provide
the clock driver with MSTOP register offsets and associated bits in this
register as a bitmask, and the clock driver will apply this bitmask to
the proper MSTOP register.
The MSTOP support was implemented through power domains.
Platform-specific clock drivers will register an array of type struct
rzg2l_cpg_pm_domain_init_data, which will be used to instantiate
properly the power domains.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240422105355.1622177-7-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The driver will be modified (in the next commits) to be able to specify
individual power domain IDs for each IP. The driver will still
support #power-domain-cells = <0>, thus, previous users are not
affected.
The #power-domain-cells = <1> has been instantiated only for RZ/G3S at
the moment, as individual platform clock drivers need to be adapted for
this to be supported on the rest of the SoCs.
Also, the description for #power-domain-cells is updated with links to
per-SoC power domain IDs.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240422105355.1622177-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
In "struct div4_clk", the "flags" field is unused.
Remove it, and update the "div4_clks" array accordingly.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/658e6b1b23d5b66646bb830361b8c55ccf797771.1713025170.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Provide the CLK framework callbacks related to get/set clock duty cycle if
the related SCMI clock supports OEM extended configurations.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-6-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some exposed SCMI Clocks could be marked as non-supporting re-parenting
changes.
Configure a clk_ops descriptor which does not provide the re-parenting
callbacks for such clocks when registering with CLK framework.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-5-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some exposed SCMI Clocks could be marked as non-supporting rate changes.
Configure a clk_ops descriptors which does not provide the rate change
callbacks for such clocks when registering with CLK framework.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-4-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some exposed SCMI Clocks could be marked as non-supporting state changes.
Configure a clk_ops descriptor which does not provide the state change
callbacks for such clocks when registering with CLK framework.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-3-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SCMI Clocks descriptors expose an increasing number of properties, thing
which, in turn, leads to a varying set of supported CLK operations to be
associated with each clock.
Providing statically pre-defined CLK operations structs for all the
possible combinations of allowed clock features is becoming cumbersome and
error-prone.
Allocate the per-clock operations descriptors dynamically and populate it
with the strictly needed set of operations depending on the advertised
clock properties: one descriptor is created for each distinct combination
of clock operations, so minimizing the number of clk_ops structures to the
strictly minimum needed.
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: linux-clk@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240415163649.895268-2-cristian.marussi@arm.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
According to 9FGV0241, 9FGV0441 & 9FGV0841 datasheets, the default
value for the clock amplitude is 0.8V, while the driver assumes 0.7V.
Additionally, define constants for default values for both clock
amplitude and spread spectrum and use them.
Fixes: 892e0ddea1 ("clk: rs9: Add Renesas 9-series PCIe clock generator driver")
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240415140348.2887619-1-catalin.popescu@leica-geosystems.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
To have a working display through DPI, a workaround has been
implemented downstream to add "mm_dpi0_dpi0" and "dpi0_sel" to
the DPI node. Shortly, that add an extra clock.
It seems consistent to have the "dpi0_sel" as parent.
Additionnaly, "vpll_dpix" isn't used/managed.
Then, set the "mm_dpi0_dpi0" parent clock to "dpi0_sel".
The new clock tree is:
clk26m
lvdspll
lvdspll_X (2, 4, 8, 16)
dpi0_sel
mm_dpi0_dpi0
Fixes: d46adccb79 ("clk: mediatek: add driver for MT8365 SoC")
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://lore.kernel.org/r/20231023-display-support-v3-12-53388f3ed34b@baylibre.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table. Clocks are considered core
components, so usually they are built-in, however these can be built and
used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240410155420.224157-1-krzk@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner A64 manual lists the following constraints for the
PLL-MIPI clock:
- M/N <= 3
- (PLL_VIDEO0)/M >= 24MHz
Use these constraints.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-4-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner A64 manual lists the following constraints for the
PLL-MIPI clock:
- M/N <= 3
- (PLL_VIDEO0)/M >= 24MHz
The PLL-MIPI clock is implemented as ccu_nkm. Therefore, add support for
these constraints.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-3-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
This driver is intended for the STM32MP25 clock family and utilizes
the stm32-core API, similar to the stm32mp13 clock driver.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20240411092453.243633-4-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
RCC driver uses '.index' to define all parent clocks instead '.names'
because the use of a name to define a parent clock is discouraged. This
is an ABI change, but the RCC driver has not yet merged, unlike all
others drivers besides Linux.
Fixes: b5be49db3d ("dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240411092453.243633-3-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver only supported loongson-2K1000 at first, but the clock
structure of loongson-2K0500 and loongson-2K2000 are actually similar,
and I tried to refactor the whole driver to adjust to the addition of
the new platform.
Briefly, I have divided all clocks into three categories according to
their properties and their parent clocks: Independent PLLs, clocks based
on frequency scales, and clock dividers.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/fb020d1ca19e6f4cdcc95c87b2748869ca76b8ec.1712731524.git.zhoubinbin@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
[sboyd@kernel.org: Drop clk.h include]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In the new Loongson-2K family of SoCs, more clock indexes are needed,
such as clock gates.
The patch adds these clock indexes
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/76844e0e4dae290425f7c8025f7f36810cb3a3a8.1712731524.git.zhoubinbin@loongson.cn
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Support for fhctl clocks in apmixedsys was introduced at a later point
and to this moment only one mt6795 based platform has a fhctl DT node
present. Therefore the fhctl support in apmixedsys should be seen as
optional and not cause an error when it is missing.
Change the message's log level to warning. The warning level is chosen
so that it will still alert the fact that fhctl support might be
unintentionally missing, but without implying that this is necessarily
an issue.
Even if the FHCTL DT nodes are added to all current platforms moving
forward, since those changes won't be backported, this ensures stable
kernel releases won't have live with this error.
Fixes: d7964de8a8 ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240308-mtk-fhctl-no-node-error-v1-1-51e446eb149a@collabora.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Introduce en_clk_soc_data data structure in order to define multiple
clk_ops for each supported SoC. This is a preliminary patch to
introduce EN7581 clock support.
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/562a0da8d7874a02a324687c152c87a1549924bd.1712399981.git.lorenzo@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
